1992 Honda Prelude: Introductory Machinery

Saving a Honda Prelude from the Scrap Yard (full build+Turbo)

Özbək Mahnısı Şirin Qizin Reqsi İlə Trend Oldu 😍

Smart Sigma Kid #funny #sigma #comedy

КОЛИЧЕСТВО СЛОВ! Не говори, иначе зашьют рот 👹☠️

Как пробить тяжелый танк Объект 279 Ранний в Мир Танков? #wot #миртанков

Completely Restoring A 1992 Honda Prelude In 32 Minutes

Full Throttle Performance Speed Shop

Подписаться 2 тыс.

Просмотров 18 тыс.

50% 1

Видео Поделиться Скачать Добавить в

On this episode of FTP Speed Shop We do a complete overview of the building of Project Prelude from Start to Finish!
Thanks for your support make sure you LIKE, Comment, SUBSCRIBE, and use my links below it really helps me out!
Check out our website:
www.Ftpspeedshop.com
My Amazon/Ebay Links:
www.amazon.com/ref=as_li_ss_t...
Tools:
Parts:
Video Equipment:
GoPro 7 White: amzn.to/31RjkFj
GoPro Hero 5 Black: amzn.to/2Sm7uzy
GoPro Hero 8 Black: amzn.to/39wVa7M
GoPro Media Mod Hero8 Black: amzn.to/39uu8xH
GoPro Hero 9 Black: amzn.to/3KzkeMG
Sevenoaks MicRig: amzn.to/3kQcadg
RodeLink Lav Mic: amzn.to/3mMWfzg
Rode Video Micro Mic: amzn.to/3qGB0jA
Sony ICD Voice Recorder: amzn.to/3EFqNsJ
Disclosure: We get a small commission when you purchase products via our Amazon links, this doesn’t cost you anything extra, it’s a cut that comes out on Amazon’s end. But please be aware the Amazon links provided are affiliate links.

Авто/Мото

Опубликовано:

27 апр 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@fabianmartinez252 Год назад

I’m not one to comment but I can’t wait for next year. I hope I can get my prelude fixed this video motivated me

@FullThrottlePerformanceMike Год назад

Hell yea I finally got my new ecu the other week so I can start tuning and enjoy this car.

@MartinSanchez-sk6zo Год назад

I hope you get your prelude goin bro

@FullThrottlePerformanceMike Год назад

@@MartinSanchez-sk6zo Nebraska winters always put a damper on enjoying the cars.

@pianoreeves4129 Год назад

Amazing work, I bought an 92 Prelude as my first car, it was sitting for a few months and the previous owner did swap the engine to an modified h22, it originally was a 2.0. Although he did a great job there still a lot of things to do. Sadly I fell in a deep dpression around the same time and wasted all my money because of an bad addiction. I went Rehab and in a psychiatric treatment center this year and this video just made me so happy and motivated, now I can't wait to save some money and finally work on my Prelude. I really appreciate your project (sry if my English is not the best)

@FullThrottlePerformanceMike Год назад

Good job on getting your life turned around. Keep your hands and head busy. Get out there and start working on the car as often as possible. If you take time off, you lose motivation, and it's hard to get started again. If you have any questions about what I did, just ask!

@tommiebartley3081 Месяц назад

Absolutely amazing body work and clean engine bay. The IM mod was wild! Just found your channel, going to see what other prelude updates are waiting for me! Wish I bought a set of JDM headlights back in the day when they were plentiful.....

@FullThrottlePerformanceMike Месяц назад

Thank you so much! I'm balls deep in project Twin Snail Mail at the moment, trying to get it done for Power Tour 2024. But once that is completed, I will get back to the Prelude. Parts are getting so hard to find/afford for these cars. They are so cool and ahead of their time when built. If you have any questions, just ask!

@user-oy7qx1vo1r 11 месяцев назад

prelude gang!!!!!!

@FullThrottlePerformanceMike 11 месяцев назад

Hell yea!!!

@Lost10mm. 5 месяцев назад

Really appreciate this my cb7 restore is almost as bad but it's rewarding once you get to put it back together.

@FullThrottlePerformanceMike 5 месяцев назад

Dude it was a 2 year project and it's still not 100% I have so many projects it's hard to stay focused.

@Lost10mm. 5 месяцев назад

@FullThrottlePerformanceMike that's actually in pretty good time, mine has already taken at least two years to get where I'm at and I haven't even started any body work on it. But my build ended up getting mice in it and it's the 1 year only cb7 se, so interior stuff is extremely hard to find. You did a amazing job, really can't wait to start posting mine from rat's nest back to glory.

@FullThrottlePerformanceMike 5 месяцев назад

@Lost10mm. well good luck with your project !

@joshuawikoff2945 2 года назад

Badass prelude, good choice!

@FullThrottlePerformanceMike 2 года назад

Thanks Man

@jonmotes5406 Год назад

Awesome job! I just picked up a ‘93, it’s black…super excited to fix it up. I’m debating on documenting it as well… 🤔 Thanks for sharing!

@FullThrottlePerformanceMike Год назад

Thanks. If I were you, I would it's cool to be able to look back and see the fruits of your labor.

@kwangnam9993 Год назад

Yeah BUDDY! That looks goooooood!!!

@FullThrottlePerformanceMike Год назад

Thank you

@Exhaust_power Год назад

One of the reasons I dont want my glass taken out. Seals are non-existent? and glass can be hard to find. good job on the build, the prelude looks awsome. Got scared watching you push the engine stand off the ledge lol

@FullThrottlePerformanceMike Год назад

Thanks. Yea the rear glass seal was trashed anyway.... I definitely didn't plan on breaking the back glass.

@dirk9379 Год назад

Well done sir! It is a realy nice car.

@FullThrottlePerformanceMike Год назад

Thank you

@darbymcbride41 2 года назад

Enjoyed watching this. I just bought a 96 si with a blown h23 due to hydrolocking hilariously enough from being driven through a puddle. H22a sitting on deck. OEM black car. Want to have the abs deleted, proper a/c delete, and a wire tuck performed. Watching how you shaved the bay and how you went about tucking the harness I found helpful.

@FullThrottlePerformanceMike 2 года назад

Dude it was so much work shaving this bay. I shaved the bay in my chevelle and it was a walk in the park compared to the Lude.... however it was 100% worth the effort, it looks so good. The harness is another story too haha I have done a few other whole car wires and the Prelude was so much more involved. But a basic engine bay wire took would be the way I would go again. Thanks for watching

@darbymcbride41 2 года назад

@@FullThrottlePerformanceMike thank you for replying :) cheers

@bobbyserchion 4 месяца назад

Awesome job guys and video keep it going😊😅😂

@FullThrottlePerformanceMike 4 месяца назад

Thank you! Will do!

@tonijohnson09 7 месяцев назад

When I was going to buy my first car. It was between a Honda Prelude and a Turbo charged Tercel Coupe. I chose the Tercel but I still wondered about this car. Still love them.

@FullThrottlePerformanceMike 7 месяцев назад

It's hard to pass on the boost. But the Prelude was just so ahead of its time, and the interior was so much better than anything else in the 90s

@tonijohnson09 7 месяцев назад

@@FullThrottlePerformanceMike definitely was the boost. Excellent restoration ✨🔥🔥

@FullThrottlePerformanceMike 7 месяцев назад

@tonijohnson09 I did it backwards and waited until I was 35 before finding boost. Wish I could have found it younger haha

@rustybritches6747 11 месяцев назад

I need another prelude! It would be #7 I think, they're getting harder and harder to find especially in good condition. I want another 3rd gen and H swap it, that would be sick!

@FullThrottlePerformanceMike 11 месяцев назад

They really are getting hard to find, and nice parts are almost non-existent. I love the H series motors! Someday I would love to H swap a first gen.

@rustybritches6747 11 месяцев назад

@@FullThrottlePerformanceMike good luck finding a 1st gen last one I saw for sale was 12.5k I think the 3rd generation is perfect for an h swap because they handle so good there so nimble the a-pillars are so thin only major issue would be oil pan clarence but even that could be fixed the added weight in the front would make it understeer a bit but man that would be such a great car, if you've ever driven a 3rd gen or get the chance to you would get it!

@FullThrottlePerformanceMike 11 месяцев назад

@rustybritches6747 I have only driven 4th and 5th gens I rode in a first gen a few times. The 5th gen seemed over weight and sluggish to me but I loved my old 4th gen such a fun car.

@reallym99manualtransmissionguy Год назад

...great video dude, you about had me in tears lol...

@FullThrottlePerformanceMike Год назад

Thanks for the Sub!!!

@alejandrojdm1560 Год назад

Que linda quedó.. perfecta. 👍🏻🔰😎

@FullThrottlePerformanceMike Год назад

Thanks

@HeavyHookSet14 Год назад

Been hunting RU-vid for about the past year trying to find ideas on what to do with my 92 si and by far this is the best video I've found. My question is how can I find information on what can be deleted etc. I'm trying to end up with a very clean and simple engine bay and I think that's the main goal. I'd appreciate any help, I'm working with an h23a3.

@FullThrottlePerformanceMike Год назад

I have a few other videos where I go over what I deleted and how I made the harness. I think the biggest thing is to make your harness and hide/tuck all your wires. Little stuff like running wires under the intake make a huge difference. Check out my Project Prelude Playlist for more detailed videos on what I did for each area of the car

@38sosa63 8 месяцев назад

really hoping you see this do you have a tips on where to disconnect the drivers door wire harness from the connector. i need to do a driver door swap

@FullThrottlePerformanceMike 8 месяцев назад

It has been a while since I messed with prelude doors. But I'm about 90% positive. I disconnected everything inside the door (Locks, power windows, speakers, switches). Pull the harness out the front of the door.

@davidcassia1595 11 месяцев назад

I’m buying a 1992 prelude next week Friday for 2k it’s only got 128k miles on it body is hella clean no rust same with underneath now the guy who had it before painted it a bad color it’s just rattle sprayed on I’m hoping it build the car up

@FullThrottlePerformanceMike 11 месяцев назад

First thing you need to do is drive the car and love it!!!! Second thing is if you live in a place where it gets wicked cold is strip that bitch down and repaint it. You could probably do a better job on your first time paint job with real paint over rattle can. If you have any questions about painting please ask them!

@davidcassia1595 11 месяцев назад

@@FullThrottlePerformanceMike yeah imma be honest I live in Wisconsin and the winters here are harsh but I’m buying this thing for 2k I feel like I can get it lower but I’ll try to talk to guy down it’s a buddy from school I go with

@FullThrottlePerformanceMike 11 месяцев назад

@@davidcassia1595 they are super fun cars.

@letsgobrandon1300 Год назад

Bummer on the glass. In about '09 I bought a '93 prelude for $200 that the p.o. I think threw a rock through the back glass when he had a bad day. . I went to a junkyard where they pull the parts and stock them. The desk guy was surprised when he looked and they had 2 old rear windscreens. ($100) I took it to my mechanic and said fix her up so it will pass inspection. ... $1000 later she had a sticker! Ouch. But I loved that car for 20,000+ miles . Miss her a lot. Especially the interior(the digital gauges) except no arm rest! Rust spread until it was worth fixing the exhaust and brakes.

@FullThrottlePerformanceMike Год назад

Yea the back glass had to be shipped in from a state or two away and was like 380 bux plus install. I wish I never would have sold my first lude but life happens. I built this one to match or be the car I wanted back in the day. It's a heck of a fun car I just to spend a few more bux to get a new computer and I can really have some fun with it.

@tracy_748 Год назад

Need to find me a prelude 🙏🙏

@FullThrottlePerformanceMike Год назад

They are out there, but.... parts are getting harder to find.

@KickDiesel1 Год назад

My 92 been sitting in my garage for 16yrs. 92 Black Si h23 on 17's. Giving me inspiration. Great build do you have ig to follow?

@FullThrottlePerformanceMike Год назад

Ftp_speed_shop is my ig. Get out there and get to work! One day and hour at a time, you will get it done!

@user-yn7un8gu6g Год назад

❤❤❤❤❤

@FullThrottlePerformanceMike Год назад

Thanks

@thomassprague9656 Год назад

Beautiful Lude. I'm restoring/ building my 94. Do you know of any resources as far as window molding? Especially for the front and back windows? Thank you.

@FullThrottlePerformanceMike Год назад

I don't I had to go with aftermarket windshield molding. Your best bet is to get on the Prelude Facebook groups there are a few nee parts out there but you are going to pay for them.

@thomassprague9656 Год назад

@@FullThrottlePerformanceMike Thank you. Price is no problem. I just want my Lude as nice as possible.

@danielhodge95 2 года назад

Have you done a h23a euro r intake manifold with a 3prong iacv tune/delete?

@FullThrottlePerformanceMike Год назад

As far as I know it's the JDM intake

@manuelgutierrez7568 2 года назад

Sweet prelude I have a 95 I hope to have resorted.

@FullThrottlePerformanceMike 2 года назад

1 hour a day you can get it done..... and some 14 hour days!

@jasonbarrow1824 2 года назад

have the same i think got a few issues but I'm hyped just need a transmission bought a engine

@FullThrottlePerformanceMike 2 года назад

@@jasonbarrow1824 heck yeah man get it going these cars are getting far and few between. Keep cool cars on the road!!!!

@jasonbarrow1824 2 года назад

@@FullThrottlePerformanceMike I'll try im in barbados so parts even more difficult but hey that's tye fun part

@FullThrottlePerformanceMike 2 года назад

@@jasonbarrow1824 I do have some parts left over from part outs if you need something hit me up.

@bryann9692 Год назад

amazing work bro , what's the wheels rims reference model ?

@FullThrottlePerformanceMike Год назад

Thank you. RSX type S rims.

@ronchellemoloboco6123 Год назад

where did you get the aftermarket front sub frame?

@FullThrottlePerformanceMike Год назад

Here is a link to the kit I bought on amazon. amzn.to/3Tif7nb

@hasnolgt2165 Год назад

Tell me where did you buy the quarter glass with the molding!? Im from brunei

@FullThrottlePerformanceMike Год назад

I had them from the car originally and or the 2 other cars I parted out over the years

@hasnolgt2165 Год назад

@@FullThrottlePerformanceMike disappointed abit because mine the molding flaring. Anyway thanks mike🙂

@FullThrottlePerformanceMike Год назад

@@hasnolgt2165 They are hard to find in good shape. And there is nothing on the after market.

@po3a_po6ot56 Год назад

Старания оправдали себя, топовая работа

@FullThrottlePerformanceMike Год назад

Спасибо

@Sokos-Stupid-Masterpiece 7 дней назад

What are the wheels and offset? I love the stance and I want to recreate on mine

@FullThrottlePerformanceMike 6 дней назад

I'm not sure what the offset is they are the factory 17" 2005-2006 Acura RSX type S rims

@FullThrottlePerformanceMike 6 дней назад

17" rim 5x114.3 bolt pattern 45mm offset

@STEVE-ob5ru Год назад

I want to send you mine 🥺❤️

@FullThrottlePerformanceMike Год назад

Thanks I wish I had enough time to take on more projects but I cant even keep up with all of my projects. Twin Snail Mail it in the middle of its build, The Shevelles new motor is waiting on parts and me to build it, the Prelude needs axle seals and the new ecu setup and I just got a hood for it. So that needs body worked and painted.

@iidrippykingii Год назад

How much this cost total?

@FullThrottlePerformanceMike Год назад

That's tough to say. I have been collecting parts for years and did all the work myself. If I had to give you my best guess the last phase (stuff I videoed) was about 8 grand. The total of the "collected" stuff 5 lug swap, rims, parts cars, engine would probably be somewhere around 4 grand. So 12 grandish and I still don't have a hood

@thomassprague9656 Год назад

I was wondering if you provide this service to potential customers? I expect something of this caliber would start at $20,000 at least. I'd be willing to pay that and more. Please let me know. Thank you.

@FullThrottlePerformanceMike Год назад

I really appreciate the kind words but I don't it's just my projects.

@warmbeef4you833 Год назад

Bro do you see stickers on unicorns????

@FullThrottlePerformanceMike Год назад

Never seen a unicorn so I can't say.

@darbymcbride41 2 года назад

If you know where to find replacement weatherstripping and door/window rubber please hook a brotha up and let me know your source. Having a hard time

@FullThrottlePerformanceMike 2 года назад

Haha it's called parting cars out 10 plus years ago and storing shit!!! I do have one decent outer window door seal (I think pass side) I may have a okish driver's side I will need to look contact me thru email with what you are looking for ftpspeedshop@gmail.com

@darbymcbride41 Год назад

@@FullThrottlePerformanceMike I sent ya an email from my Hotmail account. Thanks much

@johnnyghoul8100 4 месяца назад

People on the forums and marketplace ItS JuST a HoNda best i can do is 3k 😂clowns

@FullThrottlePerformanceMike 4 месяца назад

These cars are becoming so rare that the value has no choice but to go up.

@enki1597 2 месяца назад

I used to own a 93 Prelude 24 years ago in high school. I sold it to get a truck for work. Im looking to get another one for a project car. Is it really hard getting parts for these cars nowadays?

@FullThrottlePerformanceMike 2 месяца назад

I owned my first one about 22 years ago and sold it to get a truck for work also. Never should have done that. Yes, nice parts are hard to come by, and they are expensive. But there are always a few of them being parted on Facebook groups. You won't find an aftermarket metal hood they don't make them anymore thats why I went with a carbon fiber hood. I would still recommend getting one they are just such cool cars. They were way ahead of their time in the styling.

Далее

1992 Honda Prelude: Introductory Machinery

26:06

1992 Honda Prelude: Introductory Machinery

Просмотров 56 тыс.

Saving a Honda Prelude from the Scrap Yard (full build+Turbo)

48:49

Saving a Honda Prelude from the Scrap Yard (full build+Turbo)

Просмотров 47 тыс.

Özbək Mahnısı Şirin Qizin Reqsi İlə Trend Oldu 😍

00:27

Özbək Mahnısı Şirin Qizin Reqsi İlə Trend Oldu 😍

Просмотров 961 тыс.

Smart Sigma Kid #funny #sigma #comedy

00:26

Smart Sigma Kid #funny #sigma #comedy

Просмотров 8 млн

КОЛИЧЕСТВО СЛОВ! Не говори, иначе зашьют рот 👹☠️

00:36

КОЛИЧЕСТВО СЛОВ! Не говори, иначе зашьют рот 👹☠️

Просмотров 2,3 млн

Как пробить тяжелый танк Объект 279 Ранний в Мир Танков? #wot #миртанков

01:00

Как пробить тяжелый танк Объект 279 Ранний в Мир Танков? #wot #миртанков

Просмотров 405 тыс.

Restoring an Abandoned 1992 Honda Civic EG6 | EP. 2 - Chassis Overhaul

29:54

Restoring an Abandoned 1992 Honda Civic EG6 | EP. 2 - Chassis Overhaul

Просмотров 308 тыс.

If Steve Jobs Built a Honda Prelude | Bumper 2 Bumper

13:00

If Steve Jobs Built a Honda Prelude | Bumper 2 Bumper

Просмотров 1,8 млн

Engine Swaps are Getting Out of Hand

12:52

Engine Swaps are Getting Out of Hand

Просмотров 3,5 млн

Honda prelude H22 step by step cylinder head disassembly removal

36:09

Honda prelude H22 step by step cylinder head disassembly removal

Просмотров 17 тыс.

1992 Honda Prelude SH | Why Everyone Loves 90’s Hondas

7:41

1992 Honda Prelude SH | Why Everyone Loves 90’s Hondas

Просмотров 9 тыс.

After 25 YEARS of Waiting, This Honda 89 CRX is Completely Restored to Show Room Quality

16:44

After 25 YEARS of Waiting, This Honda 89 CRX is Completely Restored to Show Room Quality

Просмотров 277 тыс.

K20 Swapped Third Gen Prelude

8:57

K20 Swapped Third Gen Prelude

Просмотров 40 тыс.

Honda Prelude Suspension Refresh

32:53

Honda Prelude Suspension Refresh

Просмотров 10 тыс.

Massive Progress On The 3rd Gen Honda Prelude Restoration!

14:43

Massive Progress On The 3rd Gen Honda Prelude Restoration!

Просмотров 6 тыс.

Prelude Project Begins - Honda Engine Tune Up and Repairs

34:59

Prelude Project Begins - Honda Engine Tune Up and Repairs

Просмотров 17 тыс.

Машина Жириновского. #shorts Лиса рулит

0:52

Машина Жириновского. #shorts Лиса рулит

Просмотров 5 млн

Mercedes S500 500+л.с. vs ВАЗ 2106 САТАНА на КАРБЕ 🚀 #автоврн #тазывалят #турбоваз #mercedes #s500

0:53

Mercedes S500 500+л.с. vs ВАЗ 2106 САТАНА на КАРБЕ 🚀 #автоврн #тазывалят #турбоваз #mercedes #s500

Просмотров 3,4 млн

Он открыл очень интересный бизнес с колёсами в гараже

0:28

Он открыл очень интересный бизнес с колёсами в гараже

Просмотров 5 млн

ZİNCİRLEME TIR KAZASI OLACAKTI SON ANDA KURTARDI #truck #shorts

0:18

ZİNCİRLEME TIR KAZASI OLACAKTI SON ANDA KURTARDI #truck #shorts

Просмотров 1,7 млн

Mercedes S500 500+л.с. vs ВАЗ 2106 САТАНА на КАРБЕ 🚀 #автоврн #тазывалят #турбоваз #mercedes #s500

0:53

Mercedes S500 500+л.с. vs ВАЗ 2106 САТАНА на КАРБЕ 🚀 #автоврн #тазывалят #турбоваз #mercedes #s500

Просмотров 3,4 млн

Греция НЕ ПРОПУСТИЛА МОТОЦИКЛ🥹 #мотоТаня 4000км от дома. Greecedidn't let the motorcycle through

0:15

Греция НЕ ПРОПУСТИЛА МОТОЦИКЛ🥹 #мотоТаня 4000км от дома. Greecedidn't let the motorcycle through

Просмотров 1,3 млн

Мотоцикл за 10 000 рублей!!! 😳 до конца

0:29

Мотоцикл за 10 000 рублей!!! 😳 до конца

Просмотров 1,5 млн