In this video I am making a box to soundproof my compressor which is connected to my compressed air circuit, this box is made of wood covered with sound-absorbing foam over its entire interior surface.
The air inlet and outlet are made by baffle to prevent the noise from escaping through the.
The electric motor of the compressor is fitted with a fan on its shaft to force the extraction.
I install a temperature sensor with a compressor cut-off if the temperature rises too much inside the box.
I started by putting silent blocks on my compressor (compression head and engine), to reduce the noise linked to strong vibrations.
The noise reduction of my compressor is more than sufficient for my taste, I think it's a whole, the silent blocks, the soundproofing box with acoustic foam, the silencer and of course the distance thanks to my air circuit compressed.
This box and these baffles for soundproofing were glued with white glue and stapled with a senco pneumatic stapler.
This soundproofing box can also be suitable for reducing the noise of a booster, a pump, a motor, a vacuum cleaner or other noisy things.
I made this box because I was fed up with noise in the workshop, it allows me to remove my noise-canceling headphones in the workshop.
Do not hesitate to send me your realization on Instagram and tell me the change you felt.
Here are links to what I used or similar material:
Cheapest acoustic foam I have found: www.panasorb.eu/
Box with probe to protect in case of heating in the box: amzn.to/3xngEOU
Silent bloc M6: amzn.to/2PiNXBz
Silent bloc M8: amzn.to/32FDeV0
Silent bloc M10: amzn.to/3sROSGJ
Silent bloc M12: amzn.to/2PgNTlM
Loctite thread locker: amzn.to/3sNeXqC
Wood glue: amzn.to/3niYIjL
Tools used
Noise canceling headphones 3m amzn.to/3jI2Oi6
Dust mask: amzn.to/3s6gTeP
Steel forest box amzn.to/34AFwXg
Miter saw metabo amzn.to/35HAHL3
Bosch pro miter saw stand (very stable by the way) amzn.to/3oCx41x
Miter saw disc cmt amzn.to/2TGdcMB
Circular saw bosch pro gks65ce amzn.to/3kiaZSu
00:00 Intro
02:57 box
04:46 outer casing with baffle
08:54 laying foam
13:32 installation of silent blocks
15:30 test without box
16:07 setting up the box
16:46 manufacturing plus installation of the silent support
18:51 set up plus test case with temperature probe
20:07 test with box, silent block and silencer
20:33 ventilation / heating test of the box on full recharge
21:41 workshop test
22:48 review
⏩ How to follow me ⏪
🔽
On Instagram ➡️
/ sem.concept
On Facebook ➡️
/ sem.concept
27 июл 2024