Computer Chair Sinking Problem - Easy Fix

Подписаться 131 тыс.

Просмотров 297 тыс.

50% 1

► Buy Links (affiliate):
IN: amzn.to/2NgwFk6
UK: amzn.to/3fHWDJs
US: amzn.to/2YiOkhl
CA: amzn.to/2LwlODr
AU: amzn.to/3ekugR4
DE: amzn.to/2Yi4NCv
FR: amzn.to/2NbrTnX
Computer Chair Sinking Problem - Easy Fix
--------------------------------------------------------------------------------------------------------------------------
Best Deals on Amazon India:
Best Smartphone Deals: amzn.to/3bCceI6
Best TV Deals: amzn.to/3bYf22b
Best Laptop Deals: amzn.to/3dQeug9
Best Gaming Laptop Deals: amzn.to/2Ly2sfh
Best Smartwatch Deals: amzn.to/2X0GabB
Amazon Echo Devices:
Echo Dot 3rd Gen: amzn.to/3bwpVYY
Echo Show 5: amzn.to/3cGi3FM
Fire Stick 4K: amzn.to/3dS7Oy9
Fire Stick:amzn.to/2AucZ92
------------------------------------------------------------------------------------------------------------------------
Best Deals on Amazon US:
Best TV Deals: amzn.to/2TEpgP8
Best Smartphone Deals: amzn.to/2zrPxcr
Best Laptop Deals: amzn.to/3goarKm
Best Gaming Laptop Deals: amzn.to/3d28gtw
Amazon Echo Devices:
Echo Dot 3rd Gen:amzn.to/3cZVtIl
Echo Show 5: amzn.to/3edJkj2
Fire Stick 4K: amzn.to/2AZ4Zxc
Fire TV Stick:amzn.to/3d2yrQV
-----------------------------------------------------------------------------------------------------------------------------
Best Deals on Amazon UK:
Best TV Deals: amzn.to/2Xx9NRN
Best Smartphone Deals: amzn.to/3bWfu12
Best Laptop Deals: amzn.to/36v88Al
Best Gaming Laptop Deals: amzn.to/2TDD24C
Amazon Echo Devices:
Echo Dot 3rd Gen: amzn.to/3c2rNZB
Echo Show 5: amzn.to/3c4GRpH
Fire TV Stick 4K: amzn.to/3ekflGm
Fire TV Stick: amzn.to/2Xy8Ysh
-----------------------------------------------------------------------------------------------------------------------------
Amazon Storefront and Recommendations
IN: www.amazon.in/shop/techlifestyle (affiliate links)
US: www.amazon.com/shop/techlifes...

Наука

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 281

@chrisgomez3291 2 года назад

I didn't want to go through the work of cutting a pvc tube like some of the other videos I found on youtube; primarily since the desk/chair I use is shared among the family and we all have different height preferences/needs. After feeling skeptical about this fix I figured if it worked for everyone else (in the comments) then I have nothing to lose. Let me tell you, if you're like me and you're not sure at first glance at this video, IT WORKS! Took me like 3min to do and most of that was just looking for a flathead screwdriver since the tools are shared in the house as well. I've been sitting on my chair for about an hour now and the sinking issue which was almost instant upon sitting down is completely gone. I will provide updates if anything changes but WD-40 did the trick so far and I'm happy that this chair we share as a family is still adjustable. No fixed height like with a PVC pipe. I don't mind doing this quick fix as needed. Thank you!

@Poorbumi10 2 года назад

May i ask, how is it now?

@josephquijano9206 Год назад

Any follow-ups?

@joshuabeita3522 2 года назад

I used 3-in-one oil because it's a little heavier than WD40 and it fixed this problem immediately. I only had to do it once and I had the chair upside down so the oil ran down into the cylinder. Thanks for the information, it fixed an annoying problem.

@farouspopoola 8 месяцев назад

Can I use car engine oil??

@JohnYoga 6 месяцев назад

Thanks for that 3-in-1 tip; I will try this instead of WD40.

@stephanfowler8885 2 года назад

Pro tip, lubricate the rod at an angle so the lubricant drips down into the cylinder (the part under the chair). I'm not sure but I think it's more about lubricating the o-rings. My theory is that they get dried out and don't hold a proper seal. This actually works. I had to do it twice but it works.

@cece3194 2 года назад

possibly. I'll find out tomorrow. thx

@BillOweninOttawa 2 года назад

Works for a while. Just get a new cylinder.

@James-jx3ro 2 года назад

@@cece3194 so?

@hawaiidispenser 3 года назад

I was skeptical (how could oil solve a problem where something moves TOO MUCH?) but I've been sitting here 20 minutes after spraying it and I'm still at the same height. Thumbs up! Edit: OK, it still sinks but just takes about 25 minutes now instead of 10 minutes. Somewhat of an improvement but it didn't really solve the problem.

@xinixxagnix201 2 года назад

You need oil no WD40

@farouspopoola 8 месяцев назад

Can I use car engine oil??

@bgjblue 6 месяцев назад

Mine was working fine until I spraying it with WD40 for popping noises. The popping noises stopped, but now it SINKS!!🙄🙄🙄

@ecoinsectscreens5551 2 дня назад

I can;t believe it worked but it did, I tried it myself and I never believe in easy solutions. Great work!!! than you

@giovannibarone5292 3 года назад

Wow many many many respect!!! This was the first video I watched and practiced.. I fixed it within 15min.. thank you so much maestro🙏

@sorryguys1090 5 месяцев назад

Surprisingly it helped me with a chair that I've tried to fix by turning it upside down for about 24 hours (with no luck). Thanks a lot!

@hummelhannes2383 4 года назад

Thank you ! Great hint and perfect description. My armchair is almost like new again. I used for lubricating the good old Pjur Original - my preferred tool for lubricating everything at home (for example:door hinges).

@davidinark Год назад

Just did this to the chair in my office. Super easy fix that works like a champ! Thanks for the simple solution!

@chimalozie 3 года назад

Thank you very much for sharing this. Really helped. I Prefer this to the other videos where you have to add Pvc pipe and get stuck in just one position.

@neojvck 3 года назад

So simple to follow! Finished in minutes 👌

@rameshtiwari4500 2 года назад

Thank you so much! Used silicone oil which I generally use for my treadmill lubrication. Works perfectly fine.

@toodleoo88 Год назад

Thank you so much for your informative tutorial. I followed your easy instructions & now my chair height works perfectly again !

@uncomfortablyoversizedbrea6347 4 года назад

This is so simple and it works perfectly! Thank you so much :)

@xonianvideos9576 3 года назад

JUST DONE MY CHAIR AND I AM PLEASENTLY SURPIRSED ITS WORKED SO FAR AND SO EASY TOOK MINUTES

@MKOA100 Год назад

It works! Thanks. Saved me a lot of time and pain. I used Rapide DP-60 as I had ran out of WD40. Been seating on it for 30 mins and it has not moved a millimetre.

@mijalic1 2 года назад

Great instruction. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.

@adrianserradilla9446 3 года назад

funny how simple it is, I tried it on my own and worked like a charm. Thanks for this video!

@emmetpbyrne 3 года назад

Well that worked a treat, thanks man. Two minutes and all sorted.

@joeyurban4325 Год назад

I can’t believe this worked. It’s been driving me nuts for weeks. Thanks you.

@suprabhatsahoo6200 3 года назад

Thanks. It is a really helpful video. I fixed it up within 10 minutes by using petrolium gel.

@schew123 2 года назад

It works like magic - thank you for sharing this easy fix idea.

@brianfish8269 3 года назад

Thanks, I didn't really believe it would work,, as the spindle was already quite oily, but it did. Thanks again.

@DavidPsCaddy Год назад

WoW!! It really does work !!!! It was quick & easy!!! Thank you!!! After applying and a couple of strokes, my chair doesn't sink anymore and I've got the original soft 'bounce' when sitting restored as when it was new 20 years ago ... 🙂In my case, I used Rust Check coat & protect rustproofing that I've sprayed on many demanding jobs over the years. It's an oil which sticks well to anything you spray it on. I wouldn't mind having to spray it occasionally over the years if required ... :-)

@globallama8094 Год назад

It actually works! Took a couple of mins for WD to sink in. After that worked out well. Thanks!

@cosmicglitter Год назад

Beyond all things I understand, this fast and simple trick worked - so far. Immediate improvement after the first go on a four year old DX Racer

@sandeshchaudhari36 Год назад

Literally 5 min....I was able to fix my sinking chair...thanks!

@Console_Corsia Год назад

Handy Video so thank you. It didnt work for me as I seems to have thick rubber washers but these comments did point out the idea of using PVC piping which has worked for me. Thanks again

@littlestworkshop 3 года назад

This worked for me but I would recommend sewing machine oil or similar thin oil as WD40 vanishes over time, it's not really a lubricant but a water displacer (WD), degreaser and general unsticker.

@microwavegommmm916 2 года назад

Great advice, and I learnt something new about WD-40 that I didn't know I needed

@HolyDrugLord 2 года назад

@@microwavegommmm916 instead use a can of some silicon lubricant

@kristiansokcevic4866 Год назад

IT WORKS! I ve used pig lard (literally) on a shaft and rings. Just moved it up and down few times and its done. Easy and simple

@sumgai7 Год назад

So: pig lard is a great industrial grease - it's been used in bearings in plenty of factories! (and leftover bacon grease makes a pretty good cutting lubricant for lathe/machining work!) AND: if you've got some leftover, it makes a terrific pastry/pie crust -- and today is pi day! :-) (Don't ask me how I know all this - but, yeah. Have actually used bacon grease on a machine lathe and it works great - maybe not *quite* as well as the exotic sulfur cutting fluids, or Re-Li-On - which according to the SDS has a chlorinated paraffin wax? - and is just plain magick for s/s, but anyway! - bacon grease and pork fat work pretty darn well as cutting/tapping greases for standard metals -- and make terrific pastries too! (It's like the classic Saturday Night Live product: Shimmer! (It's a dessert topping - it's a floor wax!) www.nbc.com/saturday-night-live/video/shimmer-floor-wax/n8625

@fabianleon2002 3 года назад

this hack fixed my problem, i was going to waste money getting a new piston , thank you

@mustymelonz3796 4 года назад

Worked great thanks for the tutorial!

@mr.q8ty965 3 года назад

Fixed. But one of the 2 washers was broken. Thank you so much 💐

@richarmed6684 3 года назад

mate the most under rated and overlooked fix to the dreaded drop and miss your shot issue, I'm pretty sure the wd40 is just a placebo and wizardry is really what is happening here !! but thanks all the same :)

@ajrockguitar 3 года назад

Great! It seemed to work. I don't know why because there was plenty of lube on it already, but somehow it works! Thanks!

@MrJasonvella 3 года назад

thanks working fine till now. Chair is only a few months old. Guess the seals dry up and air leaks that is why WD-40 works.

@themdg Год назад

Thanks for this vid! This is probably a lot like a motorcycle front shock. Dirt and tiny nicks on the cylinder cause the fork oil to leak. Usually cleaning and buffing that cyl. will restore the seal. I assume adding WD40 is about the same for these chairs...fix the seal. I bet a nice clean on that cylinder would help as well. I'll give it a shot!

@freddiemmc9251 2 года назад

Was about to cut a piece of PVC pipe until I saw this video. Worked like a treat. Thank you so much. That's why I love RU-vid

@NikonErik 2 года назад

I've watched several of these videos. This was the last one I saw. Okay . . . So I'm in the garage, I took the chair apart. I got the PVC pipe out, but I stopped and grabbed the WD-40. I figure, this is easy to take apart if it doesn't work, I've got the PVC. Holy smokes! This really works! Thanks!!

@tripios 4 года назад

for some physical reason it worked!! thank you

@juancgarcia3535 2 года назад

Many thanks for going straight to the point, not asking for likes and subscriptions. This is the way videos about fixing stuff should be done. Sadly it did not fix my chair.

@MrFunkyCabbage 2 года назад

You are an absolute Godsend.... I was getting the raving hump with this chair going down every 5 minutes... FINALLY BLISS!

@PaddyMcMe 3 года назад

Thank you so much, this appears to have worked for me!

@D2Kprime Год назад

I was skeptical that this was going to work, but it did. Thank you!

@lxworld 2 года назад

Worked a dream. Many thanks for the video and inspiration

@allancowley9928 3 года назад

Great fix. Don't know why or how it works, but it does.

@Dota-uu7ex 2 года назад

Thank you!! so easy to fix and its true, other video too complicated, but this only using wd40 and its fix my chair from slowly sinking..ty!!

@AngelOliva302 4 года назад

Thanks for the Video!! - It worked!

@shinichishan6466 3 года назад

thank you so much... back and knees pain no more😍

@dumitruseptimius5023 3 года назад

For some reason, it worked :) Fixed it! Thanks!

@MrPete20tong 10 месяцев назад

Thanks, quick, and simple to do.

@sj59 3 года назад

yesterday my IKEA office chair would sink slowly to the lowest point within a minute...today (so far this morning) it is holding! I don't mind doing this fix a couple times a year because it still allows for the adjustment of the chair height depending on who is using it. Thanks for this video tip!!

@HBPLUS 2 года назад

Pls HELP me! My chair was making noise and didn't have sinking problem so I sprayed wd40 everywhere. Now my chair started to sink but just 1-2 inch (3-5cm) it has been few days still didn't change.

@jesuslovesyoujohn314-21 7 дней назад

Thanks a lot, just what I needed to know how to fix the two chairs we have.

@jeremyjohn97 3 года назад

Thank you so much for this tip! It worked on my chair pretty well (for those who are in doubt). And it didn't take much time either.

@tmg1262 2 года назад

Fish oil works good but it dries out very easily

@James-jx3ro 2 года назад

@@tmg1262 then that means it doesn't work well...

@farouspopoola 8 месяцев назад

😢Can I use engine oil??

@kuyatv5452 3 года назад

Thank you very much, worked like charm!

@WellDiva 2 года назад

Yes, it worked. A thousand thanks!

@J.E.R.O.M.E. Год назад

This actually worked! First try, too. Make sure to go up and down on the chair for a few minutes to really get that WD-40 to activate, but yeah, this worked!

@lindasharp2585 3 года назад

Bloody Brilliant. Had this chair for years in front of my sewing machine and it went up and down like a yo yo. I did this, it took a couple of minutes and it now works perfectly

@johnasdoe3699 3 года назад

works perfectly? For one day?

@cr24sh 4 года назад

For some reason it worked :) Thanks!

@licensedtalentagency2488 3 года назад

Just fixed my chair. Thank you!

@wayneb8495 Год назад

It worked so good! Pow! 💣 Update - it started sinking again later. The pattern became: Fix, a week or two weeks ok, then back to sinking. However, becoming so familiar with the parts gave me an idea. 💡 I just cut a black 2 inch PVC pipe to size and replaced the post cover with that. Pow Pow! 💣💣

@2b_0r_n0t_2b 2 года назад

This actually worked! Thank you!

@adm7812 3 года назад

this worked for me although I used machine oil for better lubrication.

@adamyusoff9591 3 года назад

It actually worked, thanks mate!

@TheGodfather27192a 4 года назад

OMG! IT WORKED! THANKS

@tomtom53 4 года назад

Worked great thanks!!!!!!!!!!!!!

@BennySantana501 2 года назад

Thank you for this. You've saved me having to go and buy a new chair!

@GarryStock 2 года назад

Wow!!! Thanx. Worked perfect!!!

@dasunweerasinghe2378 4 года назад

Thanks Man this works. so far

@flowreen6256 3 года назад

Thank you for your help !!!!

@thicckok4526 2 года назад

Thank you so much, it really worked!

@Ralph_710 3 месяца назад

I used silicone oil and it worked! Thanks!

@sahalae6443 4 года назад

THANK U SO MUCH LIFE SAVER

@MarcinKubica 2 года назад

Thanks. I've happened to use bike grease with great result.

@wadeos2123 Год назад

Thanks this worked perfectly 💯

@bukojuice1925 2 года назад

Wd40 works great. Thanks for the tip.

@mahmoudasad3348 3 года назад

It works! Thank you

@faheemshifayee9020 8 месяцев назад

It really works for me, thank you so much

@lionelspencer-ward3527 3 года назад

Thanks for all the replacement cylinder links....just in case the WD40 doesn't work!

@PoshPaperPerfection 3 года назад

Thank you so much! Chair is fixed. Your video not only empowered me to learn more things to fix but also made my coworkers look at with me with awe...lol

@sinatra617 3 года назад

Wow im shocked that this worked. Thinking about it i was saying how is grease going to make it from sinking. It would just make it more slippery which in turn would create the chair to sink. I looked on amazon and was about to buy these 3 plastic clamps you put on the main bar but didn't like the fact they were plastic and was reading some of them were snapping in ppl. I decided to try this method and I am shocked that the WD40 worked. Great video dude!

@34286jc 2 года назад

i kind of don't understand how this works but it worked for me. thanks

@JRome42 3 года назад

Thanks it worked!

@SabariKrishnan-lm2ew Год назад

Great tip, coconut oil itself solved the issue in my case

@TheBrutalDeluxe 5 месяцев назад

Nice video, no faffing about, just straight to the point, though, I could have done with a separate video on how to fit the bit at the bottom when putting it back together :) . I did this about 5 hours ago and it has worked for me. Drops about half an inch when I sit down but I can't remember whether it did that anyway.

@TheBrutalDeluxe 4 месяца назад

Ok, 2 weeks later and the problem is back but not as often per day.

@sykottic6siccnss 4 года назад

Thanks

@MalcolmFlex1 Год назад

WORKS!! But I used "tri-flow" instead

@AnGeL27500 4 года назад

thnx, it worked

@chrisbodum3621 3 года назад

Thanks for making me take it apart though I was resigned to it being the hydraulic cylinder, but after I unclipped base, I pressed the handle and it magically worked ! It looks to be in good nick and fine and is holding up. Didn't need the WD40 at all (and no need for any tube or aluminium can inserts). Two of the pairs of wheels come off daily, so I have to replace those and I a piece of leather I bought 30 years ago will cover the seat and arm tears.

@ilumilite Год назад

fantastic! thank you.

@hairilahmad1477 3 года назад

THANK YOU.....

@jayyromero3557 3 года назад

omg you are super brilliantly amazing👏😊 Thanks bunches for your wisdom and for showing us how easy this was to do ourselves ... lets give a 👍for this chair fixing god👨🏽‍🔧👷‍♂️👨‍🎓 right here lol none of this was meant in any sarcastic tone lol u really are a god amongst us computer chair owners/users 💺😂

@annonymat Месяц назад

Excellent video! And honestly, it’s less work than other tutorials, that tell you to just fix it in place. BUT! You are using WD40. That’s a light oil that evaporates. For that kind of duty, I recommend using some sort of greece. I couldn’t find mine, so I went with body lotion. Use something thick. You can go the Boeing route and use dish soap, but your chair will crash and burn. But use greace😉

@Micha-ir1bv 6 месяцев назад

Thanks man for this video

@fredej007 3 года назад

Worked! Nice

@PixelShaun 3 года назад

just tried! hopefully it works

@cymphizumil6942 4 года назад

Tried everything exactly how you did it. Didnt work. At least it works for a quarter of a second when I sit on it but still falls.

@meowme7644 3 года назад

using heavier grease, and first disassemble all and clean the tube, rod and all components... how deep is your chair? look at the distance between the cylinder and the chair base from under it. if the cylinder is not even with the base and outstands more than 2 finger then you could put some piece of paper/aluminium foil between the housing and the cylinder... ??