Тёмный

Concours Carbs Again 

Gerard Pineau
Подписаться 6 тыс.
Просмотров 6 тыс.
50% 1

Clean the Carbs again. Colorado gas with ethanol can not be left to sit for long in a motorcycle carburetor. I let it sit for three weeks and it went from running poorly to not starting at all. I have had the carbs off this bike several time and it getting to be second nature. This is the first time I try to pull the carbs with he plastics still on the bike. Also adjusted the floats and show off my USB charger I installed. Nothing unique here that you haven't seen before but I wanted to show how I did it and explain where all those loose hoses go.

Опубликовано:

 

30 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 15   
@AdrianeWest18
@AdrianeWest18 10 месяцев назад
Thank you so much for the hose routing I’ve searched everywhere for weeks finally you have no idea how much I appreciate you man
@anonymouscommenter801
@anonymouscommenter801 3 года назад
I was Tarzan and didn't use a heat gun.
@chuniquepaceno470
@chuniquepaceno470 Год назад
I'm fortunate enough to have a couple of gas stations in the local area that sell ethanol-free gasoline, it's a bit more expensive but worth it. Thanks for the video, the more of them I watch, the easier the carb work gets.
@tombair1401
@tombair1401 2 месяца назад
So on these concours the Stock air Box is the killer of Power it dosent work wirh the motor went to pods .went up 10on Main jets 2 on pilot gained 15 horsepower
@michaelmilton8925
@michaelmilton8925 4 года назад
Those black tray's your small frozen dinners come in, make great organizers screws,floats,jets.
@YouTubeHarassmentTeam
@YouTubeHarassmentTeam 3 года назад
You just saved me a huge headache by pointing out the hose routings much appreciated
@michaelmilton8925
@michaelmilton8925 4 года назад
I like your closeup video. Go gerard.
@gerrypineau
@gerrypineau 4 года назад
I dont remove the carbs anymore. I changed to fuel injection.\ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-odRc84ogfQ4.html
@reaper-ox9hr
@reaper-ox9hr 2 года назад
So I definitely like this video… my only problem with it is that my carbs do not sit level in the bike…so in tuning them level they actually are out of whack..and leak into the exhaust and the airbox… definitely informative, but that was the only issue I had.
@strshooter7399
@strshooter7399 4 года назад
Gerard, this was a very informative video. I'm considering getting some overflow pipes installed by Shoodaben Engineering in the carb bowl where the drains are. If you're not familiar with them, check out his Web page, and you can see images of what the overflow pipes are, and how they work will be obivous. Once I get the carb bank out, and the bowl covers off and sent off to SBEngineering, I might put in new Carb Float valves just to be on the safe side. I don't want to risk a sticky Float valve, and even with overflow pipes installed, I can't think of a worst scenario then having your engine get a bent connecting rod from a HYDRO LOCK situation. I installed a wiring harnes for a GPS off the front aux. output leads, and pulled my tank. Thats when I found my Petcock leaking without vacuum on it. Ordered a new Petcock, and still waiting. I'm considering putting an additional inline OFF/ON valve just downstream of the Petcock, but I've been warned, it will cut down on gas flow, and could cause gas starvation. Just an additional piece of insurane so I never have a time where gas from the fuel tank can leak into the carbs, and have a float valve stuck open and boom, HYDRO LOCK. Good video, great information. Your sound was not so good, your coughing was SO LOUD, and the rustling of something was really loud... BUT the INFORMATION was GREAT. Thank you very much.
@gerrypineau
@gerrypineau 4 года назад
Thanks for your comment. I live in Colorado and it is difficult to find fuel without ethanol. This causes great pain every time i leave the bike a few weeks without riding it. I got really tired of pulling and cleaning carbs. I now have converted one of my connie's to fuel injection.
@gerrypineau
@gerrypineau 4 года назад
ru-vid.com/group/PL9ZAieLe6zon1TuzB_mU4w5h5qqh5WuXQ
@strshooter7399
@strshooter7399 4 года назад
@@gerrypineau I just really admire your never giving up on your connie! There is a gentleman in NH, Bob, should ah could a wouldda(not exact, sorry) youtube. Has connie and pulled it apart (and other MCs too) to fix this and that. He's fearless in fixing things. You both are Great examples of what can be accomplished when you have what it takes inside. I admire you both.
@GPz84
@GPz84 2 года назад
A little tc-w3 oil in the gas will stop ethonal from eating the rubber bits in the carb and petcock, especially during winter storage. The gas tank is probably the major cause of carb trouble. The sides of the tank where it meets the side panels sit below the petcock. Water collects in these areas, starts rusting the tank, the trouble begins. I had my tank lined with RedKote and installed an inline fuel filter. Get to the route of the problem, no more problem.
@michaelmilton8925
@michaelmilton8925 4 года назад
When's he gonna use stubby screwdriver?
Далее
Concours ZG1000 Cam and Valve
20:38
Просмотров 34 тыс.
Bearwolf - GODZILLA Пародия Beatrise
00:33
Просмотров 359 тыс.
Carbs leaking? Here is how to fix it.
10:42
Просмотров 687 тыс.
KAWASAKI GTR1000 CONCOURS
20:22
Просмотров 44 тыс.
Carb Installation Concours ZG1000
15:15
Просмотров 34 тыс.
Carburetor Float Height: Tips For Multiple Carbs
11:26
Просмотров 102 тыс.
ZG1000 Concours carbs- Reasonable Expectations
16:15
Let's Revive This Kawasaki Concours 1000
1:12:53
Просмотров 32 тыс.
Kawasaki KZ1100 - Carburetor Clean - KZ Carb Rebuild
19:00