There is one major mistake after clear moke poll vote switch off machine and then start sealing process. If you do not switch off if close button is pressed by mistake creat severe problem.
Kindly check there is some discrepancy while fixing green paper seal . Video at 4.00 showing green paper seal should be afixed in such a manner that its serial number should appear outward but at 4.40 the green strip seal is reversed and its serial number gets inward . Kindly correct this discrepancy.
Here the slno and the signatures of the Pro and polling agents should be seen clearly on green paper seal after dealing the control unit , so the green side of GPS should be in outward position but here you have shown it in inward direction.
how many votes stores in one evm machine at a time n is the vvpat and evm count physically counted in mok poll ? and why only 15 votes it should b atleast 1500 votes, programmatically it can b set after 15 votes it can b set for perticular number is it possible to shuffle the candidate position on each polling booth to get unbiased results think on it
What I got that there is a glitch say election commission authority can delete or erase the actual vote results and can freshly input new votes 🤔 Is that possible?
The mock poll, which is conducted before the actual poll is for checking if the EVM operates properly. The Control Unit is sealed before starting the poll, the seals need to be broken to erase the results.
after the polling is done, all the EVMs are stored in a strong room. The transportation of EVMs from polling station to strong rooms is strictly controlled and monitored. Polling agents (representatives of candidates) also monitor the movement of EVMs. The strong room is covered by CCTV from all angles and the monitor to view the videos of these CCTV is available in the vicinity of the strong room. Anyone can see the monitors and CCTV feeds. The EVMs are store in the strong room till the day of counting of votes. During the entire process, all the public/ candidates/ agents have full knowledge of where the EMVs are and who al have entered the strong room. There is no scope of tampering with the EMVs.
secret ballot manual voting is preferable . Because in manual voting nobody knows whom ur voting But here VVpat knows to whom ur voting-and VVPAT can be tamperedwith .Though election officer responds to voters complaint he can not prove that the previous vote already polled was not tampered.
Ec did a good job.Anyhow I would like to appeal in front of people of karnataka go and caste your vote for a better society and tomorrow by choosing better candidate without having caste, creed, clan, sion and religion.We are the backbone of our nation.Gm.
chk this video 3.20 min onward. i think green paper seal has been put incorrectly. green portion mus be on top & visible to facilitate reading the number printed on it. if i am right, it's a blunder shown on video . how can u teach in wrong way.
You are absolutely right Mr. Subas. The number of Green paper seal must be on top and visible. Another example of Sarkari lethargy where babus die to maintain the status quo.
@@Tehseennsr after mock poll you have to ensure that you pressed CRC keys (close, result and clear) and switch off the machine. You have to seal it before starting actual poll. You must begin mock poll at 6 am if polling agents are present or by 6:15 if they don't turn up.
EVM मशीन की चिठ्ठीया गिन नहीं सकते..... तो कम से कम उसकी एक कॉपी वोटर को क्यु नहीं दे देते.....? इसका मतलब सच में राजा की जान तोते में हैं l यही इस देश का दुर्भाग्य है ....l
Before sealing the CU, you need to vote for each candidate including NOTA an almost equal number of times until the total amount of votes polled is at least 50. Then the results need to be viewed and cleared.
