Conduit Climbing Frame Build. 

OUTBACK DOMES I believe u!

Hydraulic press certainly helps strength

I notice he (Paul Robinson geo-etc.) gives me, GIVES ME FREE! all the clues of his brief in-depth conversation “ here. Eye-bolts for the floor, parachute cover, all evidence for my slow mind. But (Paul and)RU-vid lets me review over and over again

What dome kit did you purchase? Ive made a magidome recently and looking to expand my skills into conduit/metal domes to get to airbnb level dimensions

I want one so bad!

Looks like a parachute at the end. And the calculator can be found at: www.desertdomes.com/domecalc.html

It's a climbing frame!

That’s so cool 😬

3/4 inch or bigger for climbing depending on the strut size. The conduit looks like it is 1 inch in the video.

There are several great geodesic dome calculators online.

Yes, please Paul can you post the strut length and bending angle? And thank you for all your videos, I am presently constructing an underground Hobbit House 10 ft by 20 ft 7ft deep. There will be steps in the back leading up to my ground level bedroom. Covered by your dome! Sleeping under the stars. Thanks to you.😉 I will gladly send you photos of the work in progress to finish. The mini excavater is reserved for next Wensday!! bUT i WOULD LOVE TO USE THIS FRAME, JUST NEED DIMENSIONS. tO BE PERFECTLY HONEST WITH YOU i AM A DISABLED VETERAN, BECAUSE OF SEVERE HEAD INJURY I HAVE TROUBLE CALCULATING THE MATH. But my construction and following instructions are excent. Please I will appreciate any aid you or your members could give me. Thank you again Paul. You are my new hero.👐

I've heard that the air inside the car is often worse than the air that would be coming in from outside.

@@shaun6828 Probably due to new plastic off gassing in the sun. I don;t really like the smell of new cars. That's one of the reasons i like driving and maintaining older vehicles. I mean, most of them are close to the year 2000 + - a few years. I do have a 73 RV in USA which is a bit old to be efficient, but pollution wise for the amount of use it gets it's almost irrelevant by comparison of people who drive daily. Not much off gassing going on in that one!

Yes if you where doing a lot that would be the best solution, I might look at something because this is quite an easy way to build lots of things.

There are plenty of examples of houses just search you tube "doom houses"

@@MrIlangovans , better results to search a "dome house". ;)

ADMA LOL

Unfortunate that non-standard construction is not allowed or too expensive in many places. It is hard to meet building codes designed for conventional buildings.

lifting eye

Hey that's a cool idea, did you pursue it?

Very labour intensive? :D I would like to see your version of hard work :D

MasterMindmar

It's galvanized electrical conduit. ⅝ or ¾.

How did you cut the pipe? Pipe cutter I'm guessing

It's in your head...any length you want :)

In geometry text book

Larger tubing is always stronger, the length of the struts would be one of the biggest factors in deciding tubing diameter.

@@edgarpryor3233 is there a formula?

@@AliAbdullah-oi3wc I'm sure there is, but I don't know what it is.

It's 25mm electrical conduit, wall thickness is 1.6mm I think, better go to a electrical trade store, I think they would be cheaper than Amazon.

glue. but you would have to get the triangles cut, It would be possible to make this out of a flat or angled material with a bit of thought you could find a different way to attach glass. you could just make glass triangles with holes in the corners and then bolt them all together, might work with toughened glass but v expensive! or with perspex

some sort of mastic type glue, the really sticky shit.

Yes, correct

Aller Plus Haut by BertySolo

25mm OD 1.6mm wall thickness.

@@Geo-Dome Thank you dear Paul!

Hii just recently bought your gd15 dome plans book I would like to buy more of your dome plans can you tell me what is the best way to contact you I've tried through the geo-dome website with no response by email thanks love your work

RU-vid search the youtube channel: zip tie domes they have all the information you need

Master " it"? Is "it" the project itself in this video ?' I hope so because I've seen many rabbit holes Paul has fallen into and made his way out of while designing and building what seemed to be easy to master dome projects. I've been watching him for years now and I keep coming back in the hope of witnessing another moment self actualization gained each time he surrenders to the will of the dome god placing his own will to the side.