Configuring the shaper for cope cuts

Подписаться 486

Просмотров 6 тыс.

50% 1

In this video, i take you through the steps to configure the shaper to achieve the end grain cope cuts. This video illustrates the setup on our Martin T12 shaper, but the concepts can be used on any machine with any "sled."
Thanks for watching, and please post a comment if you have any questions.

Хобби

Опубликовано:

21 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 10

@RVgeeks 4 года назад

Another super video. There's nothing better than watching a new channel do so much right, right out of the box. 👍

@vincentrolfe1384 3 года назад

I have the older CNC Felder Profil 45 Format 4 shaper with sliding table and 30MM spindle. With the Felder hold down clamps and using the Aigner fence along with or without the Felder block; we achieve the same you have here for cope and stick cuts. We clamp the wood in a perfect 90 degree position on the out rigger and begin the cut with Felder rail and style tooling or make muntins using the optional Felder high speed spindle and a custom router bit to match the Felder tooling in making muntin profiles. With the CNC fence we are able to adapt to a variety of muntin widths required to join muntin to rail and style. This setup with Felder shaper probably costs approximately $25-27K less than your Martin with sled and Italian tooling. We use the same Felder X-Roll out rigger with Felder round corner tooling and Aigner fence to round over corners of replica antique 150 year old UK design air rifle boxes. For end grain cutting the Felder has a custom spoil block on the out rigger fence to eliminate tear out. Felder Senior was quite a clever guy in his day.

@curlandburl6937 2 года назад

i'm glad you're happy with your felder setup. i know many great woodworkers who do terrific work with felder equipment. i looked at the felder shapers very carefully.... before buying the Martin.

@jar944 2 года назад

Ignoring the Martin and macs clamps, how are you coping into the profile without a backer?

@curlandburl6937 2 года назад

i guess i don't understand the question. i'm doing the cope cuts first, and there's almost no tearout with the zuani cutters, especially on relatively soft woods. then i run the profile cuts, removing that entire edge. any tearout that is there is then gone.

@jar944 2 года назад

@@curlandburl6937 15 seconds into the video you are coping a already profiled rail. I'm guessing from you response that is not your acual process.

@curlandburl6937 2 года назад

@@jar944 this video is really showing setup - my process is illustrated in the other video. no idea what i was doing here, probably just running a test cut to check the vertical alignment.

@jar944 2 года назад

@@curlandburl6937 I was hoping you somehow solved the tearout issue with coping after sticking with a single cope head and no profiled backer...lol. Would have saved me from buying clockwise and counter clockwise cope sets.