Configuring The TCA Officer Pack for General Aviation | Microsoft Flight Simulator Tutorial 

The way it works is it’s a sequence of presses, let’s say we have Button 1, and Button 2. I’d assign one function to button 2, and then another function to Button 1+Button 2. So when I wanted the second function assigned to Button 2, I’d press button 1 first, followed by button 2. Since I recorded this, I’ve kinda gone the opposite way and don’t really use button mappings for much other than the main control surfaces, and just interact with the cockpit via the mouse. I realize on Xbox that assigning more functions can be very useful though. Anyway, hope that helps!

The left and right boxes are there if you want to assign the same function to two different keys. To achieve the combo press, you press on the first key, hold it down, then press the second key.

@@FlightSimSchool Thank you so much

There are two different axis that you can try, one of them says something like mixture 0-100, and the other just says mixture axis. I believe I used the 0-100

Hi Derek, I still use this setup today with a few minor tweaks to how I use the buttons, i found after a while that it was easier to just look around the cockpit to find what I’m looking for rather than overloading the buttons with dual functions.

@@FlightSimSchool Okay, thank you sir!

I'm using default sensitivities for almost every plane that I fly.

@@FlightSimSchool thanks

It’s a combo press, so the button is used to reset the view and if I hit another button plus that same button it’ll do a different function

I forgot to mention that I use it in the first-officer configuration, so right hand on stick, making it easy to reach the trim with my left hand. You'd want to flip it for captain/left hand usage.

I don’t have xplane, but I don’t see why it wouldn’t

I mapped the external look left and look right to keys on my controller so that I can look around easily.

The first thing I would check is if something got accidently assigned to one of the bindings, and try it with the default bindings that come with the controller

hey hopefully you already figured this out but in case you didn't, that happened because the conflict with the engine on/off switch. go to your settings and only assign engine master switch 1 for button 3 (left switch) and engine master switch 2 for button 4 (right switch) then you should be good.

Sadly not :(

there is new edition that support xbox, just released