Hi, no, one camera does not work without power.But the feed can come via a separate wire or via internet cable (POE). This camera is capable of POE only after internal wire conversion. Have a nice day!
I have model c-p11 122 all work in past but now. I.change router and nobody can recognize on install. I.reset I use 2.4wifi and no hear dudu sound install
Hi, try this: 1. Is your ip address public or private? You have to be public! Test: use whatismyip and compare whether the wan ip in your router and the ip address on the website match? If they match, everything is fine. 2. Press the camera reset button for more than 10 seconds. You should hear a "successfully reset" tone. Wait for the camera to boot completely. (soft click click from the camera body, ir filter ready) 3. Connect the camera to the router wired. 4. Connect your phone to the wifi network. 5. Start the YOOSEE application and select the wired connection method. 7. Follow the instructions, then after connecting, set up the wifi network information as well. Have a nice day!
@@Fenyutas I learned from your instruction #1 that IP addresses must match, which prompted me to turn OFF my /VPN temporarily to get camera connected. Thank you for that implicit direction to make sure IP addresses match! God bless you and yours.
