Тёмный

Connecting the Televes Indoor Distribution Amplifiers 

Solid Signal
Подписаться 10 тыс.
Просмотров 65 тыс.
50% 1

Solid Signal's antenna tech shows you the proper way to install Televes' new distribution amplifiers. These innovative amps let you control up to 5 TVs without overdriving the closest one. Watch the video, then shop for Televes amps: www.solidsignal.com/televes-t...

Наука

Опубликовано:

 

21 фев 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 34   
@JPU89
@JPU89 7 лет назад
Thanks for the video? Have you'll done any reviews or recommend any certain OTA Antenna DVR's? Thanks!
@JPU89
@JPU89 7 лет назад
Also is there a system that would be kinda like the genie where you can have a DVR in the living room with receivers in like 3 bed rooms on the same coax network. And be able to view recordings in all rooms.
@SolidSignalNovi
@SolidSignalNovi 7 лет назад
We recommend the Tablo for streaming to a mobile device, and for a standalone to a TV... there are not any really stellar solutions unless you want to pay a lot.
@SolidSignalNovi
@SolidSignalNovi 7 лет назад
TiVo has a system like that.
@stefanosantonios2571
@stefanosantonios2571 2 года назад
Hello from Montreal. Please start delivering to Canada.
@mrjcbuc
@mrjcbuc Год назад
So, to use this in conjunction with a Tablo, which will wirelessly connect three tvs, do I plug the antenna coax into this and then use another piece of coax out to the Tablo?
@SolidSignalNovi
@SolidSignalNovi Год назад
Yes, exactly
@boobletownbobby9255
@boobletownbobby9255 Год назад
I just purchased a Televes Ellipse Mix from your site. I know that it already has build in amplification and ports for two TV's. I will be hooking up 4 TV's so obviously I need a larger splitter. But do I need this splitter which is amplified or a regular balanced type splitter since the antenna already has amplification? Am I using both outputs on the antenna or terminating one of them and having the splitter after that? I haven't heard anyone clarify this.....thanks!
@SolidSignalNovi
@SolidSignalNovi Год назад
It depends how much cable you’re running. If you have less than about 75 feet from the furthest tv to the antenna, you’re probably good. If you are having reception problems at the furthest TV, add this distribution amplifier.
@mundomakina1980
@mundomakina1980 Год назад
Very good and exceptional Explication,Thank you very much....saludos....Mundomakina
@simonsolomon2055
@simonsolomon2055 5 лет назад
how much is the price please
@juanchomedina7765
@juanchomedina7765 2 года назад
Me interesa el producto,como lo puedo obtener
@blueplasma5589
@blueplasma5589 2 года назад
one of your terminator caps has a bent center pin....
@richardbarkley9909
@richardbarkley9909 Год назад
WE recently bought the newest Dat Boss LR #149884 Televes antenna. I read a lot of reviews on it and it was recommended to us by an antenna expert. This said, There was 1 reviewer said that THIS Televes amp was NOT weatherproof to be able to be mounted outside-(IMHO thats where "most" homes inlet from the antenna is going to a splitter and in turn going to the separate cable lines that go into the home's multiple TV outlets) (OURS is this way) I have no easy way to get 120volt current TO the plug on the amp outside and asked my antenna pro what I could do. He advised me to get a special splitter to use INSIDE my home along with the Televes amp. I have ordered this special splitter and we plan on installing the system this weekend. Thoughts?
@SolidSignalNovi
@SolidSignalNovi Год назад
With the DATBOSS LR, you get something that looks like the item in the picture. It's the power supply for the built-in amplifier. It's confusing that Televes uses the same chassis for both things, but they are different. With the antenna you bought, the amplifier is built into the antenna and the power supply, the thing in the white case, is intended to be used inside. You do not need to put that part outside. Use coax cable with a solid copper center conductor to connect the two so there is minimal power loss. Again you do not need to put that part outside, it is not intended for it.
@SolidSignalNovi
@SolidSignalNovi 8 месяцев назад
I think whoever said that is confused. The amplifier is built into the antenna. A lot of people think the white plastic box that plugs into the wall is the amplifier. It isn't. All it does is power the amplifier. It can be 50-75 feet from the antenna and still work, from inside. I'm not sure which special splitter you're talking about, but you should be able to connect the white plastic box inside, run RG6 with a solid copper center conductor to the antenna, and it should work.
@marshallramirez3068
@marshallramirez3068 Год назад
I have 2 tvs I want to connect do I still need this amplifier or can I just use a normal two-way splitter instead?
@SolidSignalNovi
@SolidSignalNovi Год назад
It depends on your installation. If you have under about 35 feet between TVs you may be able to use just a splitter. Every install is different.
@marshallramirez3068
@marshallramirez3068 Год назад
@@SolidSignalNovi Well I just got my over the air TiVo edge and I was going to use those to run my OTA off of
@josepht3396
@josepht3396 4 года назад
I have this antenna connected to an AirTv2. Is the amplifier necessary?
@SolidSignalNovi
@SolidSignalNovi 4 года назад
Every installation is going to be different. You might need it or you might not.
@josepht3396
@josepht3396 4 года назад
@@SolidSignalNovi for example I am pretty far from the broadcast towers i.e. 55 miles. What are the advantages of amplication ? More power to antenna?
@SolidSignalNovi
@SolidSignalNovi 4 года назад
@@josepht3396 This amplifier is designed to deal with long runs from the antenna to the TVs, or multiple TVs from a smaller antenna. I think you should leave it in.
@telosfd
@telosfd Год назад
Can i connect SAT antenna or radio band freq.?
@SolidSignalNovi
@SolidSignalNovi Год назад
It's not designed for satellite frequncies. It would probably work for FM but not AM.
@denverferrell5217
@denverferrell5217 8 месяцев назад
So there is no pre Amp on the pole?
@SolidSignalNovi
@SolidSignalNovi 8 месяцев назад
We do have pole mounted preamps at Solid Signal. This is a distribution amplifier intended for use inside.
@billspeight8936
@billspeight8936 8 месяцев назад
I'm insalling my antenna on the roof. Can i insall the amplifier in the basement then split to two tvs. The run from the antenna to the basement will be about 40' Thanks
@SolidSignalNovi
@SolidSignalNovi 8 месяцев назад
Yes that should work.
@billspeight8936
@billspeight8936 8 месяцев назад
Thank you
@Nota.cyclist
@Nota.cyclist 22 дня назад
Does a shorter vs longer run from the antenna to this amplifier impact signal strength or is the total distance more important? I’m not sure if it’s better to locate this preamp in the attic closest to my rooftop antenna vs a longer run closer to my tv and modem locations.
@WV591
@WV591 2 года назад
why only two TVs getting amplification with three outputs? only 6Db per out
@SolidSignalNovi
@SolidSignalNovi 2 года назад
The amp is intended to be used near a TV, so that output has no amplification. The other two would go to other rooms so they get amplification.
@pamusmuhindo6736
@pamusmuhindo6736 2 года назад
Aide nous aussi avec un tutoriel à français svp please
Далее
HANDS ON REVIEW: Televes SmartKom amplifier
10:17
Просмотров 10 тыс.
How To Fit A MASTHEAD AMPLIFIER & Power Supply Unit
11:28
Amplificador de mástil y fuente de alimentación
7:53
Televes T-Force Dual Input Antenna Preamp Review
8:41
How Do Yagi Antennas Work
3:02
Просмотров 780
Size Does Matter...Televes DATBOSS Installation
10:27
How to install the Televes DigiNova Boss antenna
3:01