Hey my friend, great content, I have set parameters on my motor, in using a 18.5 kw tec motor, I’m confused on the part where you enable the the drive? With the blue wires
Hello Fellow colleagues. If you enjoy the video please click that like button and if you did not, dislike it and let us know in comments, what was, that made you not happy with the content, so I can learn from it and make better videos for you in the future. Have a great day everyone.
Sorry I have little knowledge on these things but What sort of wiring do I need for the drive enable? Is the a certain requirement? Any help would be appreciated
Hello, I've been set few parameter however it cant be saved and change to default value when I turn the vfd off. Do yo know how to solve it? Any help will be apreciated.thank you.
I have an error Er.01.AC. how can i solve this and what is that mean? I'm trying to start a motor with specifications:2.2 kw, 165v, 12.5 A, 17000 rpm. Help please
Sorry I have solved my issue, but I need to run the motor in reverse I did a steps above but 24v into port 13 and did the auto tune, but it’s still not in reverse, any advice?
If you have a drive from the new, everything should be as the diagrams suggest. Remember inputs can be reconfigured, so if that has been done and not by you, then the best would be to default the drive and check then.
@@thuitamaina5488when I load my induction motor which is being controlled by the c200, I keep getting phase loss, wirings all good, 3phase is good, not sure why it keeps cutting off, any advice?
I have an older Control Techniques SE 2D200150 SE2.5M/TL 1.5 KW. The readout shows Fr-60.0 but no output. Would this indicate a configuration or wiring problem or a failure? I got this with an equipment purchase. and do not know if it works. Thanks -JD
All brake parameters start form parameter 46 page 49 in control user guide. To get more explanation what each parameter mean, refer to Parameter Reference Guide on Control Techniques website, link provided in description. I don't know your application so i wont be able to help much anymore, but all the info you need will be in manuals in parameters I have mentioned.
It means jigh amperage, you need to assure thta your motor is in good condition, neasure the insulation of the motor and the cable and see if the motor is not grounding, before operate again in the case it will show ypu the alarm again
You should be able to do that by resetting the drive, if that don't work then the only thing i would think is left is to connect it to laptop and do it vi there software.