CONVERTING MY CAR'S POWER OUTLET TO TURN ON WITH KEY

Подписаться 24 тыс.

Просмотров 9 тыс.

50% 1

The Daily Shed #802 - My Ford Focus power outlets are always on. This works fine for a phone charger, but when you want to add something with more features like an MP3 player or hands-free kit, these things can quickly drain the battery. I show you how to use a fuse tap to convert your always-on outlet to only power on when the key is on.
Things I used in this video:
T-11 Bluetooth/MP3 Player: amzn.to/2LIZPuc
Fuse Tap: amzn.to/2HiCN97
Multi-Meter: amzn.to/2W54TwW
Spade Terminal: amzn.to/2VDcHXe
Let's discuss in the comments!
LEAVE A VOICE MESSAGE:
304.602.7433
ETSY SHOP:
etsy.com/shop/...
SUPPORT THE SHOW:
Tip Jar - paypal.me/chev...
Amazon Wishlist - a.co/7TbxXlw
SWEET MERCHANDISE:
thedailyshed.co...
ON THE WEB:
thedailyshed.com
/ thedailyshed
twitter: @cheveedodd
instagram: cheveedodd
MAILING ADDRESS:
Chevee Dodd
PO BOX 8023
FAIRMONT, WV 26555
MUSIC:
the Preteen Industrial Complex
SOUND EFFECTS:
BlinkFarm: / blinkfarm
MY GEAR:
thedailyshed.co...
ABOUT:
Hello friends! Welcome to my shed. The Daily Shed is a daily (Mon-Fri) talk show and vlog that I produce in my shed. Each day, I pick a topic to discuss, and spend about 10 minutes on the subject. Then we talk about it in the comments! Thanks for checking out the show! - Chevee

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@gsphx602 Месяц назад

Great video sir! The most straight forward video I’ve seen. My 00 sierra has same feature both auxiliary and cigarette sockets always hot. Possible to link both on same tap in fuse link?

@CheveeDodd Месяц назад

They might be on the same circuit, in which case yes, that would be possible. Otherwise you'd need one for each.

@craftsman673 5 лет назад

I'm trying to do the same thing on my 05 Suburban. This seems to be the best way I've seen so far. Thanks!... Cool shirt

@CheveeDodd 5 лет назад

Thanks for watching!

@robbieherold3183 3 месяца назад

What did you add to the end of the fuse splitter to plug it in directly to where the cigarette adapter circuit goes? I know you show it in the video but it isn't clear to me what you did.

@CheveeDodd 3 месяца назад

It's a female spade connector and some heat shrink to electrically isolate it. Something like this amzn.to/467rSJo but I'm not positive that's the right size. You can find assortments of them in cheap kits.

@acidburn9 4 года назад

Brilliant video mate. This is the only video I found to do the wire tap for key off turn off.

@CheveeDodd 4 года назад

Glad it helped!

@acidburn9 4 года назад

@@CheveeDodd Just found out that I need a male spade terminal to supply power to my cigerette fuse that I removed. How do I know which fuse port hole (in cig . fuse) the spade terminal should go into? Should i feed it into the fuse insert which reads 12v on the multimeter?

@CheveeDodd 4 года назад

Yes, you want to go on the power side

@-Dwight-Schrute 4 года назад

Thanks for the video. I'm a fellow WV too, from Princeton. Keep up the good work.

@CheveeDodd 4 года назад

Cool. I haven't visted Princeton in... man. It's been years. Not a lot of reasons to go that far south.

@smoceskreen 4 года назад

Thx very useful! Now my transmitter will turn off with key and I don't have to rip it off every night 😆 Oh 97 BMW E38.

@talk2ashutosh1 3 года назад

Great video, i had been searching for this past 2 days :). Just one question, is there a way i can cover the hot wire. Dont want it left open and cause a short circuit someday. Some kind of summy female fuse?

@CheveeDodd 3 года назад

You could wrap another female spade connector in shrink tubing and put it over the open spade.

@jonathanhowe42 5 лет назад

Impressive car mod! I'm just glad I can change the bulbs myself :) . Although I will have to do some "modding" of my brake lights soon. Evidently I messed up when swapping them & didn't lock it in place, so the bulb was resting against the opening & deformed the plastic so that I had to break the bulb to pull it out - and of course I can't put another in b/c it won't fit. I'm thinking dremel, but maybe I should consider a heat gun to re-form somehow? Any ideas?

@CheveeDodd 5 лет назад

Well, without seeing it, I'd say that either of your ideas would work. If the bulb melted it, it's a thermo-form plastic and you could use a soldering iron or wood burner.

@jonathanhowe42 5 лет назад

@@CheveeDodd Ok, cool - I'll start with heat & see how that goes before removing material. Will report back when I've had time to play w/ it

@BRsWorld Год назад

You would have been better off running that tap to a relay and then wiring the relay into your cigarette lighter circuit. Because now you're pulling power for two things off of a single tap which it wasn't designed for. If you use a relay you're just using the power from the tap to turn the relay on which takes very little power. Also if you are looking for a good power only when the car is on connection I recommend the one for your radio. The radio uses a good amount of power so it's usually a robust circuit and can easily handle a little extra juice.

@Sarmientol87 3 года назад

I have a 2013 mustang and the only fuse that turns on an off is a 15amp that’s labeled power train control module. Can I use a fuse tap with 2) 15amp connected and tap into that power train module slot?

@CheveeDodd 3 года назад

Sure. That is your engine computer. Should something go wrong with the tap, you will lose power to your engine. You need to determine if that's okay with you. Keep in mind, the fused circuit means that there would have to be some pretty unique situation for that fuse tap to fail, so the likeliness of there being an issue is minimal.

@brandonrodgers6767 3 года назад

i got around this by buying extra outlet spaces that have on and off switches so i can leave it plugged in but switch it on and off with buttons on the side. i would have loved it this way but I was to scared of the risk.

@iRPGxLegend 3 года назад

Can you tell me the name of the outlets,? Also after 9 months how do they hold up?

@davidwakim8281 3 года назад

Awesome, however i dont have the same fuse type, i have a regular small fuse so i have no idea how to connect it to only one side. Can you help me?

@CheveeDodd 3 года назад

I'm not sure if they make fuze taps for those.

@madmike214 3 года назад

I would note that referring to a wiring diagram for your vehicle make and model is mandatory to verify nothing else is powered on by that circuit. If it's only the power points I see no issue with this mod.

@Treedogg7861 4 года назад

So what did you choose to tap into? And is there any fire risk?

@CheveeDodd 4 года назад

I went with the ignition, and only if you tried to pull more amps than the tap is rated for.

@cjwelcome6104 4 года назад

This was the exact video i was looking for as i just got a 2012 ford focus so I'm very glad you happen to also be doing this with a focus in the video :) quick question i would ask is what function is being risked that you selected and what do you mean by that? are you no longer able to use the other fuses particular task in the car anymore or does it just risk getting blown out along with the power outlet?

@CheveeDodd 4 года назад

I went with the starter. In theory, these jumpers insert a new, separate circuit, in the system... but, this little $10 splitter is doing that work. If it fails, and the two circuits get shorted to each other, then you loose whatever circuit you chose to interrupt.

@cjwelcome6104 4 года назад

@@CheveeDodd Gotcha ill be looking over my fuse box chart in the manual to choose which one is not that important but i first also need to test which one is only on when the car is on which is what i want to do to my 2012 ford focus for my fm transmitter to not be on all the time. Is there recommended method for re-plugging the wire into the location of the socket i removed my cigar lighter fuse from or just use like a single prong off an old fuse to plug into the negative terminal of my cigar lighter fuse location?

@CheveeDodd 4 года назад

@@cjwelcome6104 the fuse tap should do that for you.

@cjwelcome6104 4 года назад

@@CheveeDodd okay awesome and thank you again for your great video its really helpful! I found that some of my interior indicator lights and radio fuse is one that is key live so thankfully i can use its socket for this project and im currently cutting in half a blown fuse i had laying around to act as the socket plug for the negative terminal on my cigar lighter fuse port so now ill have it turn on only when the car is turned on. :)

@MyGuxim 4 года назад

Hello CHevee what i need is just the opposite of what you doing. I want the Outlet plug to work when the ignition key is not on. ? Can you make a video for that ?

@CheveeDodd 4 года назад

Hmm. What year/make of vehicle?

@massesbulet 4 года назад

Can those fuse tap hold up to 20A

@CheveeDodd 4 года назад

The one I chose said yes, but I'd be concerned if both circuits are pulling 20 continuous amps each. That would likely damage wiring or the fuse block

@ProAudioLLC 4 года назад

Trying to do it on a 2008 Mercury Sable, the accessory power is on mini fuses. Since they slide down into tiny gaps, there is nothing to slide the lead wire onto for the original mini fuse location :( Maybe if I break apart one of the pins off a mini fuse and solder that to the end of the lead wire and use pliers to shove it into the slot....?