COOLANT TEMPREATURE SENSOR REPLACEMENT (VW)

Подписаться 3,6 тыс.

Просмотров 221 тыс.

50% 1

STEP BY STEP instructions on how to replace a coolant temperature sensor, this particular vehicle is a VW golf mk5 but it is the same procedure for other vehicles fitted with this type of sensor, vw, Audi, Skoda, seat.
Fault, Fans constantly running when car is cold (Not up to temperature). if the sensors do not cure the issue you might have a wiring issue, this vehicle did. see other video on how to check wiring
Thanks for watching, if you are new to the channel please consider subscribing, like the video, also share with your friends and family. All our content is family friendly. We are trying to grow the channel and we need your help! Any ideas for future videos or want to get involved with a car feature DM on Instagram, our goal is simple, keep the youths active and give them experience and opportunities to try out new things. Life skills / yk.recreation
SUBSCRIBE HERE / ykrecreation
Follow us on our socials to keep UpToDate and watch some of our behind the scenes as we make the videos on the stories
• Instagram - / yk.recreation
• Facebook page / ykrecreation
Stickers also available on request - YK RECREATION RU-vid logo - support the channel paypal.me/YKRECREATION :)
Disclaimer- no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not YK RECREATION, Due to factors beyond the control of YK RECREATION, I cannot guarantee against improper use or unauthorized modifications of this information. YK RECREATION assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. YK RECREATION recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of YK RECREATION.
#coolanttempreaturesensor #fansalwayson

Авто/Мото

Опубликовано:

13 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 151

@aakifshah843 2 года назад

Amazing work explained in detail step-by-step keep it up well done yk recreation! Never fails to disappoint

@YKRECREATION 2 года назад

Thanks bro 💯

@rubbrg1134 Месяц назад

Filming and replacing , you should have double reward. Thanks alot

@YKRECREATION Месяц назад

Your welcome ✌🏼🙂

@seckam1990 11 месяцев назад

You saved me alot of time, money and hassle. Keep up the videos 🙏

@YKRECREATION 11 месяцев назад

Glad I could help, what car did you fix

@bashimanemichael2899 11 месяцев назад

What could be the problem my fans blows both of thm n my ref on 1000RPM

@ebrahimumarji6823 3 года назад

Well demonstrated and explained. Thank you

@YKRECREATION 3 года назад

Thanks for the support bro, glad the video was beneficial

@boostinn2162 3 года назад

Thank you for your videos they help us all alot. Keep it up 👌👌👌

@YKRECREATION 3 года назад

Your welcome, glad you could benefit from it

@MrJohnEco 10 месяцев назад

You should always use a new o-ring, especially if there is one included in the package you buy. The o-ring should not be placed loosely in the pipe as in the film, but should be placed on the sensor before installation. The fact that the old o-ring is larger is because it swelled.

@YKRECREATION 10 месяцев назад

the new o ring was a fake copy, had this before where they have made the wrong size, was too loose and water leaked out, i didn't get this on video and the original was a better fit. on my latest camshaft replacement video same thing happened, bloody new camshaft seal started leaking after fitting all back together, they sent a cheap copy that just didnt hold oil back at all so we used the old one as we did not have a choice 1000 miles later its still holding up, and the old o ring for the water pipe sensor has done over 10k and no leaks, this is the problem sometimes with ebay parts

@sacundai5371 Год назад

Awesome video..! Seat Leon replacement a pain..

@YKRECREATION Год назад

thank you

@cvx-6362 Год назад

Thanks alot i was looking for the other one for about 30 mins and then i found this video

@YKRECREATION 11 месяцев назад

glad the video helped, did you manage to fix the fault

@johnmcgillycuddy5696 Год назад

fair play to you ,,, i couldent find the seckond sencer ,, thanks ,,,

@YKRECREATION Год назад

After changing both my fans were still on unfortunately, after further investigation the wires had a break, this is also common on the mk5, see my other video

@pedrolara1169 9 месяцев назад

Thank you so much

@YKRECREATION 9 месяцев назад

You're most welcome

@tasbi5704 3 года назад

Keep it up lol your doing 😊😊😊

@YKRECREATION 3 года назад

🙂👍🏼

@FredDonnelhuman Год назад

hey mate does this throw a code for specific sensor of the two? or is it same code for both do you know by chance? im showing code p0116 ect sensor 1 on my cjaa 2.0tdi so thinking its just the first one but i might order both just in case

@YKRECREATION Год назад

I'd replace both mate whilst they work in conjunction, plus they are cheap enough and will save you having to bleed the system twice

@abdulrahimmujahid4227 3 года назад

👍👍👍👍👍👍

@YKRECREATION 3 года назад

Thanks 😊

@jujitsusti7719 Год назад

Great vid 💯👊 can you give me link for the sensor to buy get them from pls was they genuine or like from Gsf car parts ? Thanks

@YKRECREATION Год назад

I'd get them from gsf or euro car parts, if your from bradford I use JNS car parts in bd7 they have lots of stock also, best to give them your reg so they know what one is for your car! Glad the video helped, if your codes don't clear like mine then you need to check your wiring 😐

@kasper52173 3 года назад

👍🏾

@YKRECREATION 3 года назад

💯

@neacaisa5486 8 месяцев назад

Nice video, mate. One quiestion, I read somewhere that one sensor is a 4-Pole and the other one is a 2-Pole sensor. Do you know which one is?

@YKRECREATION 8 месяцев назад

on the golf they are both 2 pin, what car do you own ?

@Shera_S3EYG 5 месяцев назад

Green one on engine block 4pin grey is 2 pin on radiator outlet

@Seanwyndham 20 дней назад

My vw scirocco has problems starting when it is hot, can take a lot of tries to go. Starts first time when the cars cold. Could these sensors being failty be the issue? Thanks!

@YKRECREATION 20 дней назад

Sounds like camshaft sensor not this

@ajfessey_landpirate8014 Год назад

Brilliant mate. Just one question, are both the sensors the same part number?

@YKRECREATION Год назад

From what I know, they look exactly the same and do the same job so I presume they are the same

@ajfessey_landpirate8014 Год назад

@YK RECREATION Nice 1. Just ordered both from Darkside Developments, only place that stocks them I could find. 👍🏻

@YKRECREATION Год назад

No worries glad the video helped, Ebay sell them also

@Shera_S3EYG 5 месяцев назад

No green ones a 4 and grey is 2 pin

@9bytehub Год назад

Why does their gotta be two!! The first one i think i can manage if I decide to do it myself

@YKRECREATION Год назад

tell me about it ! and that if that does not fix it you need to check your wiring , click here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FjPWzsZcltc.html

@markek8022 4 месяца назад

My jetta struggles to start after the 4th or 5th attempt. It always starts with no problem the first 3 times. My radiator fans are always on as well. A bad ect sensor?

@YKRECREATION 4 месяца назад

try this if your fans are on, if it doesnt work then follow the wiring repair video guide, seems like you have pressure issue also

@BeatboxSwe Год назад

Hi! I just did this on my Car and sudenly the sensor popped out in the middle of the road! I put the Clip on and wiggled it before and it was on good?

@YKRECREATION Год назад

Did you check that the rubber seal was on properly and it was tight? Also was it a new clip you used, sounds like maybe only one side was clipped in and with pressure it may have popped, try pushing down hard and then pushing clip in

@MrJohnEco 10 месяцев назад

If you did as in the film, you put the old o-ring in the pipe instead of mounting a new one on the sensor, I understand that you had problems.

@tomtom8308 2 месяца назад

great vid buddy thanks a lot

@YKRECREATION 2 месяца назад

No problem 👍glad it helped, unfortunately for me after i replaced sensors i had to fix the wiring harness as the fault re appeared

@juanf.435 Месяц назад

My mechanic recommended i replace both the sensors in my 2018 vw Passat r line (American version i think), i was just wondering if it is the same sensor for both locations? Thanks in advance.

@YKRECREATION Месяц назад

Hello buddy, for your car I'd suggest going to your nearest car part store and asking them if both sensors are the same, they was on this particular model, just to be on the safe side, best to change both then it rules out both sensors causing trouble later

@CryptoLos 12 дней назад

What code did you get ?

@isthianthomas6386 Год назад

Do I need to replace both of them? Or could it be possible that only one of them isnt working

@YKRECREATION Год назад

I replaced both, better to do both then they are out of the equation, but my fans were still on, I had to fix the wiring, check out the wiring repair video, both easy fix if your hands on, and it's also common for wiring to break, try sensors first if not then try this m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FjPWzsZcltc.html

@rickwhitfield7617 5 месяцев назад

Nice video buddy! Are both those sensors the same part?

@YKRECREATION 5 месяцев назад

Yes they are, thanks buddy

@Shera_S3EYG 5 месяцев назад

They're diffrent part numbers green ones a 4 pin and greys a 2 pin 👍

@gabrielxhaferi2920 Год назад

I have Audi A3 2.0 tdi 2004. it does not start well in the morning, or when the engine is cold. I changed Injector seals, glow plugs, and not working. Its the same. Can u help me please??

@YKRECREATION Год назад

Do you have a good battery on the car ? That could cause slow starts when cold

@afty01 4 месяца назад

Where did you buy the coolant sensors and are they both the same?

@YKRECREATION 4 месяца назад

Ebay, yh same

@TarrinWright-qt1cc Год назад

Same spot on the W8 4.0 v8??

@YKRECREATION Год назад

Oh my now that's a big boy engine 😳 no idea on them, what I would suggest is follow your radiator pipes or check near your thermostat, they are usually located around there

@everesth2751 Год назад

One of my cables on my sensors was cut off could that be why my fan is always on ?

@YKRECREATION Год назад

Yes you need to re connect

@rudolfmaluleke7622 5 месяцев назад

My 2015 polo have a similar problem, when its hot the car takes time to start but when its cold no issues...could it be the temp sensor?

@Seanwyndham 20 дней назад

Did you find out if this was the problem? Having the same issue with my scirocco!

@forzainter8380 Год назад

Good day. I have a problem with this sensor. Passat b6 2005 2.0 103kw. When the sensor is on and when the car reaches a temperature of 90c and when I turn it off and try to turn it on again, the car only starts for a short time and turns off. So 3 to 4 times, then I turn the key, and hold the gas to the floor and then it starts, but not every time like that. When it gets a little cold, it starts without any problems, especially when it's cold.

@YKRECREATION Год назад

Sounds like you need to get a diagnostic check done, check what fault code it's showing and then see from there

@waelelbai Год назад

I've having similar issue you've described above. What was the solution please? it got me thinking battery, starter etc??

@Seanwyndham 20 дней назад

@@waelelbaiDid you find the solution, having the same problem?!

@venomdealer790 9 дней назад

are both sensors same? i mean, how do i order it? just two units of the same replacement part or different parts?

@YKRECREATION 9 дней назад

Yes they were the same, best to order from your nearest car parts dealer

@venomdealer790 9 дней назад

@@YKRECREATION thanks bro ❤️

@YKRECREATION 9 дней назад

No worries hope it gets sorted 👍🏼

@EduardGrek 6 месяцев назад

It's smaller becuase it's new and the old one had wair on it

@YKRECREATION 6 месяцев назад

tried it a good few times just wouldn't seal properly, 3 years later the same old seal i used is holding up, sometimes with cheap parts they dont make them to spec, even brake pads these days need the edge grinding to make them fit

@johnhagler8764 4 месяца назад

I just couldn't watch no more after I seen that

@peterfarbar6786 4 месяца назад

Are the Both sensors same ??

@YKRECREATION 4 месяца назад

yes

@garylawton9126 5 месяцев назад

My temp dial is going daft goes to 130 nearly then back to 90 and is OK at 90 rest of day when its saying 130 on dial the watwr is actually tepid hot i botte too is this a temperature sensor issue? Thanks

@YKRECREATION 5 месяцев назад

sound like your car is over heating, does it do it when sat in traffic?

@garylawton9126 5 месяцев назад

@@YKRECREATION no

@garylawton9126 5 месяцев назад

@@YKRECREATION what is it? Thanks

@colin5064 Месяц назад

I think there is only one water temp sensor on the VW Golf Mk6 1.6 tdi. So are you working on a VW 2.0 you make no mention what engine

@YKRECREATION 29 дней назад

This is a Vw golf mk5 1.9 tdi

@colin5064 29 дней назад

@@YKRECREATION OK thank you

@YKRECREATION 29 дней назад

No worries let us know how you get on

@afty01 4 месяца назад

Whats the make of the sensors. Thanks

@YKRECREATION 4 месяца назад

I bought any cheap ones and they are still working till today

@dennispowers7261 3 месяца назад

on bkd 2.0 tdi engine where is the second sensor? thank you

@YKRECREATION 3 месяца назад

follow pipes should be in similar location on the pipes or thermostat

@bradjay5408 7 месяцев назад

Could this cause the heater to only blow warm ish air

@YKRECREATION 7 месяцев назад

no this is only for it not working on 123 fan control, is your heaters not warming up as they should ?

@bradjay5408 7 месяцев назад

@@YKRECREATION the warm that’s it they suddenly get a fishy smell and blows 30amp fuse and stop sign comes on check coolant

@kvajeblostari 10 месяцев назад

Hello are both sensors the same?

@YKRECREATION 10 месяцев назад

yes

@rudolfmaluleke7622 5 месяцев назад

My 2015 polo VW struggles to start when the temperature is hot outside and even the temp read in the car is normally higher than it actually is. Is this might be the sign of faulty sensor?

@YKRECREATION 5 месяцев назад

no either fuel pressure or spark or glow plugs

@franks.5834 12 дней назад

Does anyone have the part numbers, are both sensors the same?

@YKRECREATION 12 дней назад

They are both the same on this vehicle, go to your nearest car parts store they will have all the information you need

@s.lainez.n82 4 месяца назад

Hi Wich one is for the water pump?

@YKRECREATION 3 месяца назад

the sensor is for tempreature

@s.lainez.n82 3 месяца назад

@YKRECREATION I understand sorry to ask again but I saw 2 sensor in the video wich one is temperature??

@sorinmre Год назад

Hi what could be the problem if the fan on the left hand side (smaller one) keeps running even if the AC is off? Thanks

@YKRECREATION Год назад

They usually spin slowly at times, can you hear it actually running full speed ? And check that your ac is actually off, on some cars the button can be messed

@sorinmre Год назад

@@YKRECREATION I had the AC button off & the fan was running at full speed.

@YKRECREATION Год назад

@@sorinmre not sure then mate not looked into that side of it, but sensors are cheap if you wish to try

@sorinmre Год назад

@@YKRECREATION I'll try this next week & see what happens, thanks 👍.

@YKRECREATION Год назад

No problem, see my other video where after I changed the sensors the issue was still there, so I had to fix the wiring that was damaged

@angelnieves9222 2 месяца назад

I just changed my coolant sensor on my 2002 vw 1.8 passat but when I start the car I still had the engine light on is that normal I use my scan tool and remove it anyone have any thoughts please comment

@YKRECREATION 2 месяца назад

yes use your scanner to remove the light, if it comes back on after a bit you have a fault that needs fixing

@angelnieves9222 2 месяца назад

Ok thanks

@adolg4049 9 месяцев назад

I change it today mine on golf 4 But Still no radiator fan cames on When gaauge goes 90 temperature THE shOp man says it was wiring fault bcz Previous owner was Using automatic gearbox and after he change alot Wiring left Bad connecting so i buy that sensor and for nthg bcz my fan still not working

@YKRECREATION 9 месяцев назад

you issue is different to this, this fault if is fan is constantly running, to check your fans supply 12v to the actual fan to see if it works

@saifhashid3263 Год назад

What vw is this

@YKRECREATION Год назад

Vw golf 2008 1.9tdi

@greatcesarsghost Год назад

I know where the lower sensor is but I need to remove the connector witch u did not show

@YKRECREATION Год назад

Had to use both hands sorry, its simple to un plug the connector, squeeze and pull or use a screw driver

@Tony-375 Год назад

With vw connectors (works on all brands too) always push IN first then pull. I’ve had great success NOT fighting a stuck connector having pushed first!

@greatcesarsghost Год назад

@@Tony-375 The tab do u push up or down some one told me u can use a stubby screw driver to release from the the connector

@Tony-375 Год назад

@@greatcesarsghost so what you do is you push the whole connector (no tab yet) down (towards the part) and the push the tab in (disengaged) and connector up (up as in direction it comes off). A screwdriver works just be careful because you have much more leverage to break that connector and not much hand feedback.

@YKRECREATION Год назад

Good explaining mate, you should come make some videos with me 💯