Cord to Cordless Cutting Tool Conversion 100v to 20v | CO-150N

Подписаться 688 тыс.

Просмотров 162 тыс.

50% 1

I bought this miter saw from Japan recycle shop. It is 100V power tool from Japan. I want to use this miter saw in my farm for irrigation installation. It is easy to use this tool with battery instead of electric source. I decided to convert this tool from cord to cordless by replacing the motor structure from AC to DC power by 18V battery. You can see the process detail in the video.
DC motor information
- motor diameter 60mm
- front and rear double ball bearings-
- built-in cooling fan blades
-12-pole motor rotor
- carbon brush is High current and high copper content compensation type.
12V voltage, no-load current 4A, no-load speed 9200 rpm.
18V voltage, no-load current 4.5A, no-load speed 14,000 rpm.
24V voltage, no-load current 5.3A, no-load speed 19,000 rpm.
The motor weighs 760 grams.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show

Хобби

Опубликовано:

30 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 144

@brianholme366 7 месяцев назад

This is one of the few beautiful conversions I have seen, That is because of the aesthetics, the battery is correct established and no metal plates to hold the batteri, which a lot of these conversions have. For me it is not just about converting things from cord to cordless, but also the way it looks afterwards. Conversions in itself is always cool, since i come from a country, where this would cost 5 times more, than going out purchasing new goods. Keep up the good work.

@gear_show 7 месяцев назад

Thank you so much for sharing, I'm so glad you like this one.

@blatantmisconception 7 месяцев назад

It is an elegant conversion, isn't it.

@gusser2121 7 месяцев назад

Beautiful and portable miniature chop saw. This is a fantastic conversion!

@gear_show 7 месяцев назад

Thank you!

@yeagerxp 7 месяцев назад

Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself 🇨🇦

@gear_show 7 месяцев назад

You're welcome, thank you so much! You too.

@khcreative8 7 месяцев назад

Beautiful and portable miniature chop saw😍

@MASI_forging 7 месяцев назад

Great restoration 👍👍

@garyjones2582 7 месяцев назад

Very nice work G.S... You're the master when it comes to this kind of stuff.. Take care my friend...

@gear_show 7 месяцев назад

Thank you so much! You, too, have a nice day.

@user-rj2pm8nu5t 7 месяцев назад

Просто супер. На хорошую вы идею меня подтолкнули этим видео. Как всегда вам удачи.

@brianwood5220 7 месяцев назад

Excellent job, thanks for sharing.

@gear_show 7 месяцев назад

You're welcome sir, thank you!

@Akc64 7 месяцев назад

Great 👍 but i want more brushless upgrades 😅

@shadullaasadulla4735 7 месяцев назад

Great job Mr gear show very nice video

@pitaeata8493 7 месяцев назад

you do excellent work.

@panaphobic1 7 месяцев назад

yeah, i want of these now. seems super handy

@zoisbasis7791 7 месяцев назад

Excellent job 👍👍👍

@user-rt8lw8qw6g 7 месяцев назад

Теперь мини-торцевик стал аккумуляторным и с таким успехом превращается в„болгарку"(Ваш доброжелатель Андрюша Потаповъ).

@gear_show 7 месяцев назад

Спасибо! хорошего дня!

@marianpintilie7799 7 месяцев назад

The skilled grand master is now again with new impressive converting...Great job Mr. Gear Show🇷🇴🇷🇴♥️♥️👏👏

@maksnunorm1760 7 месяцев назад

Вы из Румынии Я знаю румынский

@gear_show 7 месяцев назад

Thank you so much!

@maksnunorm1760 7 месяцев назад

@@gear_show 👍👍👍👍

@elonkiss8066 7 месяцев назад

Hi from Hungary 🇭🇺🖐️

@maksnunorm1760 7 месяцев назад

Hay 🇺🇦🇦🇩🇲🇩

@user-kt2hb8xr3p 7 месяцев назад

thank you teacher❤❤❤ Great job, thank you brother. You are so talented

@gear_show 7 месяцев назад

I'm glad you like it, thank you!

@Szpila31 7 месяцев назад

Nice clean job

@gear_show 7 месяцев назад

Thanks 👍

@djevo3441 7 месяцев назад

Amazing job my friend congratulations 👏👏👏👏

@gear_show 7 месяцев назад

Thank you very much🎊🎉

@khalilrabah2237 7 месяцев назад

J'adore jolie travail comme d'habitude 👍

@gear_show 7 месяцев назад

Merci beaucoup! Je suis content que tu l'aimes.

@ArifKamaruzaman 7 месяцев назад

as always, good restore.

@liftrucs 7 месяцев назад

Nicely done

@gear_show 7 месяцев назад

Thank you sir!

@Mustafa.B 7 месяцев назад

Great work .

@gear_show 7 месяцев назад

Thank you

@manco72280 7 месяцев назад

Excelente trabajo 👍 un saludo

@gear_show 7 месяцев назад

¡Gracias! Me alegro de que te guste.

@sudheerk9050 7 месяцев назад

Fantastic conversion my bro❤❤❤❤❤❤❤❤❤❤

@gear_show 7 месяцев назад

Thank you so much 😀

@chris_hertford 7 месяцев назад

18v cordless finger remover! I'd keep it for metal work only could be a useful mini cut off grinder

@gear_show 7 месяцев назад

Thanks for the tip!

@aaditya._.007 7 месяцев назад

Amazing videos

@gear_show 7 месяцев назад

Thanks

@vinceianni4026 7 месяцев назад

Hello mister good job well done

@gear_show 7 месяцев назад

Hello welcome, thank you!

@prasadvn524 7 месяцев назад

Beautiful

@nelchan2421 7 месяцев назад

last video of October 2023 awesome video

@gear_show 7 месяцев назад

Thank you!

@abed6127 7 месяцев назад

I hope there will be new videos with modifications to kitchen equipment such as the coffee grinder

@ProdByTimDuncan 7 месяцев назад

Very nice restoration! Thank you for all your work you put not only in restoration and modification but also in video editing etc.. One Question: What type is that little hand held screwdriver you are using? Seems like a really powerfull model. Thanks in advance.

@FerSniper 7 месяцев назад

Лучший, спасибо за потраченное время!!!

@gear_show 7 месяцев назад

Пожалуйста, я рад, что вам понравилось.

@abuyahya1043 7 месяцев назад

Very nice gunice

@gear_show 7 месяцев назад

Thanks

@rishabhgupta3562 6 месяцев назад

Amazing work as always watching your every video since 1 yr... please also include how much time it run after modification

@Tatal.b 7 месяцев назад

Sensacional muito bom ,bom mesmo

@amex8325 7 месяцев назад

Gud job bro... ❤❤

@gear_show 7 месяцев назад

Thank you!❤❤

@jamilkhokhar3460 7 месяцев назад

Great 👍 👌

@gear_show 7 месяцев назад

Thanks 😊

@SurjaMondal-mp6fe 7 месяцев назад

I like the motor

@gear_show 7 месяцев назад

This motor is so powerful.

@crowblunt536 7 месяцев назад

3:25 THAT'S ONE CHUNKY MOTOR I'VE NEVER SEEN BEFORE

@gear_show 7 месяцев назад

Yes, It is a disassembled motor.

@mrhkexperiment 7 месяцев назад

Gjb

@Ishimazure 7 месяцев назад

Brilliant.

@gear_show 7 месяцев назад

Thank you!

@paulofloresjunior 7 месяцев назад

Great job! I don't know if it will run cooler with two fans, maybe if you not had installed the old fan the fan inside the engine could get more fresh air, what do you think? Nice vídeo by the way, thanks for sharing

@gear_show 7 месяцев назад

The old fan is positioned well to follow air out from inside. It okay not to install old fan, but it needs to make some holes on the new fan position.

@paulofloresjunior 7 месяцев назад

@@gear_show yeah, I thought will run cooler without old fan, but you are right, it will need news roles next to engine fan. For a short period of work it will not be a problem. Cheers from Brazil

@MonttiSingh 7 месяцев назад

Gear Show!!!

@gear_show 7 месяцев назад

Thank you!

@user-kt2hb8xr3p 7 месяцев назад

شي جميل ورائع متابعك اخي الكريم

@gear_show 7 месяцев назад

يسعدني سماع ذلك، شكرًا جزيلاً لك!

@BAO_Bonsai 7 месяцев назад

Konversi yang luar biasa

@nathkrupa3463 7 месяцев назад

Great work sir hat's off 👏 Sir you used glue which brand available online please tell sir. thank you so much

@gear_show 7 месяцев назад

You're welcome, I'm glad you like it. It is metal AB glue.

@johnbradford9235 7 месяцев назад

Niiiiiiice 👌👌👌. 😎

@gear_show 7 месяцев назад

Thank you!

@sebastiannielsen 7 месяцев назад

Anyways, when welding with your battery welder, which settings do you use then? I have started welding batteries and I use 02mS preheat, 05mS gap and 10ms Weld, and 01th "Numb". Getting pretty decent welds, but what do you use on your welder?

@kevinarnold7065 7 месяцев назад

What brand screw bits do you use? I'm having a difficult time finding quality, long, low-profile drivers bits.

@BenEyah 7 месяцев назад

Looks like it should be on “dangerous grinder attachments” plenty of stuff similar on there

@gear_show 7 месяцев назад

Yes, the same, but different.

@JhoanestibenMarinVillegas 7 месяцев назад

Super like

@gear_show 7 месяцев назад

Big thanks

@yufadanpratama4011 7 месяцев назад

Saat kreatif dan simpel

@juanlafuerza 6 месяцев назад

Hello man, did you made cord to cordless Makita blower? thanks and good work. Greetings from Spain.

@gear_show 6 месяцев назад

Hello 👋 I never did it. Thank you!

@DatBlueHusky 7 месяцев назад

you adding back on the fan will make the motor overheat because both fans will be fighting for air flow

@gear_show 7 месяцев назад

Okay, I'll see it again, thank you for feedback!

@mikelhot8289 7 месяцев назад

not bad 🙂

@mdeletricksoficial 7 месяцев назад

Esse motor "caiu como uma luva"

@gear_show 7 месяцев назад

Sim, é, obrigado!

@moisemarius246 7 месяцев назад

WHAT A+B soldering solution do you use??thank you

@gear_show 7 месяцев назад

It is metal A+B glue.

@Saber_Matrix 7 месяцев назад

👍💯

@davidacosta8978 7 месяцев назад

Wow Gracias 🥰🥰🥰🥰🥰🤜🤛🙏 Dios

@gear_show 7 месяцев назад

Thank you!

@davidacosta8978 7 месяцев назад

@@gear_show You capitulo

@m.s.899 7 месяцев назад

was that used without any protection before? if so, i wonder how many finger this device cut...

@gear_show 7 месяцев назад

Yes, maybe, It is really dangerous to use it without protection guard.

@blatantmisconception 7 месяцев назад

Be easy to add a speed control to now too.

@nampham3310 7 месяцев назад

Rất tốt b cho mình biết moto bạn sử dụng là moto gì vậy thông số như thế nào

@user-hl6uh6ge2j 7 месяцев назад

Прикольная игрушка

@alexandres8846 3 месяца назад

997 dc motor model?

@marjukii-ze5vw 7 месяцев назад

🇾🇪Indonesia nyimak......

@gear_show 7 месяцев назад

Wow Terimakasih!

@mateuszszymanczuk9536 7 месяцев назад

You can convert bench grinder from 100v or 220v to 20v dc for makita battery

@gear_show 7 месяцев назад

Yes, when the time comes, I will do it. Thank you!

@mateuszszymanczuk9536 7 месяцев назад

@@gear_show I waiting for that video but i have bench grinder to convert and no idea how to do it

@Ravi_Sachchade 7 месяцев назад

What was that black chemical you applied to fix the screws..?

@thehochmaster2 7 месяцев назад

Looks like metal-infused 2-part epoxy

@sergueiothonucci1638 7 месяцев назад

😃

@gear_show 7 месяцев назад

😃

@sebastiannielsen 7 месяцев назад

That O-ring motor mount solution... worst ever... you snag on something like a nail when sawing and motor will turn inside casing, ripping cables and everything. Would suggest mounting L brackets (with threads on one of the holes) on the intended mounting hole on motor, and then drill a countersunk hole in the plastic. After assembling everything, put countersunk screw into hole so it screws into the L bracket on motor, giving a physical holding force. Can be combined with the O-ring solution for even more sturdiness.

@gear_show 7 месяцев назад

Okay, thank you so much for sharing!

@pcfnokia273 7 месяцев назад

Có vẻ chạy yếu hơn khi chạy bằng điện, cắt cũng yếu hơn 😂😅

@ledart 7 месяцев назад

good job! しかしなんか安全カバーが不安;()

@LifeProTipss 7 месяцев назад

@gear_show 7 месяцев назад

@YesyegHehehr Месяц назад

Assalomu aleykum

@aaaatttt101 7 месяцев назад

Are these tools people bring to you to be modified? Or do you acquire them yourself to sell on? Also. Have you ever considered making a power pack that would supply mains rated equipment?

@gear_show 7 месяцев назад

I bought this tool for cutting PVC for irrigation installation in my farm.

@MrAltuntas 7 месяцев назад

Motor havalandırma kısmına koruma yaparsan toz olmaz

@gear_show 7 месяцев назад

Ama motor ısınıyor, yine de bunu paylaştığınız için teşekkürler!

@MrAltuntas 7 месяцев назад

@@gear_show biraz mesafe bırakılırsa bence sorun olmaz aksi taktirde toz içine girer ve motora dahada zararlı

@AlexanderGee 7 месяцев назад

Very odd design for the tool. Looks like they started with an angle grinder and did the minimum possible to adapt it.

@gear_show 7 месяцев назад

The internal motor is similar to an angle grinder motor.

@Nik-dn6wv 7 месяцев назад

But the saw is quite dangerous without protection

@gear_show 7 месяцев назад

Yes, it is.

@vazmoslavzenzerovic7530 7 месяцев назад

CAUTION: Don't do this at home ! Don't do it anywhere !!! DON'T DO IT !!!

@anonymously241 7 месяцев назад

R you Indian?🇮🇳

@mrmanusia 7 месяцев назад

from japan

@motoboot2616 7 месяцев назад

I have a request to the American segment of viewers, how do you feel about Russians (I am from Russia myself🇷🇺)) and how do you feel about Ukrainians 🇺🇦, I welcome any comments to my address, thank you in advance for the time spent reading this comment😊