Crane M3 with the Canon M50 and the Sigma 16 mm? 

Finally the long awaited video for this setup has come! Thank you Mark!

Bro you nailed it. You said everything. Thanks for the video.

Note - with this under-slung work around, you will have to flip the footage in editing (the camera is upside down), this is easily done in even the most basic editors.

This is a beautiful setup! Wish I could afford this gear. Thank you for doing this test!

Yessss.. The video I been waiting for

Good enough stabilization with such a wide lens, thank you for demonstration. Did you trying this gimbal with some lens like 50 - 70 mm ? Any good results with footage shaking ?

Excellent video! Thanks so much for the test footage and tips.

Great video ! I've been hesitant to get this rig for my m50 ii , but this pretty much makes it clear that I can work with it 😌 Thank you 😊

How do you connect the camera to canon r10? i dont know

Hi mark, what picture profile did you use on this video? did you colorgrade? the color is so nice. im using 16mm sigma too..

Episode 2: Mark tests the stabilization while running away from a rabid band of kangaroos.

Hello Mark, I discovered your channel a couple of days ago and you make things so easy to understand. I became an instant subscriber. Now that I'm retired I want to dig deeper into photography and combine it with my other hobby cars. I recently purchased an M50 and still learning it's functions. What would you recommend for a second lens to accompany the EF-M 15-45mm f/3.5-6.3 IS STM lens it came with the kit. I also have a Tamron 24-135mm 1:35-5.6 Macro lens Also have you posted a video with all the functions the camera has. Thanks a million

Hey Mark. Nice video which appears to give a solution for the M50 and Sigma 16mm lens on the Crane M3. However, with such a large aperture on the 16mm lens you need a VND on the front if you're going to use it in daylight and this seems to push the Crane M3 past its limit. Even with counter balancing with the wireless mic receiver on the hot shoe mount it doesn't quite work. The other issue is the battery life of the LP E12 is poor and therefore you have to dismantle the rig, replace battery and rebalance which is a pain. But let me know if you've found a workaround or have a different experience.

I think the main interference is the eye piece, and you could reposition the wireless mic, but the eye piece is the problem?

Great video, thanks! Working towards the exact same setup, only that I use the Rode Wireless go II.. which also works great. Awesome job!

Hey great video as always. Quick question if I wanted to mount a shotgun mic on the m50 do I just balance the crane M3 the best I can within the limited range of motion? You know because the mic is on top does it matter that I can’t tilt the lens to the sky to balance it? Will it still work you think?

Hello Mark, Great video, buddy. Just wondering if you have tested the Crane M3 with the Sigma 16mm + ND filter. I was able to stabilise the gimble just with the lense, but once I put the ND filter on it was impossible. I'd appreciate your answer. Cheers buddy.

How did you balance with microphone on top ? When I try it hits when balance front back

So, sony a6400 + sigma 16mm should also work, right? This is not seen in compatibility list. Confused! Don't want to take Ronin SC due to its bigger size and also I want to use Iphone pro max 13 as well

Do you color correct or are all of these settings out of the camera? I am far from satisfied from how my shots look from within camera settings.

Thanks for this video.

Unfortunately I couldn't balance my m50 with the smallrig cage attached. I used the standard adapter plate that came with the crane. I tried to youtube it but nothing came up.

So I have your exact set up, I just have such a hard time balancing the sigma on it and I can’t find a video of the exact position everyone has it in to balance it 😭😭

How about crane m2s

Anyone tell me why you'd do the Crane M3 over something like DJI's solution? Can even get theirs refurbished for much much cheaper, just wondering.

can you try using the Zhiyin Crane M3 with the m6 mark ii?

How did you mount it vertically

Is there any way to compress mic on the ride wireless Go?

How to connect the m50 to the m3?

i can hear the motor sound

Be aware of those kangaroo.