Crawler Canyon Presents: ICFTLS 3(?) first drive of the V-Nix

Подписаться 8 тыс.

Просмотров 1,8 тыс.

50% 1

Fresh from the June 28 livestream, the Canyon finally gets their very own VRD, after having built... a few. Having no desire to slap on another tucked or cab, this one gets a Bitty Design Rock1 cab and inner bits from a Phoenix, so this VRD has a sprinkling of Phoenix in there to make it work. A VRD Phoenix, the V-nix.
Get a Crawler Canyon tee! www.cafepress.com/crawlercany...
Some links:
VRD Carbon alnk.to/g3bkdTX
Fusion SE 1800 alnk.to/aeYkZLZ
Flash Hobby 60kg amzn.to/3RM5pvi
Rock1 cab alnk.to/cwSbKo5
Tusks alnk.to/90z2851
Deeps amzn.to/4bpRW39
RC4GS amzn.to/42hsXL7
GensAce 3800 amzn.to/3I8h4PJ
IG: crawlercanyon
Amazon list: www.amazon.com/hz/wishlist/ls...
The Tire Test Protocol Spreadsheet:
docs.google.com/spreadsheets/...

Хобби

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@CraigSimons 22 дня назад

I love the comment about building a rig so good you get lazy. I see it in full size rock crawlers, and often the solution is as you said, take something less built through an obstacle just to challenge yourself. We do deserve an easy mode from time to time, but as you said, three rigs seems ideal. extreme scale, extreme performance, and the middle guy is your balance point.

@Tyrells_Tiny_Trucks 23 дня назад

7:39 My VRD kit works REALLY well on Tusks. I also tend to consider them cheap in comparison to the Prolines I'm coming from (instead of expensive compared to Injoras). I also probably won't be swapping to any comp pins any time soon 'cause, y'know, cosmetic reasons. Long live Tusks.

@derrickhays3627 23 дня назад

Gorgeous truck a V-Nix is born! Great combo wouldn't change a thing. Thanks for sharing.

@HVT03 22 дня назад

If you see that body, you dont expect what it does. If it works as good with a hardbody, Vanquish did THE THING with the VRD kit

@Driver86421 23 дня назад

I like FJs but not Vanquish's take on it, and boats belong on water, not rocks, so the Bitty Design body gets the thumbs up. Man, that thing just goes. It might be interesting to see how this compares to a Zoku Phoenix, if only there was one kicking around the Canyon....

@Camocrawler2868 22 дня назад

That body looks killer! Thanks Mr C now I'm gonna have to order one for my zrd. That rig does what you tell it, just awesome man 👍

@adam_chevyss 22 дня назад

On my Carbon I rotated the spur until it was at the tightest point on the pinion then loosened the screws slightly and pushed it to the opposite side a little and tightened it back down. It made a big difference in sound/mesh.

@dkmgm2011 22 дня назад

Very unique look. Drives great. Sick rig. 🤙

@ryanalbert5576 22 дня назад

Great episode man! Slow clap 🥃

@chriscord6524 23 дня назад

Vanity is a worthy cause here.

@fejwe 22 дня назад

IntraVnix De Milo? One of my favorite tiny background jokes in Spinal Tap.

@sprather84 23 дня назад

I’m so glad you said that about the spur I could not get mine to be quiet. I kept thinking I didn’t know how to adjust my pinion anymore lol you would think you got it adjusted and then you rotated and it would lock up Hella tight on another spot.

@rccrawlingaddict207 23 дня назад

Couldn't you center it better manually? Just curious.

@bouncingnoise 23 дня назад

it’s possible, just loosen the 3 screws, holding the spur on the eliminator, spin it and center it as good as possible, and tighten the 3 screws. That’s what I did to get rid of the annoying “wow wow wow” noise 😅@@rccrawlingaddict207

@sprather84 23 дня назад

I centered it up as much as possible it doesn’t have too much of a noise, but it’s there

@user-ho5vm9rv1e 22 дня назад

Does that body have a lil blue in the paint?

@mikeplaysmusicandstuff 22 дня назад

Used a small cross wrench in the center nut to center the spur, then tighten the spur bolts. Removed cross wrench and have it pretty well centered. Not as much runout as observed here in the video.

@RiceCrisp320 23 дня назад

Idk if I am alone on this but I'm getting a lot of V's in this episode. Makes me think of the speech in V for Vendetta. I'd name him 'V'. Seems fitting to me where the Canyon has a Vendetta against the VRD Stance😂 'V' the anti RTR

@OGRadGrow 22 дня назад

Performs Flawlessly. Nice 👍🏾💯

@volksrodden9522 9 дней назад

I have been thinking about getting one of those Rock1 bodies for zoku straight axle rig,….might have just sold myself on it now

@bouncingnoise 23 дня назад

I’m really surprised that it improved in stability by adding weight up high😂 but it’s definitely driving different than a stock VRD with a comp body😊👍

@rcmanchild9106 23 дня назад

Her name was Lola, looks like a Phoenix, walks like a VRD.

@rccrawlingaddict207 23 дня назад

It has way more FLEX than you typically like, 2% less underdrive than the PRO which is more than you like, yet you're all giddy like a kid with a new girlfriend. Nice build Mr. Canyon man and I can't wait to see the two battle it out in the CANYON....literally.....put them in the "Canyons"!

@user-ho5vm9rv1e 22 дня назад

Believe it’s also meant for the fordyce Mr.C. Have you seen the piece being sold to go into vrd twin, that will give you FRONT AND REAR dig? Thinks it Ty’s Customs n Colorado. He’s a cofounder of We RC Rock. And an FYI Vanquish is releasing two more kits. VRD Carbon with straight axle and a VS4-10 builders kit! They’ll both be n Trucks of Freedom boxes too. “Rubber Side Down,” you watch Logan don’t you!?!?

@brianmassey7563 22 дня назад

well then, we need to add the portal option to the Pro, and then we can compare the same axle type on each platform

@DIllybarification 22 дня назад

I'd love to see a VRD on the H10 axles vs. a 10 pro. I think that'd be a very interesting battle.

@CrawlerCanyon 22 дня назад

As long as turning circle isn't a point of comparison, I guess. The H10 axle turns WIDE.

@DHFHades 23 дня назад

very nice, portmanteaus tickle my tism in a pleasant way :)

@FaithSaraG 23 дня назад

What a weapon!

@KTMKID450 22 дня назад

Mt. trepador needs a over head entrance trepador tunnel sign .....

@Steve_J81 22 дня назад

I have watched every video you have released, along with the cycling one (even though I despise cyclist) and I have come to the realization that our tastes on what looks good are wildly different 🤣 which is perfectly fine because if everyone liked the same thing the world would be boring.

@themountain59 22 дня назад

what is your problem with bikes ??

@Steve_J81 22 дня назад

@@themountain59 I don't have an issue with bikes I do have an issue with the morons in my area that choose to ride in the car lane even though they have a bike lane.

@stunod-RC 23 дня назад

Boom 💥. Let’s go!

@JohnCammarota 23 дня назад

I like it mr.c doesn't look like the extra 300g. Bothered it to much at all. It obviously did everything you asked it to do. Were the inserts designed for the Tusk and are they weight specific inserts? Did you notice any hang ups on the rear bumper? Looks like it is a good amount lower then the bumper position that comes with the kit. I do understand its needed for that rear cage to clip in. Was just curious if you felt it hang at all. Also not important but wanted to point out the overdrive underdrive is 37% i know. No biggie. Just letting you know for future reference.. good job. Great vid. Peace out...

@mikeplaysmusicandstuff 22 дня назад

I think my comment may have been deleted because I had a link in it. However, I have a 3Dcults page under MDF-3D with a skid to bolt a VFD Twin into the VRD. I’d love to get your feedback on it! I’ve been running mine for months!

@corybenway6562 19 дней назад

I like bittydesign bodies but for some reason they missed the mark on this body IMO. Going to be picking up a carbon kit today.

@phillashford937 22 дня назад

The name is Mr. Power Creep to you.

@LumpkinMumfins1 23 дня назад

I don’t hate that body. Might have to swap my Fordyce for that… but then Coyote Grande… 🤔🤔

@TheOtherSock-728 23 дня назад

Hairy Crawler in the order of a Venix

@graymatter45 20 дней назад

I just ordered one of those bodies for my Phoenix.

@TheOtherSock-728 23 дня назад

Howdy!

@BrandonM83 23 дня назад

Hello canyoneros

@BrandonM83 23 дня назад

That body is absolutely beautiful Mr C

@charleshurley8927 22 дня назад

is that the same color that you painted my spider?

@CrawlerCanyon 22 дня назад

The Spider is Tamiya PS-32 Corsa Gray, while the V-Nix is Krylon ColorMAXX 5530 Peekaboo Blue.

@jimbocreationsbu8203 22 дня назад

he can be a STEVE - then it is steV-nix

@ydrRC 11 дней назад

You could run these on a WRCCA 1.9 Mini class, but you orobably still wouldn't because you can go bigger than these.

@SamStevens-vo9xx 23 дня назад

@thindigital 23 дня назад

Brethren...

@themountain59 22 дня назад

Well..a rather underwhelming build...VRD, fusion, budget servo,Tusks and it runs good...big surprise ....yawn🥱 I really dont like the body but the color choice is ace.