CREAK DETECTIVE! How to Resolve Your Noisy, Squeaky, Creaky, Bike!

Подписаться 129 тыс.

Просмотров 71 тыс.

50% 1

Get your new chains, your lubes, greases, and torque wrenches from ‪@competitivecyclist‬ alnk.to/6TulOTB
They do NOT have Sherlock Holmes hats. This was just a silly prop. Really it wasn't useful at all.
Filmed/edit by ‪@MitchBoyer‬ (a rare, under 10% gradient video for him)
Intro Music: Bad Religion
Outro Music: @brooklynduo
Want to support me and my show? Sponsors take care of that, so please consider a donation instead:
act.sierraclub.org/donate/rc_...
Contribute to my No Kid Hungry Campaign
p2p.onecause.com/chefscycle20...
My Recovery Product: www.icelegs.com
Order Cookie Merch and Phil's Books: www.philsfondo.com/shop
Follow Me!
/ philgaimon
/ philgaimon
/ philgaimon
/ strava
My website: www.philgaimon.com
Ride with me at Phil's Fondo in Malibu: www.philsfondo.com/
Brought to you by Jukebox! www.jukeboxcycling.com www.jukeboxprint.com
Bikes by Factor @factorbikes factorbikes.com/
Chapeau Power Analysis @chapeaulabs chapeau-labs.com/ (PHILSENTME for a discount)
Clothing by Starlight/Black Bibs @starlightapparel @theblackbibs
www.starlightapparel.com/ www.theblackbibs.com/
Components by Shimano @rideshimano bike.shimano.com/
Decathlon Outdoor Gear @decathlonusa alnk.to/eOGrXwk
E-Bikes by State @statebicycle www.statebicycle.com/?avad=29...
Inside Tracker Blood Testing for Nutrition and Health: @insidetracker DISCOUNT WITH LINK InsideTracker.com/PhilGaimon
Bici Bucerias Mexico Bike Tours: @bicibuceriasmexicancycling7143 bicibucerias.com
Computer/Heart Rate/Kickr/Pedals by Wahoo @wahoofitnessofficial www.wahoofitness.com/
In Case of Emergency call Bike Legal @bike_legal bikelegalfirm.com/
12 Speed Bar End Garage Door Opener @12speed 12speed.com/
Crotch happy thanks Chamois Buttr @chamoisbuttr www.chamoisbuttr.com/ (PHIL25 for a discount)
Training plans/Optimize App from Fascat Coaching @fascatcoaching 25% off Optimize App with PHILSENTME
Seattle Coffee Gear @seattlecoffeegear scg.click/PhilMio
Automatic Discount for Whoop: join.whoop.com/philsentme
Bike Bags (for travel and on-bike) by Orucase @orucase www.orucase.com
Hydration/Supplements by First Endurance @firstendurance firstendurance.com/
Bike racks on the go by @seasucker www.seasucker.com
Gloves by Handup @handupgloves handupgloves.com/ (PHILSENTME for a discount)
Mobile Bike Shop @velofixlosangeles www.velofix.com/locations/gre...
Glasses by goodr @bikegoodr goodr.com/collections/biking
Endurance lotion for watts from Lactigo @lactigo www.lactigo.com/pages/phil-ga... (PHILSENTME for a discount)
Bike would be stolen if not for Ottolock @ottodesignworks ottodesignworks.com/ (PHILSENTME for a discount)
Accessories/Chain Lube by Silca @silca_velo silca.cc/
Kenda Tires @kendatire www.kendatire.com/ (PHILSENTME for a discount)
Ridge Supply Socks @ridgesupply www.ridgesupply.com
Lazer Helmets @lazersport (PHILSENTME for a discount) lazersport.us/discount/PHILSENTME

Спорт

Опубликовано:

5 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 564

@BIIIKES Год назад

Ha, Phil… the joke’s on you. I had a noise, replaced my BB and the noise went away… until I rode it again 2 days later and the noise was back. Darn you! Haha (was the seat post)

@worstretirementever Год назад

I’m convinced that this accounts for almost as many bottom bracket sales as oatmeal raisin cookies that are mistaken for chocolate chip

@BIIIKES Год назад

@@worstretirementever hahahaha, probably

@StuartWurtman Год назад

As a bike shop employee, I can say checking chainring bolts is always on the short list.

@piast99 Год назад

I agree 100%. Or the spider - crank interface if there's a direct mount system.

@dpgrenfree Год назад

This was my problem, one bolt missing, the other loose, and only creaked on the big ring when power applied on the left hand side (non-drive).

@Nick-mu9nx 10 месяцев назад

Boom that, was my creak.

@GianDescends 2 месяца назад

I cleaned my chainring bolts and the noise went away thank you

@slugchild 2 месяца назад

@@dpgrenfree Same as mine, good job I ordered a new BB and sussed the creak before it arrived... LOL

@david.vandergoes Год назад

I’m 50. It was my knee. Well both of them. And my hips and ankles. Bike is working great. It was not the BB.

@talibe801 Год назад

Im 60 and the same problem...

@spilltheteawithshe1904 4 месяца назад

🤣

@EverettWilson 18 дней назад

We're the bottom bracket.

@underoathuea Год назад

I had a squeaky bottom bracket the last few days. So the bike shop had to fix it by tightening the bolts of the chainring. Classic bottom bracket fix.

@jonathancano6387 11 месяцев назад

mountain roads are rough i my neighborhood. Despite this, I was stupid enough to buy a bike with a ceramic BB. Several times the creaking WAS my bottom bracket. My current bike has a steel BB.

@zebounce Год назад

I never thought I'd see Jim Carrey play a bike mechanic playing Sherlock Holmes

@RyonBeachner Год назад

For how many Cannondale’s Phil has rode, it’s amazing how it’s never been the Bottom Bracket.

@seanbeckett5611 Год назад

Came here to say Cannondale. It’s never not the bb

@ukestjohn Год назад

Have a Cannondale Synapse. Never has been the bottom bracket. Has been, seat bracket, seat post, cable knocking on frame, quick release.

@_ben_sweet Год назад

My thoughts exactly 😂

@RyonBeachner Год назад

@@ukestjohn Every brand has issues. I’m just poking fun at issues that they had in the past.

@richardggeorge Год назад

On my cannondale caad10 it's DEFINITELY the BB

@jbratt Год назад

#1. Stand up and pedal. If the noise goes away, it’s the seat/seat post. This is number one because it’s the easiest. Do the easy stuff first👍😀

@larrylem3582 Год назад

I've had seatpost clamp to saddle rail creaks on 5 or 6 occasions. Never anywhere else.

@StevenNassibian Год назад

My LBS fund that my seatpost was just dry and needed a little lube (Aluminium frame and seatpost). I had checked everywear but the seatpost. Learning everday!

@c99a Год назад

it's always the seatpost or quick release skewer or dirt between the spokes where they touch.

@SethJayson Год назад

THIS ONE. Seat post issues sound exactly like the BB ticking (not creaking) on some of our fatbikes. Sometimes it's because the seat clamp needs tightening. Also, can be seat tube burred or not completely square. I rap them down with a rubber mallet these days after carefully deburring them. Post gets fully greased. (The world's creakiest bottom brackets on my trail -- that really are the BB -- are press fit. Threaded may click if they're loose, but they rarely make that sickening creaking.

@yonglingng5640 Год назад

I once worked on a Liv Langma Adavnced that creaked when I pedaled off-saddle. When I applied downwards force to the saddle, the exact same creak was triggered, so I figured the seatpost was dry and I was right. A new layer of carbon paste later and all is well.

@MrTEmahiser Год назад

Still pretty sure it's the BB

@chrisdelaplante5515 26 дней назад

It's not !

@steve-d0 Год назад

Guy brought in his bike after being to 3 different bike shops, one replaced the Bottom bracket and the others re greased and re torqued everything etc. Still creaked. Dude was pulling his hair out. After looking the bike over on the stand could see nothing obvious. Take it for a ride and sure enough creaks all around. back in the stand silence. Put the bike on the ground and had one of the sales guys sit on the bike while holding the stand for balance. Got him to lean to the right, silence. Leaned to the left, creak. Finally diagnosed as a the pedal threads due to the owner accidentally cross threading the pedal at one point when swapping pedals and had been slowly tearing the threads of the crank arm out. Replaced the arm and silence again. Needless to say it was not the bottom bracket.

@jalanpipes 11 месяцев назад

I love this. Last year I was on a group ride here in San Diego and found myself riding next to Olympic Track Medalist, Nelson Vails. Another rider had a creak we could all hear and swore it was the bottom bracket. Nelson said, “It’s never the bottom bracket.” The other cyclist loudly disagreed. Nelson sat up and emoted “WTF would I know? I only have a silver medal in bike riding.” I remembered that and always problem solve creaks starting at other points-and it’s usually my pedals (speedplay needs to be periodically regreased) or a worn chain. FFW to this month where I’ve tried all other points that I can think of and finally took it to my LBS where I described what I’d looked at already and when I experienced the creak. I got a call the next day. It WAS the bottom bracket bearings that were worn out. 😂 So, it’s ALMOST never the bottom bracket.

@worstretirementever 11 месяцев назад

Hell yeah that’s a solid endorsement

@robmagee100 Год назад

The two hardest creaks to track down for me were from a bad saddle (creaking against its rails), and slightly dirty cleats creaking in my pedals, both of which I diagnosed after replacing the bottom bracket…..

@msmendis Год назад

same here with the saddle rails.

@sirairness24 Год назад

The little rings on the valve stems.... drove me NUTS trying to figure out what was rattling. Also, sometimes the brake cables inside your frame, depending on how they were installed, can knock against your frame if you are out of saddle giving your bike the business..

@einundsiebenziger5488 7 дней назад

The first thing you remove from a new bike are these valve rings and valve caps, exactly for the reason to eliminate one source of unwanted noise.

@timyaiser Год назад

Never rule out the seatpost, particularly an alloy one. I had a nerve-racking creak once (2015 Giant Defy alloy frame) only when in the saddle and pedaling, and very pronounced when climbing. The LBS couldn't figure it out. I ended up removing the seatpost and what I discovered was horrific. After a good cleaning and some anti-seize lube, I haven't had the issue since. Keep this in mind if you ride in inclement weather. Be safe everyone!

@tadasdidvalis3246 Год назад

i was in the exact same situation few weeks ago! The dirt can get in between the top tube, clamp and seatpost.

@rbrix Год назад

I had the loudest click on the down pedal but only on the left. Wasn’t the BB but the seat post! I would had bet a $1000 it was the BB #neverTheBB

@JamesBriano Год назад

Similar experience--removed the seat post and was stunned by the amount of gunk and sandy grit I found. If you ride in the rain, you gotta deep clean.

@titejano Год назад

My bottom bracket creak was my rear quick release not being tight enough. Yes, I ride a bike with rim brakes. I even have the lawyer tabs filed off.

@amenenema Год назад

Check where your spokes cross each other (if your wheel is laced that way) - cleaning those cross points and potentially a dab of lube has fixed creaks under heavy pedaling that sure sounded like a bottom bracket creak! Oh and external cabled bikes - ferrule contacts/zip tie points/etc! And if you're convinced it's the BB - brakes on hard and step on each pedal without allowing the bike to move - great check for pedal spindle issues too.

@kecourt Год назад

I'm dealing with this right now! First time it was new pedals. Now, idk. Bike shop has it right now. They said it's never the bottom bracket. 😂 You're the best Phil!

@batpawn Год назад

It’s most-certainly the front-derailleur cable slapping against your right crank arm while pedaling. It will drive you insane for almost a month as you are repeatedly trying (and failing) to locate the origin of that obnoxious clicking sound. Have fun screwing around with your limit screws as you wrongfully believe it’s your chain slamming against the front derailleur, you absolute legend.

@patrick8574 Год назад

Mitch killed it on the editing on this one! Not that your videos aren't normally great, but this was a step up!

@worstretirementever Год назад

Haha that’s because Mitch did it

@SrFederico Год назад

Most often, it’s the saddle or the seatpost. Once, I had a squeaky noise from the bottom bracket area, but it was not the BB - it was a slightly loose spindle. I hadn’t applied enough torque when installing the chainset, and it got looser and squeakier with time.

@yazidyusop Год назад

It was the hairline crack on the in-side of dura ace Crank arm

@xchopp Год назад

Click with every crank rotation? Test the chainring bolts (thank you Zinn & The Art of Road Bike Maintenance!).

@DaneKromer Год назад

Press fit BBs get blamed for many noises they don’t deserve… I feel badly for them. Love your process and agree wholeheartedly! I once suffered a noise that ended up being my AL seatpost in any early 1994 titanium MTB frame. It only made the noise when I was out of the saddle!!! When I finally realized where it was coming from, a simple clean and lube fixed it. Another pro tip is to try only one fix at a time so you know what did it… then you learn from your bike.

@larryrwright Год назад

I have had creaks from seat rails front QR and yes, BB. BB got wet during a rainy gran fondo and I had to get the bearings replaced, so it CAN happen.

@zoomlenz Год назад

Thank you Phil. I was so sure it was the BB. I used your method to decipher the steerer tube bearings as the failure point.

@ltu42 Год назад

For me, it's some stupid spacers in the freehub. I take it apart, clean, lube and it's gone for a few rides. And once, it was the rear quick release. I was able to reproduce it by standing on the pedal with the front wheel rammed into a wall. I asked my son to come and listen where it's clicking.

@JOZLEDEACHE Год назад

For me it has frequently been the pedals. It goes away lubing up the little springs that keep you cleat in place or the thread that goes in the crank

@ElkagorasaMalfurionUSWoW Год назад

Thanks for the video and loving the comments, lots of good help. I have an ongoing issue with my back breaks. (story time) Took my bike in for the 1-year maintenance after 1000 miles. Had issue with 0 braking, lever to the grip. As part of their bigger 'package' they checked them, bled them and gave the bike back to me. No noise for first ride. Next time I went out, the noise shown up. Brakes "feel" like they're grinding. Figured I either have new brake pads that just need to be worn in a little, or some gunk on the disc. Got some brake cleaner, sprayed them off, that seemed to work, for awhile. After 100 more miles, the issue still persists. Had the shop check them again, no issues, just needed bled again. I don't think so. The brakes are slowly getting worse again, and the noise still happens when they get 'hot' (long descents). My guess is they are leaking mineral oil gunk on the pads causing the noise.

@nathanle2484 2 месяца назад

I’ve been annoyed for the past few weeks about a creak on the bike. Took off crank, bottom bracket, head tube to bearings (bottom head tube bearing replaced b/c of some mild grinding), and after watching this video I tighten up the chain bolt bearing and Eureka! -No more creaks!🎉🎉🎉

@beefeekeefee Год назад

Traveling to Mareira next month so had to get some different gearing for my trusty old FUSO. Had an 11-32 cassette from an old MTB in the drawer so cleaned that up nice and shiny and all worked fine for a few weeks then developed the dreaded creak. Checked everything (yes BB as well) and even rebuilt the free hub. Then I finally dismantled the whole cassette and cleaned each cog and spacer. That fixed it.

@fsquared64 Год назад

My ancient Vitus 979: aluminum wheels, rim brakes, downtube shifters, threaded bottom bracket. I take it out and not a sound. Newish BH with carbon everything and nearly every ride results in a new annoying sound to track down and resolve.

@chasc301 Год назад

Phil how true. My non-BB creak was rear through axle not tight enough. Cheap fix👍🏽

@nerigarcia7116 Год назад

I had a clicking on my bike that was present upon load and of course sounded like it was coming from the bottom bracket. Took it in and even the mechanic had a hard time finding it but it was a screw on the rear derailleur that wasn't tightened down all the way and the chain kept rubbing against it. The mechanic said that the sound resonated through the frame to make it sound like the bottom bracket.

@davidofoakland2363 Год назад

Seat adjusting bolts were under torqued; took me a dozen rides to figure it out, but once I torqued it down the silence brought me such joy on my rides since.

@tadasdidvalis3246 Год назад

Silent bike is such a bliss! That's one of the main reasons why i clean my drivetrain so often, i just love the silent humming when i put power through the pedals :)

@Gjuby 26 дней назад

The moment you showed the pipe trick, I knew it's gonna be a proper how-to for bikers video. Definitely thumbs up!

@SingaporeUntold Год назад

Clicking noises I’ve found 1)Seat tube shim. I thought it was the seat. Stuffed some grease between the frame and shim. Solved. 2)Folding bike. Cracking sound. Oiled the hinge. Solved. 3)Clicking from pedaling. Loose cranks. Switched to hollow tech no problem with loosening anymore. 4)Another clicking noise from pedaling. It was the BOTTOM BRACKET. Took about 100km for the ceramic bearing BB to spoil. Switched to steel and never a problem and they spin as easy at the ceramic 🤪 5)Clicking from rolling. Spokes got noisy from too much water intrusion. They were tight and not loose. Oil and solved. 3 of these clicking noise were caused by water.

@igvabe Год назад

check the quick link in your chain, after a while it deforms and starts making a clicking noise as it moves through the sprockets or derailleurs, that can easily be mistaken for the BB

@michaelmann6482 Год назад

I work as a bike mechanic. Twice in the last two weeks I’ve had a customer complain about a “creaky clicking noise” when they pedal. Both times it was the bottom bracket 😮 Don’t know if it was a coincidence but both were aluminum bikes with cartridge bottom brackets that were loose a half or full turn on the drive side. Removed crank, snugged it up, noise gone.

@TheRst2001 Год назад

My mtb made a terrible sound when peddling under load on bikepack trip. Spent whole say with that sound , could be heard half a mile away. When I decided to just get a new groupset as the noise had forced my hand , I couldn't help notice g how loosely tightened the bb was , which I think 🤔 was the probable cause , but I will never know cause I replaced whole groupset and new bb 😅

@phila9288 Год назад

You are the best Phil!

@robertwaldren6206 Год назад

Good tip to start with anything that’s changed recently. My most recent noise was a nasty squeal, which turned out to be coming from a new set of rear derailleur pulley wheels. Derailleur hangar bolts can be a sneaky source of noise, along with chainring bolts.

@davidpeters4914 Год назад

It's never the bottom bracket...until it is! I've had issues with my Cannondale Supersix bottom bracket for years. The bottom bracket has been unpacked and cleaned so many times it hurts! I finally bought another bike with a threaded bottom bracket. Not the most economical fix, but a fix nonetheless!

@domtoa Год назад

Amazing !! Your video gives me the authorization to slap my bike mates when they complain they have a creaky bottom bracket !

@dominicrivers6606 5 часов назад

Yesterday it was the BB! The nice mechanics in the Subaru dealership way out in the Japanese countryside leant me some tools and grease and in 15 minutes I was back on the road.

@sawyerburnett8319 2 месяца назад

my seat post seems to be creaking. After this highly educational video, I feel empowered to identify and fix the issue!

@alainpfammatter8224 Год назад

Great video. I can garantee you this video will be very successful 😉

@jimbrittain402 Год назад

Had a bottom bracket noise on every crank revolution. Tightened up the springs in the pedals where the cleats engaged, and the bottom bracket was miraculously fixed. Another bottom bracket noise was fixed by tightening a crank fixing bolt. A third BB noise was fixed by the bolts holding the handlebar to the stem. It amazes me how far those bottom bracket noises can extend throughout the bike.

@fancytyme Год назад

I'm very happy for your good fortune in only having one true creaking bottom bracket in your experience. From my perspective, almost entirely vintage with some extremely wack threadings, sometimes, yeah, it is the bottom bracket. That said, you don't exactly need a microscope to look down and see a French fixed cup backing off of the shell with 1.5mm of threads exposed.

@freeksmulders4245 Год назад

If it's a Cannondale, it's the BB!!!

@rgpeters Год назад

If only more bike mechs and bike shops would actually know this hahahahaha for a long time I thought it was my bottom bracket only to find out it was my Fulgrum hubs, now I just clean & re-lube my bottom bracket for less friction, great video!

@cycling2005 Год назад

If You are still riding a "real" bike with rim brakes, the quick release skewers can make a clicking noise if not lightly greased. It usually happens when standing in a hard climb. Also if all else fails, take your rear wheel out and remove the derailleur hanger and grease the interface between hanger and frame.

@dougadama 5 месяцев назад

I tore down and rebuilt my mtb twice last spring to resolve a nasty creak. Replaced the BB and frame bearings and it still creaked. Turned out to be pedal bearings on right pedal. Live and learn…

@paulhiggins9492 Год назад

Mine was cracked glasses, I had to board them up, also I cycled through a rough neighborhood all the windows were boarded up, the window cleaners had sanders…..the pub was so rough even the piano had a bandage on the leg, and the first question in the pub quiz was , who you looking at. There’s millions more just mail me……

@Timonius93 Год назад

Good diagnosing tips. Only happens while standing up does not necessarily mean handlebars or headset. I once had a clicking noise only when standing up and it was my Shimano hollowtech crankset being cracked.

@bpoldauf Год назад

"slap yourself, it's not bottom bracket" made me laugh, great video

@owenschwartz000 Год назад

Mine was the front derailleur clamp on the down tube….after reinstalling the bottom bracket multiple times 😂. Grit between clamp and tube after a wet ride. Thanks Phil!

@danreynolds1142 Год назад

Like the nylon tape tip, that one is new to me. Entertaining as always, thanks 😊

@glenspringle7337 Год назад

Actually Teflon... but if it does the job, no one cares!

@glenspringle7337 Год назад

Another trick... Natural gas tape (usually yellow) is thicker than plumbers tape and you don't need to do as many wraps....Learned that from an Ingersol-Rand compressor installer

@Hangingofgiants Год назад

I had a bb30 bottom bracket that was always noisy. In fact it was the bb30 to 24mm conversion cups that creaked. Just required frequent cleaning and the cranks torqued properly. That bottom bracket took a beating over the years from winter commuting/cx/road rides by multiple owners. Never once was it actually the bottom bracket.

@rl-cx6kf 23 дня назад

lmao my bike is in the shop (guess what the problem is) But it was definitely echoing throughout my entire bike. Sometimes it's been a simple problem (& one time it was a cracked frame and there was NO warming - I was sailing along, quiet bike riding beautifully and then CRACK, WALKING HOME FOR THREE HOURS DRAGGING THIS BROKEN FRAME) But this was a very helpful video. In terms of the bottom bracket, I've had that once before this time - the repairperson, when I brought in my bike, was worried that the bottom bracket he had replaced on my last bike broke when I told him 'hey, you actually did a fantastic job, that's why I'm back with my new bike.' In the case of the first one, it wasn't just unlubricated, it had cracked - the part was cheap. So I'm looking forward to finally getting my bike back (it's been nine days in the shop and they're just two dudes serving like half a city) and until then, watching great videos like this.

@rodmatheson6953 Год назад

It may not be the bottom bracket, but sometimes it is a nearby. A loose chain ring or crank bolt will sound like it’s coming from the bottom bracket.

@cruggles61 Год назад

Bought a 2007 Steel Axiom 2 years ago. Was told it was kept in an attic for 15 years, had less than 300 miles on it. Inspection (drive chain wear, paint,…) confirmed. After about 500 miles, there was a “creak” on every strong downstroke. It sounded like the bottom bracket. So I googled it and found, of course, that it’s “Never the bottom bracket”. Did all the non-BB suggestions here, and more! The creak persisted. FINALLY, I opened the threaded Ultegra BB, noted some dried up thread-lock? Old grease? Who knows. So I cleaned the threads, added a small dab of grease, torqued it down, and, lo-n-behold,… wait for it… It was the… Bottom bracket! It was fun doing all the maintenance! I learned a lot, bought a bunch of tools, got a well-serviced, creak-free bike that I absolutely love to ride! And learned that I should not trust everything on the internet! So for the sake of future ChatGPT hashes, sometimes it *is* the Bottom Bracket.

@mrwhiteshorts Год назад

@6:27 once when i had a Cervelo S3 set up for hill climbing, it was the rear hub creaking against the frame, due, in part, to installing the wheel dry, and not quite torquing the Tune skewer quite enough. Once i put carbon assembly paste around the hub and inside the frame dropouts.. problem solved :D Cheers Phil for the video.m

@blubaughmr Год назад

On my Cannondale CAAD-12 (BB30)... it's the headset! It's impossible to adjust the headset for no binding and no play in all positions, so the bearings aren't parallel. Great quality control! My daily driver Surly Crosscheck commuter bike DID get a bottom bracket creak, on an ISO bottom bracket. Tightened it up 1/8 turn and done. That was after going through stem, crank bolts, chainring bolts, and pretty much everything BUT the bottom bracket.

@billszymanski4844 5 дней назад

my worst creak....it wasn't my bottom bracket. it was spokes rubbing at the cross point when under load! tight the spokes and lube the cross point. Yours was a great video. from others on the interweb, I have a list of 12 things to check. I will now move bb to the bottom of the list where it belongs.

@fit4ride Год назад

Press Fit BBs creak like mad - especially BB90. Glad to see bike frames going back to threaded - much better

@vini20900 Год назад

no. no they don't. it's never the bottom bracket

@stephenchu1115 Год назад

I've solved all my bike creaking issues 100% of the time just by simply adding this one step that Phil didn't mention. If you have a creak and can't find it after all of Phil's steps, then the last and final step is to buy a new bike. Simple.

@JoeGunawanfotosiamo Год назад

it's better to buy a new bike then a new bottom bracket!

@bombasticbissell Год назад

One time I thought it was the BB. It was loose chainring bolts. And some grime had worked its way between the chainring and the crank arm. Removed the crank arm. Removed all the chainring bolts. Cleaned and greased all contact points. Reassembled. Noise gone.

@schaeferdev Год назад

For me it was actually the upper fabric on my shoes (s-works torch), I figured that out after I replaced the Bottom Bracket. Wish your video was out two weeks ago :)

@ruiloureiro3167 Год назад

Ouch!!😅

@Outsideville Год назад

Yeah, my Shimano XC shoes are also noisy. Pleather against pleather

@elektronautno Год назад

With the bike on the trainer, I had my wife crawl around to pinpoint where the sound came from. She triangulated it down to the bottom bracket. It was a squeaky dry jockey wheel.

@Daniel-ng8fi Год назад

I don't have a trainer, so I made my gf run along next to me stooped over until she could tell me where it was coming from. She too said it was coming from the bottom bracket. It was one of the suspension bolts.

@elialexander-tanner5784 Год назад

I love this! I know it's not my bottom bracket, I think it's my seatpost!

@colinricketts1415 Год назад

I tried ignoring the bottom bracket as the cause of the creaking on the bike absolutely because you told me it wouldn't be the cause of the noise.. Gave in today, took the cranks off and the bottom bracket was a mess. I'm blaming you entirely for my problems, I'd have fixed the bike 2 weeks ago if I hadn't seen this video!

@nicholasjones6721 Год назад

Just had a creak and needed to replace… my bottom bracket… but at least 19 times out of 20 it is NOT the BB. Loved the coasting tip.

@Accounting4Cycling Год назад

I was using a wheel on smart trainer after installing new 28mm tires. The tires were the same brand as I had on before, same "28mm" size, but suddenly I was getting this ridiculous rubbing noise (very distinct from the usual wheel to drum noise of a wheel on trainer). I couldn't figure it out and it seemed like it got getter at lower speeds, completely gone when I was off the bike turning the pedal, and only occasionally during hard sprints with the old tire back on. Turns out, the Specialized Roubaix Sport 28mm and Specialized Roubaix Pro 28mm tires are just different enough in height that if I was a few pounds heavier getting on the bike that ride or putting down a lot of power, the new Pro tires were rubbing against the trainer mat and buring a tread line into it! I only "solved" it by recording a ride with my GoPro pointed right at the rear wheel and trainer, with the rear third in view and could see the tire rubbing against the training mat from shortly after getting on the bike (after the whole setup settled more into the mat and low-pile carpet). I had a few sprint in the mix and it clearly showed that it way my new tires buring through the training mat into the carpet beneath that was the problem! That ride proved it, as the sprint sessions had burned such a clearly visibile "slice" into the mat that you couldn't miss it! Now I use a direct drive trainer and have lost a significant amount of weight, so the burning rubber during indoor rides is no longer an issue! I ignored the forums stating it had to be the bottom bracket because I was far to poor and didn't have the correct tool to start troubleshooting like!

@markreams3192 Год назад

Hate creaks! First; avoid press fit bottom brackets! It’s almost always the bottom bracket. The second most likely source are the pedals. I’ve had creaks where I’ve taken out, cleaned and lubed and torqued every bolt on the bike! The creak remained. I took the bottom bracket out, clean, greased and torqued the BB. No more creak. Hint; don’t use regular grease on threaded and press fit items. Use Morgan Blue aqua proof paste. This stuff was developed originally for marine use and has been adopted by many pro mechanics for assembling bikes. Canyon recommends it for assembling their bottom brackets. It maintains it viscosity in a very wide range of temperatures and is absolutely water proof. It will not wash out like conventional grease or anti seize compound. By the way, creaks are usually caused by a reaction between dissimilar metals called galvanic corrosion. You only have a very small area of this corrosion to make your bike creak like your grandmother’s knees! Grease provides a barrier between metals to hopefully stop them from reacting to each other. Morgan blue aqua proof paste is also marketed by Kogel under their name. It’s nicknamed the bottom bracket silencer. It’s also safe to use on carbon. Do not use it on bearings. It’s not a bearing grease! Sorry Phil. I guess my experiences have been different than yours. Good video. It sucks when we spend thousands of dollars on a bike (or at least I spend thousands of dollars on bikes😂)and it makes a lot of unwanted noise!

@Gisae Год назад

I've had the clicking noise now on 4 of my bikes. 2 I haven't taken the time yet to properly investigate (however, I do have spare bottom brackets ready). 1 sounded like the bottom bracket but upon replacing the bottom bracket I found out it was the pedal. And the last one was *drumroll* the bottom bracket!

@clinlashway9147 Год назад

Took me some time to track a noise down to a frame pump that was coming apart. Seat rails a given. I just end up gluing them in place with JB Weld. Had an odd popping sound once. I eventually pulled the seat tube out, cleaned and put carbon paste on. Took care of that.

@smachsimo Год назад

Definitely had BB creaks and solve them but fully agree to check everything else first.

@bombasticbissell Год назад

Oh, I forgot about the other time it was the BB. 1983, broken bearing in the BB somewhere in Montana. The next bike shop was in Bismark North Dakota, 300+ miles away. I ground that BB into little tiny metal fragments before I could replace it. That one made some noise.

@TheMattist Год назад

I had a mystery creak that I couldn't figure out, turned out to be the spoke nipples and spoke holes were making noise after I went through a shallow flood and let it dry out. Some lube & GT85 worked a treat. Bike shop told me I needed new wheels.

@bacarter Год назад

The other big culprit I've run into is slightly loose crank bolts.

@David-xe8hc Год назад

You're spot on, I took the bike to a mechanic cause I thought the noise was coming from the the bottom bracket. Eight months later after many failures, a new mechanic managed to figure out the noise in fact was produced by the hub in the rear wheel, not the bottom bracket, the hub unfortunately was incorrectly installed by a previous mechanic. Apparently a recurrent problem with this type of wheels, hence the new mechanic knew about it.

@worstretirementever Год назад

Let me guess…enve?

@David-xe8hc Год назад

@@worstretirementever Nope ... Vision wheels, but it might just be many mechanics don't fallow factory instructions .... for the Vision hubs the rims are different size in the front vs the back.

@SteveT__001 Год назад

If you have rim brakes, check the rear wheel quick release skewer and tighten it. A very common cause of creak that sounds like the BB. Grease it if you can.

@berserk1440 Год назад

Thank you Phill. I followed your Sherlock Holmes steps and find that my rear wheel quick release was echoing through the frame which made me think the bb was dirty, but it was not.

@worstretirementever Год назад

Love it!

@michaelruelle5508 Год назад

Strangest creak I ever got was NOT the bottom bracket but was coming from that area. Turned out it was the chainring bolts were slightly loose.

@L4ch74n Год назад

Yup, never suspect those, until you find one or two of them or loose. Hate this.

@mennovanderveldt4818 8 месяцев назад

You are right, i had a most irritatating sound. Id did all thise things you mentioned. Pedalling with one leg, swap out pedals, seat tube and so on. Finally took it to the bike mechanic and... it wasn't the bottom bracket, which i finally thought. No it was a little dirt in the cassette body 😂

@jmbainbridge1 2 дня назад

Greased the pedal bearings. Changed the pedals. Changed the seat post. Changed the saddle. Added grease to the bottom bracket. It was the bottom bracket!

@mogulmayhem Год назад

Great hat.

@dewindoethdwl2798 6 дней назад

My go to is the crank to bb connection. After that it’s pedals or saddle. Carbon frames are brilliant at making noises appear somewhere well away from the source😂

@krausejonathan Год назад

Chainring bolts, so often. Remove grease and torque. I keep extras in my small parts bin to save friend’s creaky bikes. The other funny one is mechanical FDs where the cable is too long and sticks out and to the side, where it contacts the crank arm to make a tiny click on every pedal rotation.

@biedawo Год назад

Nice hat. seat post was most common for me; cracked bottle cage the most recent.

@MichaelTabolsky Год назад

Crossed spokes that rub, chainring bolts that creak, qrs... oh, the laced shoes... the lace hitting the crank arm was the best

@nathanwforrest Год назад

Dropper post on an MTB... It only made noise when the post was almost topped out (it would stop slightly short of full extension sometimes.) Took weeks to figure it out.

@Big2Planker Год назад

Last year, creak-a-palooza! Canyon Grail - rear hub bearings were SHOT. Storck Aernario - rear freewheel body was DRY - man, did THAT make a racket! All solved now though..., in both cases, it WASN'T THE BOTTOM BRACKET. Thanks Phil!

@stevetee4145 Год назад

It was my bb! On my mtb I have a square taper bb and the bearings were toast. I could feel and hear a click on the power stroke on one crank. New bb solved it.

@danfuerthgillis4483 9 месяцев назад

#1 BB creaking is not the bottom bracket it is actually the Crank shaft that has been worn down a few micro mm by the bearings location. Look for wear on the area that has the bearings on top of it. If your crank shaft has these areas worn down you will get creaking specially when are in slower speeds and on the small ring. If your crankshaft feels like it is too easy to go in through the Bottom Bracket then you will eventually get creaks, make sure the shaft has some light grease on it and that it is tight when going in. Had this happen recently and since I assemble bikes and repair them after 2 bottom brackets swapped out to test this, it was indeed the Shimano Crankset shaft that was the problem. After a Crank set swap no more noises even with the old Bottom bracket.

@earthycup Год назад

One time it was my bottom bracket but I wouldnt call that a creak. It was like loose ball bearing in a washing machine 😳

@Driver8takeabreak Год назад

I second the chain checker tool. I got the cheapest one from Park ($8 I think?) and it is incredible how long my cassettes last now. For almost two decades I used to wait way too long to change my chain and then I would have to replace the chain AND the cassette. I'm on probably my 5th or 6th chain on the same original cassette from a bike I got new 4 years ago thanks to the chain checker.

@markholder4054 Год назад

Shimano R8000 front derailleur was out by 1mm. Right crank arm was touching the derailleur on each up stroke.

@stevenleith7237 Год назад

Phil ..... OMFG Thank you damm TCR ISP. Pulled out, wiped down, new paste, and a torqued down, CREAKING gone ARRRGGGHHHHHH !!!!!!!!!!!!!!!! You sir are the Cookie Monster 🎉

@worstretirementever Год назад

Haha happy for you!

@borasumer Год назад

That is true, you take the bike to your local bike shop, and they just replace the BB and the cream goes away. But instead they could have just clean the bb and reapply the lubricant, but ofc that would cost them a BB sell...

@mecoollearoyd Год назад

#1 Strange noise was the front wheel. The spokes were creaking where they pass through the eyes in the hub. #2 Strange creaking when cornering on an old chrome-moly bike. When I undid the front wheel to investigate the left hand leg of the fork fell off! It was broken inside the crown of the brazed lug.

@bengt_axle Год назад

Creaks going up a hill on my steel BSA bike were coming from aluminium spoke nipples corroding against the aluminium rim. After 12 years, I should have known. When added some lubricant to the nipple rim interface, it fixed the problem. It is amazing how the noise did resonate as if it were coming from the BB, especially when climbing out of the saddle. Decades ago, I had an Asia-made Bianchi (Tange or Ishiwata tubing) with a steel crown fork and the creak was caused by a crack that ran right through the crown lugs (yes, both layers of the steel). I never looked there because I thought it was impossible for it to break. During the manufacturing of this fork, it is heated red hot to do the brazing and this what likely made the steel more brittle. I was only 16 at the time, and didn't realize that Bianchi should have replaced it, even though my warranty had expired.