Тёмный

Creaking Noise While Turning in Your Car or Truck? Detect Stiff or Frozen Ball Joints and Tie Rods 

1A Auto: Repair Tips & Secrets Only Mechanics Know
Подписаться 2,4 млн
Просмотров 705 тыс.
50% 1

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/184/dB/tie-rods-and-...
Do you hear a creaking noise while turning the wheel in your car or truck? In this video, Sue has tips to help you detect stiff or frozen ball joints and tie rods! For most vehicles, outer tie rods and ball joints both have flexible ball in socket joints. The joints are packed with grease and covered with rubber boots. Over time, or if a boot rips or tears, water and debris can get inside the joint, make it stick, and even cause rust. These joints will seize up, or dry up, causing lots of vibrations and noise. Check out this video to learn how to identify and solve the noises from bad joints!
0:00 Creaking Noise While Turning in Your Car or Truck? Detect Stiff or Frozen Ball Joints and Tie Rods
0:45 Manually turn the front wheels while off the ground to locate the noise
1:40 You may need to remove the tie rod to isolate the noise
3:28 A comparison of stiff and normal tie rod joints
5:15 Some ball joint noises only appear when the wheels are on the ground
6:53 SUBSCRIBE! | Shop 1AAuto.com Link Below!
🔧 List of tools used:
• Pry Bar 1aau.to/of3/1AXAA00020
• Ratchet 1aau.to/ow4/1AXAA00016
• Complete Hex Socket Set
• Floor Jack 1aau.to/ogy/1AXAA00068
• Hammer 1aau.to/ofX/1AXAA00091
• Jack Stands 1aau.to/ofZ/1AXAA00065
• Wheel Chocks
Subscribe: / @1aauto
Check out our playlist:
Driveway Diagnostics!: • Driveway Diagnostics!
For More Info visit us at 1aau.to/h/duq/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

16 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 187   
@1AAuto
@1AAuto 2 года назад
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money
@impotentdog
@impotentdog Год назад
. 2qtcgw. Tou you
@cowsongs
@cowsongs 4 месяца назад
This is the second video I have watched by her. I am impressed. She speaks slowly, clearly, and accurately, and explains the theory and physics behind her repairs. She also has good manners and is sociable which I cannot overemphasize enough. So many of the people who do car repair videos cuss at me and mouth off like street thugs while they are supposedly showing me how to fix a car. This woman is a breath of fresh air.
@1AAuto
@1AAuto 4 месяца назад
+@cowsongs Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@mikejerrett7354
@mikejerrett7354 2 года назад
Yes there's nothing I love more than getting under my truck to service it. For how long it takes it will save a ton of frustration in the future. Great video.
@Rtb323
@Rtb323 Год назад
Until u strip a nut or a bolt and it’s off to the mechanics to get it off 🤣🤣 god damn I was replacing my tie rod ends today and my passenger side one was fairly easy until I got to my driver side the Nut that holds the tie rod onto the the steering arm was siezed on there and I tried for an hour until I stripped it no wd40 no PB blaster couldn’t do it … now it’s stuck and stripped .. not looking good so I have to go to the mechanics for them to do it sadly. I couldn’t get it off… gotta get an alignment as well.. aside from that you do save a lot of money Doing ur own mainetnce. I’ve done all the mainetnce on my truck.. it feels good lol
@Keyfloatz
@Keyfloatz 2 года назад
Just purchased front end kit from your store: upper,lower ball joints, and tie rod ends for my Lexus GS 300. All the great videos on how to fix things has really helped me through the years. I bought them all at a great price they are scheduled to arrive Friday the 15. Hopeful they get here that quick. Thank you for all you do for us out here!
@Druski.
@Druski. Год назад
How quick did they come? Quality parts?
@kevinwells4888
@kevinwells4888 Год назад
This lady is cool. More videos by this lady!
@smiletime
@smiletime 2 месяца назад
Thank you for this clear, concise, thorough explanation and demo video!!!🙌🏼
@arazabdulrahman188
@arazabdulrahman188 2 года назад
I have a car repair workshop in Kurdistan. I have received a lot of information from your videos. Thank you
@fredguerra4917
@fredguerra4917 4 месяца назад
She is cool and very knowledgeable. Excellent human skills. A very important aspect of the industry that is often overlooked.
@shokmail3875
@shokmail3875 Год назад
Good gravy that was a brilliant explanation and demo. Thank you for that and PLEASE continue to produce this quality of videos. The internet needs you!! lol
@rebekahrogers4031
@rebekahrogers4031 Год назад
You are such a good teacher! I really appreciate this video!
@hs5942
@hs5942 3 месяца назад
only if every car repair video was like her
@Hosstyle.
@Hosstyle. 9 месяцев назад
Great Video. Thnx. At the 5 min mark you took the words right out of my mouth.!!! I took my sons car for an oil change (LOF) to Midas in Orangeville, Ontario, trying to support a local business, & they did Not grease the car. The car is older, but new to us. I went back to inform them that they had missed it, & they blamed me for not telling them. I didn't even want any resolve, it was more an "FYI" for them to tell their lube tech. Needless to say they lost a customer that day.
@NXT_LVL
@NXT_LVL Год назад
Started hearing that noise when I was at full lock turning to back into my drive... Now I know it's one of those two for sure. Being the original suspension components, I'll put money on both.
@jessevargas3289
@jessevargas3289 Год назад
Nice vid. I noticed the same exact noise yesterday morning and checked to see my mechanic didn’t replace my drivers side tie rod end when front end work was done 😅
@gregariouswoodworks1270
@gregariouswoodworks1270 Год назад
You hit it right on the ball..joint that is..I recently did my own front end full suspension and had no idea about the greasing. A few days later I hear this exact sound and realized I never put any grease so I added some..the sound is back a month later and I'm wondering if I destroyed the joint as the damage was already done.
@cpdesigncad2018
@cpdesigncad2018 3 месяца назад
Impressive I love working on my car but I'm not as good as you. Thank you for this video my Honda 2013 is making this exact noise and all 3 men mechanics that have supposadly checked it have been all over the place with what could be the problem go figure lol Young Lady You Rock!
@garnellwalls3721
@garnellwalls3721 2 года назад
Love watching your videos. Please keep them coming.
@denisesantiago7426
@denisesantiago7426 5 месяцев назад
Thank you so much for this! Excellent video and explanation! 😅I was wondering what the noise that just started yesterday on my charger . Now I know. You’re a life saver!
@propertyservices1
@propertyservices1 Год назад
Very well done video. From the host to the editing.
@wannabetrucker7475
@wannabetrucker7475 2 года назад
Love the diagnostics. ❤️
@justinkennedy5068
@justinkennedy5068 Год назад
This lady is very knowledgeable
@fnkmstrfisk
@fnkmstrfisk 11 месяцев назад
Great video! Thank you for helping me diagnose where the problem is instead of me just replacing stuff 😅
@manueltuset
@manueltuset Год назад
Your exposition is very clear. Congratulations from Guayaquil, Ecuador Question: When I turn the steering wheel of my 2012 Chevy Tahoe, the steering sounds like a zipper. what could be the damage?
@zedizdead
@zedizdead 6 месяцев назад
excellent video! differently that the endless "alike" videos on utube (many doesn't even has a sample of the noise that gets talked about), your walk through is great! thanks
@ericgriffin8200
@ericgriffin8200 Год назад
Awesome video, great explanations, great detail I have been fighting front end steering and suspension issues for a year this is the best most helpful video I have found. Thank you
@1AAuto
@1AAuto Год назад
+eric griffin Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
@tundrav8georgia
@tundrav8georgia 3 месяца назад
I love listening to this lady she is great .
@Rickxx881
@Rickxx881 2 года назад
This helpful. I have the same problem right now.
@jshcarmonakc
@jshcarmonakc 4 месяца назад
Very educational learning experience, thank you so much for this.
@normsgonz4782
@normsgonz4782 8 месяцев назад
My 2016 Honda making this noise I thought it was the axle when moving left to right. 😂thanks for clarifying great video
@alvarado99_ythtx63
@alvarado99_ythtx63 Год назад
Amazing video thanks for explaining it so well. Gods work in this channel.
@JoshySaucy
@JoshySaucy 7 месяцев назад
Thank you for posting this and giving me peace of mind
@boricuadrive7461
@boricuadrive7461 5 месяцев назад
Very useful lady mechanic! 🧑‍🔧 Even with sound effects like @ 3:57 it’s just perfect… 👏🏼
@sleekitwan
@sleekitwan 11 дней назад
She’s really pretty good. Hard to say why, but I listened better and she pre-empted questions that raised themselves during the job. Yes, fair to say if the part is NEW and stiff, that’s good. If it’s old and stiff, then it’s freezing/rust/dryzabone. Now, there’s a couple of points about these sort of jobs. If you are using a hammer, this mechanic did it all right, you whack the side of the part the balljoint goes into, first. It ‘cracks’ the gluing effect that rust has. If you have to hammer the balljoint out, then apart from anything else, pre-lube a day or week before, use a small wooden baton atop the part-screwed-on nut you;ve positioned, get someone else to hold a scissor jack under the thing (hub) at the point where you are hammering. Use a big hammer. Decent lump hammer minimum. The idea is, not to tap-tap the metal of the nut, which is liable to deform with that force, yet NOT actually enough to split the balljoint apart. A fewer, larger bashes with a bigger hammer and an intermediate wooden batten, or even a steel chisel/bar, supplies the force but without the distortion of the nut etc being as bad. Just got myself an impact driver, specifically for those jobs where trying to stop the balljoint turning is an awkward thing without three arms. Impact driving allows the luxury of the part undoing before the balljoint or whatever, spins it seems. Great vid, just a very personable mechanic, easy to watch and listen, it’s a relaxed delivery. Good work!
@hbofbyu1
@hbofbyu1 22 дня назад
Very well done! Excellent video
@lsaacadeniji2562
@lsaacadeniji2562 Год назад
So helpful. Thank you.
@MrOrangeonion
@MrOrangeonion Год назад
I would love a playlist on one particuliar car showing everything you guys know. If anyone has such a thing please reply with link or words. Thanks And this is such a great video.
@Morrisontravels
@Morrisontravels Год назад
Thank you.
@ImShocko
@ImShocko Год назад
Awesome thank you so much! Massive help to me.
@raystantz4440
@raystantz4440 8 месяцев назад
Excellent instructions!!!
@Banditt42
@Banditt42 2 года назад
Great video thank you
@whysoserious6456
@whysoserious6456 9 дней назад
Thanks
@arazabdulrahman188
@arazabdulrahman188 2 года назад
Thanks 😊
@machineman6498
@machineman6498 11 месяцев назад
Thank you for making this
@rockyrocket7187
@rockyrocket7187 8 месяцев назад
Thank you
@gelfandothea
@gelfandothea Год назад
Exactly what I was looking for.
@ericmaldonado6374
@ericmaldonado6374 2 месяца назад
Great video Lady 👏👏
@krissyk9767
@krissyk9767 11 месяцев назад
Thanks for the video. My car had been making a very similar noise for several months now. I took it to a mechanic for a service and asked them to check the noise. They told me they couldnt find anything wrong !?? Its still making the noise. I am going to try another mechanic and show them this video !
@1AAuto
@1AAuto 11 месяцев назад
+Krissy K Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@miltonvelez8943
@miltonvelez8943 Год назад
your videos are the the best!!!
@AndyNav1
@AndyNav1 Год назад
Thank you for the video. Do the tires have to be hard to turn by hand on all wheel drive cars as you showed on the beginning of this video?
@abdullahmatboli9493
@abdullahmatboli9493 4 месяца назад
thank you for an informative video .
@springbean19
@springbean19 4 месяца назад
many thanks
@jasondoolin6476
@jasondoolin6476 Год назад
Excellent video!
@georgeandreou1027
@georgeandreou1027 4 месяца назад
Very good Mechanic to 100%. in Practice and Theory from Montreal, Canada
@shouldihangmyself
@shouldihangmyself Год назад
Amazing video a lot of information 👍
@minttyfreshh1650
@minttyfreshh1650 6 месяцев назад
I have the exact noise when turning my steering wheel ever so slightly , and I was told it was the struts . So Monday they are changing both front struts ..
@Pinkielover
@Pinkielover 8 месяцев назад
change as soon as possible because if that ball joint fails and breaks out of the socket. Somehow you'll have no control and your wheel would be completely loose from the steering... also, putting it off of damage other parts on my car like tires , but yeah, your upper control arms can suffer even more so if you don't replace them in time.. at least on my car
@christianmata1888
@christianmata1888 Год назад
Thank you good shit
@user-vd7nf1uq8q
@user-vd7nf1uq8q 3 месяца назад
I had a Honda Accord which I just installed new rear springs and ended up with a creaking noise on the driver rear area. It turned out I had over tightened a few bolts back which caused the creak. I bought a new torque wrench and tightened all things back there to spec and no more noise.
@dannykeller6316
@dannykeller6316 7 месяцев назад
Great job!
@santiagoperez8108
@santiagoperez8108 6 месяцев назад
Muy bueno y ameno el vídeo.
@GuardianApe
@GuardianApe 2 года назад
You guys are the best
@TonicofSonic
@TonicofSonic 2 года назад
I asked a toyota mechanic friend what "lube chassis" means on my invoices, and he burst out laughing. "No-one ever lubes anything" he responded.
@webguy943
@webguy943 2 года назад
And they charge u $250.
@Way2EasyDIY
@Way2EasyDIY Год назад
I lube women chassis
@philltafolla
@philltafolla Год назад
@@Way2EasyDIY me 3 😮😅😊
@NXT_LVL
@NXT_LVL Год назад
That's why it's been made cheaper to buy a whole new part, rather than pay them to replace bushings.
@nopulpapple991
@nopulpapple991 Год назад
Just got my tie rods front and back replace now everything grinds
@chrisfaqqu7220
@chrisfaqqu7220 3 месяца назад
Thank you for the vid, I’ll be checking for this exact sound this week!
@kingtitan2051
@kingtitan2051 2 месяца назад
Install a grease fitting on both tie rod ends..
@robertsims6136
@robertsims6136 8 месяцев назад
GOOD VIDEO. TY
@sn0m0be
@sn0m0be Год назад
You're great! Like for real. Keep it up!
@reiannaidoo
@reiannaidoo Год назад
I liked the bloopers.
@dajam9035
@dajam9035 Год назад
Thanks. I wish I saw this video before I went out and bought a freaking left cv joint thinking "Well it it worked for the passenger side, then it's going to work for the driver side. And I bought it based on that smh. There was nothing wrong with my old cv left cv joint. My disappointment when I struggled to get out the left side only to see it in good condition 😟😕
@backtonature433
@backtonature433 2 года назад
Awesome 👌
@carlosaquino8917
@carlosaquino8917 2 месяца назад
Thanks my does that noise. Iam going outside tomorrow morning and check it out. Thanks again.
@webguy943
@webguy943 2 года назад
So glad my ball joints are still good.
@ryans413
@ryans413 2 года назад
There not hard to change
@BobRizz.
@BobRizz. 2 года назад
I have a similar sound on my 2011 silverado but it's coming from the rear. I'm thinking it's my leaf springs but it just started happening out of the blue. Any ideas?
@whipple2721
@whipple2721 Год назад
Replacing any one of these parts will I need a front wheel alignment?
@shannonlotter
@shannonlotter 8 дней назад
I was supposed to leave on a road trip tomorrow from Pa to Tx, went to fill up with gas tonight and heard this noise coming from my mini cooper. Guess I won’t be leaving tomorrow 🥺
@BigDsHomestead
@BigDsHomestead Год назад
I am.getting the same/similiar noise ever sice I i stalled new tie rod ends that I bought from your company. It never mad this noise before. My brother checked ball joints and they are good and tight.
@maky4653
@maky4653 Год назад
I hate to say it but I'm going through the same thing with my 2nd pair of tie rod ends from 1a. I appreciate their video but I want more so appreciate good lasting parts..
@LucasKellis
@LucasKellis 10 месяцев назад
Man, if I had a lift I'd do everything myself. But It can be hard doing suspension work on your own driveway without professional tools.... I've done it before but boy does it take all day for a simple fix.
@BillsCountrysideAdventures
@BillsCountrysideAdventures Год назад
Great video :)
@susanlloyd3515
@susanlloyd3515 2 года назад
Question? Fwd Dodge Avenger. Passes standard testing for tie rods. However, if the steering wheel is slowly moved or rocked back and forth, it's only then that the issues with inner tied rods can be detected (can feel it when hand is on it and also hear it). Any ideas why?
@Heartadia
@Heartadia 2 месяца назад
she is AMAZING.
@CaptainCJ97
@CaptainCJ97 8 месяцев назад
Doing the lords work
@dahlon6618
@dahlon6618 Год назад
I have a similar noise and sounds like binding up but I replace tie rod ends n ball joint and the noise came out of nowhere It prevents me from accelerating in a turn but if I roll into a turn it doesn’t sound bonded up
@akuadoku5031
@akuadoku5031 3 месяца назад
This was good info. Could you add captions to the videos? If possible.
@HotRod-wv4vm
@HotRod-wv4vm 2 года назад
Thanks should you replace both inner and outer tie rods as same time
@massdasaag
@massdasaag 9 месяцев назад
Will this throw codes? Like traction control / stabilitrak
@MICHEAL_SCOTTT
@MICHEAL_SCOTTT 2 месяца назад
You are awesome
@apmorales7187
@apmorales7187 2 года назад
Wow
@reeree0966
@reeree0966 Год назад
Hey I just got my tie rods (inner and outer) replaced and now I am struggling turning my steering wheel to the left. it's real hard and I can hear that same nose. but the right is fine but sometimes want to get stiff also. Took it back to the place who fixed my tie rods and they said give it a few days to loosen up. that the part might be frozen. Is that correct???
@abdulmoseley3443
@abdulmoseley3443 Год назад
you are great
@etztz123
@etztz123 10 месяцев назад
Great vid thx. I got something similar but it only does when weight on wheels. If wheels are on gravel or taken off when turning it doesnt make the noise. Only happens with wheels on floorn in hot weather. Not sure what to do.
@1AAuto
@1AAuto 10 месяцев назад
+pepper We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@SH-ni8sh
@SH-ni8sh Год назад
Same noise when im reversing and putting the trucki into forward gear and coming off of the brake. Not when turning the wheel though. Sounds link its in the rear. Any suggestions?
@Matman82100
@Matman82100 11 месяцев назад
Would one of these also make the stearing will stick when driving??
@jasonmarsden818
@jasonmarsden818 11 месяцев назад
I'm getting them creaking sounds but it's still easy to turn the wheels? Would this still be ball joints and tie rods? Also there's a little play in the wheel, it can rotate it about a cm forward and back with a clunking sound coming from somewhere closer to the engine. Please help
@tusharbapte7688
@tusharbapte7688 Год назад
Super 👌
@ziauddin7948
@ziauddin7948 10 месяцев назад
good tie rod issues exolanation #👍🇵🇰
@DaveSomething
@DaveSomething 2 года назад
every grease gun I've had has been a pos... but I do it anyway!
@Shooter_Mcgavin69
@Shooter_Mcgavin69 2 года назад
Milwake electric grease gun.
@ashleyhockenberry2187
@ashleyhockenberry2187 3 месяца назад
A+
@jaimedpcaus1
@jaimedpcaus1 4 месяца назад
It would be great if you showed how to grease those joints 😊
@elsiervo225
@elsiervo225 Год назад
hows the quality and durability from you products online?
@user-iz2tw1iq6l
@user-iz2tw1iq6l 13 дней назад
Will this make a noise at idle also
@user-kr2yf5yw6f
@user-kr2yf5yw6f 4 месяца назад
My 18 f150 does this but only when the brake are applied. Blkust out new pads amd rotors and greased the brake components
Далее
Зачем он туда залез?
00:25
Просмотров 63 тыс.
What Squeaking Ball Joints Sound Like
1:33
Просмотров 454 тыс.
Make Your Car QUIETER For $20!!!
8:07
Просмотров 617 тыс.
EQUIPAMENTOS TOP ? #moto  #motopeças
0:12
Просмотров 25 млн