Creality's K1 3D Printer is Here! | Unbox & First Use

Подписаться 58 тыс.

Просмотров 19 тыс.

50% 1

Unboxing, setting up, and Testing the Creality K1 Speedy 3D Printer to see how well it works vs existing printers. Is it faster? Does it produce better-quality prints? With precision engineering and advanced features, does the K1 Speedy offers exceptional results for models, prototypes, and artistic creations. In this video we'll determine if this printer is a game-changer in 3D printing and if it is perfect for beginners and experts alike.
Checkout my Bambu Lab P1P Unboxing and Comparison video on my unboxing channel: • Bambu Labs P1P Unboxin...
Creality Purchase link: tinyurl.com/bdfpktaz
Amazon Purchase Link: amzn.to/3JjWVHy
#creality #creality3d #3dprinting #crealityk1 #k1speedy #technology #tech #unboxingvideo #unboxing #review
◽️◽️◽️◽️◽️◽️
ADD ME ON...
INSTAGRAM: @clohofficial ► / clohofficial
TWITTER: @clohofficial ► / clohofficial
PATREON: / chrisloh
BLOG: clohofficial.com/
-----------
Video Gear I use:
📷 Sony a7iii - amzn.to/3CDzTJg
📷 Canon D80 - amzn.to/3bDkIOX
Audio Gear I use:
🎙️ Rode Wireless Go - amzn.to/3fXbX5S
🎙️ Samson G Track Pro - amzn.to/2WBF7Q6
🎙️ FiFine Wireless Microphone System - amzn.to/2zFIsoq
🎙️ FiFine K678 Microphone - www.amazon.com/dp/B085WRN1VD?
Lighting Gear I use:
Graphy StudioFX Box Lights - amzn.to/3cFfmnR
Neewer Studio Lighting - amzn.to/3bAYFs7
All Equipment and Editing Equipment that I use:
kit.co/clohoffical/my-filming
-----------
Music Track by:
Main: From RU-vid Library
-----------
⬇️ WATCH MORE VIDEOS ⬇️
/ cloh761
/ @everyday-unboxing

Наука

Опубликовано:

27 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@herbertroxas Год назад

Nice vid! Good Job!

@av0wvos Год назад

This is a good introduction/ unboxing. Thanks! I prefer pre-film so I can watch it at 2x speed.

@ChrisLoh Год назад

Thanks!

@3DPUK-TECH-CHANNEL 11 месяцев назад

great review

@gman9543 Год назад

Also curious to see how much replacement parts are and how available they are.

@Liberty4Ever Год назад

28:20 - You shouldn't touch the printer (or the table) when the printer is doing the input shaping tests. The front panel warns you about this. Shaking the table or printer will result in an incorrect input shaping calibration.

@Mr__seed Год назад

can you share how you fixed the extrusion issue cus im facing the same problem

@zwhitcomb Год назад

Wow. Really would have helped if you read up a bit on the features before doing the unboxing. I had to turn it off when you said you didn't know what input shaping means... 😂

@BalkanBiker Год назад

The price in Sweden for Bambu Lab X1 Carbon is on a whole different level. It's €1500 for the AMS version. P1P is €900. K1 is about €600-650.

@ChrisLoh Год назад

Wow. That is a lot more expensive. Hopefully it gets cheaper over time.

@AndrewAHayes Год назад

@@ChrisLoh Yeah but their earnings are also much higher than other countries.

@MisterkeTube Год назад

You asked for opinions, so ... I never watch live streams. They just waste too much of my valuable time and I honestly hate that it seems to be the fashion of the moment. Sometimes I click one by accident, notice it would take more than an hour of my time and then trash it, giving it a "don't like". So please, DO NOT make live streams or if you do, at least ensure you also provide edited (or even scripted) videos for those of us that don't have all that time too waste.

@user-sb1vz9pv5y Год назад

You can't figure out how to fast forward a video? Not that difficult.

@MisterkeTube Год назад

@@user-sb1vz9pv5y I do fast-forward. All the way to the end by stopping playback. A good content provider knows how to condense all useful info in the smallest amount of time. And I'll stick to my time management and not waste time on live streams not bothering with that. You are free to do differently.

@DanielRobichaud Год назад

Orderd mine two days ago, with AI camera upgrade.. It's going to be my first 3D printer.. Fun to see your hydroponique tours in the background, because is my number one reason I both this printer.. AND at the same time have fun printing other objects and learn 3D modeling for some custom prints..

@ChrisLoh Год назад

Excellent. I actually bought the Bambu Labs X1C for that reason as well. To start printing my Hydroponic Towers using food-grade material. Since then I have just gotten addicted to 3D printing and have been buying more and more 3D printers. It also gives me the ability to start printing cool things like an Iron Man suit 😁

@graphguy Год назад

First? woe, congrats!

@brianschuster7855 Год назад

How did you order with the AI Camera upgrade, I am looking to order but have not seen that option, but would like it.

@mihai.simionica Год назад

Hello ? Why are you lying ? Have you even added the product in the cart ? Then you would have seen that there is no AI Camera upgrade :))

@fidelesquivel4974 6 месяцев назад

Why does my creality k13d printer keed moving the mold all over the plate , and does not build

@MyLionShare Год назад

My K1 cover alignes perfectly, if it doesn't there may be an issue with the frame, probably the shipper must have dropped the box hard.

@ChrisLoh Год назад

Thanks for the heads up and confirmation. Guess I’ll have to reach out to Creality

@Edward3DFX Год назад

perhaps the Lock switch on the print head should be a sprint loaded return to lock position - standard

@Liberty4Ever Год назад

It was a bit disappointing that you received a K1 with a sprung frame, based on the lid not fitting. I've watched several K1 videos and hadn't seen that problem. I assume someone dropped that printer on a corner, probably during shipping. Before I attempted to use the printer, I'd square the aluminum exoskeleton frame.

@TechyRodsWire Год назад

i like this printer had mine for a week or so! app is trash! but i dont use app

@user-ip6qh1cw1n Год назад

한국도 얼마전에 kc인증 완료후 정식 출시 됐습니다.

@iannicholls2790 Год назад

I'm in the same delivery situation as you were, still waiting for mine. Two weeks ago I got an e-mail "It's been dispatched" but no movement since then, not even a receipt from the delivery company.

@ChrisLoh Год назад

That sucks. If it's like my shipment, it will just show up on your doorstep suddenly. I also reached out to customer service and they were just as vague and said it would be shipped soon.

@atratafreshi9371 Год назад

Hi , I get my k1 today. And I have the same problem when printing benchy the filament doesn't extrude. What you do ? I am new in 3D printing.

@carloseduardogarciaibarra299 Год назад

34:30

@Liberty4Ever Год назад

I plan on getting a K1 Max in a few months, hopefully after the inevitable initial teething issues are resolved. I'm not in a hurry to be an early adopter. I doubt the lidar or camera will be implemented as useful features and are probably marketing features to click some Bambu Lab comparison checklists. I wish I could buy a K1 Max for $200 less without the camera or lidar.

@AndrewAHayes Год назад

If Creality fix any issue on a printer it will be a first for them!

@tabhinton6678 7 месяцев назад

Bought one. Printed a 100 mm part and it measures 99mm's. The holes wouldn't fit with the mating part. Finally got an email back from Creality. There is no method of calibrating this machine. So if you are printing a vase or a character it's great. If you need to print parts that have to fit together buy a different brand of printer

@ChrisLoh 7 месяцев назад

wow. that's wierd and something I havent experienced, but then again, im probably not printing anything as precise as you. Thanks for the heads up. Does that mean you have to adjust your print design to compensate at 101mm?

@JoakimMiller67 Год назад

I really think you should know about input shaping..

@ChrisLoh Год назад

Still new to 3D printing, however, I have figured out what it is and how it improves print quality.

@EPeltzer Год назад

Just seems like all the kinks have not been worked on these early K1s. Like they are beta units being rushed out to get on the market. On paper the K1 certainly seems to have the goods at a fair price so it's probably highest on my list at the moment. But I'm not getting a new machine for a few months. Just seems like this new generation of fast CoreXY machines is not quite shaken out yet with a lot of makers still just trying to enter the market.

@ItsDaPlumber Год назад

I got mine about 3 weeks ago!

@ChrisLoh Год назад

Excellent. How are you liking yours?

@ItsDaPlumber Год назад

@@ChrisLoh To be honest, I sold it 2 days later. I already have a Bambu and so when comparing it to that, Its a fail for me. First layer test didnt work. that was a sign for me. I also have a FLSun V400. That has its own issues.....

@MilkcafeCo Год назад

Is cura ur slicer ?

@MilkcafeCo Год назад

This printer isn’t on cura how did u get it too work

@ItsDaPlumber Год назад

@@MilkcafeCo I used the creality print software that came with the printer

@Bonjour-World Год назад

Mounting the spool on the back saves money but is one cost cutting measure that should have been scrapped.

@ChrisLoh Год назад

Yea. right now I have the printer backed up against a wall and it's a hassle to change out filament spools. Im trying to find and/or design a template that will allow me to mount the spool on the side or somewhere more convenient.

@Bonjour-World Год назад

@@ChrisLoh Think 'vertical integration' ... 1 Kg spools are 3 inches wide by 8 inch diameter. Construct a new top from Acrylic that increases the height by 12 inches. place bar mounted horizontal across the width 5 inches from the top and back. This allows room for at least 3 spools inside the new cover. Spool the filament from center of the front of the center spool. The cover would do double duty as a drying chamber as well ... just an idea :-)

@ChrisLoh Год назад

@@Bonjour-World Thanks. Sounds like a good plan, but will need to find some time to do it. I'll update if I can pull it off.

@NavySturmGewehr Год назад

Mine just showed up, it's running through the self checkup. I can't tell if it's actually on the network yet or not though.

@ChrisLoh Год назад

On the network selection screen if you wait a little it should say connected. The alternative is to download the Creality slicer and see if you can seee the printer

@NavySturmGewehr Год назад

@@ChrisLoh Thanks for the reply! This is my first 3d printer, sure does a nice job!

@tbip2001 Год назад

@@NavySturmGewehr hows your k1 doing? I’m on the fence about getting one. Ive havent had much luck with 3d printers previously . May sell my two bed slingers and get one of these. I’m really looking for a fuss free printer that doesnt require bed leveling

@NavySturmGewehr Год назад

@@tbip2001 I'm waiting on a replacement hot end from creality. My first 3d printer is down for two weeks. I erroronously made the assumption that creality really wanted to knock it out of the park with this printer. The quality of the prints and the easy of use as a new user is top notch. It really is. How many are having hot end failures and the fact that such an expensive machine is out of service in three days is a major put off, no matter how good creality's customer service is. Ideally, I don't want to find out if a company has good customer service or not.

@3D_Printing Год назад

Multi-Head?

@FlatulentlyJubilant Год назад

Just tried setting up my new K1 and it keeps failing during self inspection. It starts the self leveling part of the test then goes dark and reboots. Starting to feel regrets. No answer from Creality yet.

@fidelesquivel4974 6 месяцев назад

Check on side for voltage setting from factory it comes set at 230 volts has to be set at 120 volt

@ItsDaPlumber Год назад

Thats wierd, 1 got 2 rolls of "Hyper PLA" Is that what yours is?

@ChrisLoh Год назад

I got one High-Performance PLA (HP) and one CR series PLA

@phantomsirauron Год назад

I got one Ender white pla and one Ender black pla, it's truly just two random sets haha

@ItsDaPlumber Год назад

@@phantomsirauron Wow, they must have ran out of the Hyper. Again, i ordered mine within minutes of the release. less than 5.

@phantomsirauron Год назад

@@ItsDaPlumber yep I ordered mine about halfway through the month, had to pay my bills first so I expected as much lol

@charlesrestivo870 Год назад

Does he ever get to it geez

@Marc-ow3cd Год назад

push down on the top and it will seat

@ChrisLoh Год назад

Tried that, it lifts the other corner. Right now I have it just sitting on top of the printer. Works alright

@johnbickwernert7508 Год назад

Show live

@dougshellusn Год назад

Does creality control these reviews because everyone's review is the same. Benchy run with no comparison to known standards, ender 3, prusa mk3, etc.

@ChrisLoh Год назад

My P1P just arrived and I will be filming a comparison video - I wanted to wait for the P1P since the K1 Speedy is Creality's competitor for the P1P.

@redone823 Год назад

Any chance youll do a review on the pantheon HS3 mk2? Thanks. Input shaping helps reduce ringing on parts. Input shaping: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5fOhi-LL9dU.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-67JaN-fHago.html

@ChrisLoh Год назад

Thanks. I would love to check out the pantheon HS3 mk2, but at 10K it's a little out of my price range. I'll have to build up to that, unless they are willing to send one to me :)

@MisterkeTube Год назад

This is an enclosed printer. Printing PLA on this is almost an insult. To test this decently, performance with PETG, ABS, ASA, PA, ... should be checked. If PLA is all you care about, the P1P will be way better in the long run.

@user-cp4pb5xz2c Год назад

Well I will say nothing compares to bambu so far .

@ChrisLoh Год назад

Yep. Hopefully it spurs further advancement in the 3D printing industry and pushes better quality and faster printers in the near future.

@glanzone Год назад

wait till you get all the fun errors and you can not even run the machine, I am in limbo waiting for Creality to get back to me to fix the problems.

@ChrisLoh Год назад

Ouch. Hopefully, I wont have the same issues. WHat problems are you encountering?

@sentlon Год назад

bought mine 1 week ago this terrible printer, the extruder not working properly and buggies firmware to work with. ready to spend few weeks to fix the problems yourself if u want to get it. is like taking a gambling yourself to buy it whether u get the working properly unit or useless unit

@charlesrestivo870 Год назад

OK have to go fella seems nice but he dosent know what he's talking about which is everything but the printer

@joetkeshub Год назад

Are you serious? the benchy is well printed as you can see... YOU ONLY CAN SEE! We don't have any close view of that session. Frankly, there's a huge room for improving your skills. Btw 17 min 48 s is closer to 18 minutes not 17. POINTLESS post!

@AndrewAHayes Год назад

The recent drop in price of the P1P makes this printer a non starter unless Creality dropped their price by 100 £ or $ , I still would not buy one though.