Create Ladder in Revit | Parametric Array Family 

This useful tutorial by Revit Pure enhances the ladder family by having an angle parameter: revitpure.com/blog/heroic-ladder.

I followed this through two times. I learned so much! I needed to create a ladder for a loft and this was so clear. Thank you!

That was really helpful tutorial and an introducton to arrays inside families! I'm on my way to masrer such adjustable families so thanks a lot for this clear explanation!

Thanks a lot for the clear explanations. You could add another parameter to your Revit family to make the spacing between all of the rungs the same. As your first, last and the middle rungs' spacings are not the same in most of the times? For making the spacing equal you need to put the following formula: the rung offset or spacing can be equal to (total height/(number of rungs+1)) and you can remove the rung number formulas. In your formula you don't have the number of the rungs but you have the total height and rung offset/spacing. In my formula you can first devide the total height to the prefferd amount of spacing between the rungs and then put the result number minus one for the number of the rugs. This gives you a ladder with an equal spacing between the rungs.

WONDERFUL!! THANK YOU VERY MUCH FOR YOUR HELP!!

Thank you sir, your tutorial very informative. Learned a lot from your tutorial keep it up for the good work.

Very nice explanation! Thanks a lot!

Very useful information and nice presentation👌 Thank u...

Thanks very much for your tutorial, learnt a lot.. keep it up!

excellent video!

Really good ! Thanks 😉

Thank you

Nice Tutorial

hi tom this is so helpful..can you also do a angled rung ladder when angle is parametric? thank you so much in advance! god bless!

Excellent tutorial, thank you. But, say for example that I want my ladder to be in an angle... how could I make a new parameter with the angle information? Thanks!

Thanks for the tutorial sir, it's helpful. What happens if we didn't round-up in formula. I tried it but didn't found in which case it will fail.

Hello, if you want to make an instance the width of the ladder, how do you handle the constrains of the rungs?

Mate, thank you for this tutorial. Is there any way that this family can also incorporate the count of rungs as you stretch it up? So, to elaborate on my question, is there a way to add the number '1' next to first rung, number '2', next to second rung. . . . . .number '10' next to the tenth rung? Cheers to all !

I'm Brazilian, here is an English and Revit course together kkk 😂🤪

Hi, I have a problem, when I adjust the height manually, all the steps are hidden. What can I do? I like your content thank you

Can i make it slanted?

Sir the file is in a higher version of Revit can you share Revit 2020 version file?

If the lenght 300?

Amazing knowledge - Thankyou