Creo Surface modeling: 14 Ways To Create Curve

Подписаться 21 тыс.

Просмотров 95 тыс.

50% 1

Surface modeling with Creo Parametric 4.0:
14 Ways To Create "Curve"
* Sketched Curve
* 2D Curve created between points
* 3D Curve created by points
* Curve defined by points from CSYS
* Curve conected to another Curves
* Curve created on a surface edge
* Projected Curve
* Wraped Curve
* Curve defined by Equation
* Intersected Curve by curves
* Intersected Curve by quilts
* Copy edge from solid
* Curve from Cross Section
* Trace Curve defined by the mechanism
Feel free to contact me or leave a comment, or idea for another Creo tutorial.
... or try to check - Basic tutorial for Creo 4.0: amzn.to/2pFXqSs
If you enjoy my content, please consider supporting what I do: Buy a Coffee for 4KSide - ko-fi.com/vpalffy
or DONATE by www.paypal.me/4kside
WHY SHOULD YOU DONATE TO 4K SIDE?
More donation = more money
More money allows me to buy more coffee
More coffee makes me create more Creo Tutorials
More Creo Tutorials means more knowledge for you
More knowledge you have more productive you are
More productive so you earn more money
More money you earn more donation to me
More Thank you …
Vladimir Palffy - www.4kside.com
Tags: #creotutorial #creoforbeginners #4kside #creo #tutorial #vladimirpalffy #how_to_creo

Наука

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@harshitgupta7782 4 года назад

You are doing great sir. We students who couldn't afford paid courses are dependent on people like you. Love from India...

@nejcar92 Год назад

BEST CURVE TUTORIAL

@parveenkalonia7127 5 лет назад

Its simply perfect vedio.....Love from india

@nikhil7pute 5 лет назад

I my self work on CREO but have never seen such clear and simple explanation 👌👍

@mechlown Год назад

thank you very much!!!

@muhammadzarka5816 Год назад

very informatic video

@4kside Год назад

Thank you for your positive feedback. Stay tuned, Vladimir

@BANAMALINASKAR 4 года назад

Very nice and Vivid illustration

@ochoa0042 7 лет назад

Thank you so much. I'm not even half way through and have learned so many extra detail to PTC Creo. Thanks!

@4kside 7 лет назад

Hi James, stay in touch and I will post a new Creo tutorials soon :)

@olawetterberg8515 3 года назад

Impressive and super helpful! I really love your surface tutorials

@4kside 3 года назад

Thanks Ola for your positive feedback. Stay tuned, Vladimir

@kamurudeenka461 4 года назад

Simply the BEST ... Thank you tons

@aleksandar.prokic 5 лет назад

Best tutorials for creo.Thanks

@4kside 5 лет назад

I would like to thank you for your positive feedback. Stay tuned. Vladimir

@manishshekhawat5529 3 года назад

THANK YOU VERY MUCH FOR YOUR GUIDANCE

@4kside 3 года назад

And thank you for your positive feedback. Stay tuned, Vladimir

@syedmurtazajaffar8833 6 лет назад

Simply the BEST ... Thank you tons Sir. God bless.

@4kside 6 лет назад

.. And I would like to thank you for your positive feedback

@SeanMcDonnell33 5 лет назад

This is AMAZING!! Thank you so much

@davidgray2986 3 года назад

Excellent instruction. Thank you.

@salihenestiryaki 7 лет назад

This is one of the most educational video tutorial about PTC creo.I wish everyone would do the same thing instead of creating known parts like rim without talk.I will follow you and wait for you to upload more videos like this.Also I am going to suggest you to my coworkers in my company also.Thank you so much. Greatings Vladimir...

@4kside 7 лет назад

Thanks for your nice / positive feedback. Stay in touch. Vladimir

@adygajjar4147 7 лет назад

thankyou so much for uploading this video it's really helpful to me....grate easy and piece full examples.

@4kside 7 лет назад

Hi Ady, thanks for your nice feadback.

@lamba1970 7 лет назад

I like very much this tutorial Vladimir. Is very useful to create surface. Thank you again, have a great day.

@4kside 7 лет назад

+davide lambertini I have tried to find best combination for surface modeling training.. And if designers understand How to work with curves.. They can start to work with surfaces :)

@guidopfeiffermann8513 4 года назад

Thank you! It is easy to follow you. I've learned much new.

@4kside 4 года назад

Thank you for your positive feedback. Stay tuned. Vladimir

@mohammadsadeghmazaherikoha9866 2 года назад

thanks a lot.I am happy to find your you tube channel. you are perfect in every thins .and your video is very good in talking clear, resolution,speed talking,...but If it possible add video as manufacturing or others module of software It will be better ,because I thinks you are perfect to transfer your knowledge to others It mean you are a good teacher for some body as me that want to learn better creo .thanks

@4kside 2 года назад

Thank you for your positive feedback. It so many good ideas for tutorials.... Stay tuned and I will post them soon. Bye Vladimir

@mohammadsadeghmazaherikoha9866 2 года назад

@@4kside thanks alot

@burkhardpfeifer732 Год назад

Thank you very much!

@nhattruongduong7130 2 года назад

hey sir, it is very useful to me. Thanks so much for sharing!

@mortonmanish 7 лет назад

I IMPRESSED...SIR..

@kishorb18 6 лет назад

Thank You Sir

@annazhao7688 6 лет назад

Very useful! Thanks!

@4kside 6 лет назад

Thanks Anna for your positive feedback. Please share my tutorials with your colleagues

@andyxue9159 Год назад

it is really great

@maeezshaikh642 5 лет назад

Thanks you sir

@veerbadra 7 лет назад

good to watch this tutorial which is very useful..... and please do make a video on mold for complicated solid bodies......

@nikhilkarnam4590 2 года назад

Ive watched a lot of your videos It's Very informative, keep doing more and more videos in creo.

@4kside 2 года назад

Thank you for your active membership. I really appreciate. Stay tuned, news tutorials coming soon. Vladimir

@letthemetalcut4148 Год назад

very help full

@ellesse59 7 лет назад

Very good Vladimir! Thanks so much for sharing!!! I would like to request a tutorial/s on all functions under DATUM (coordinate, point, axis, plane, etc). Also maybe more information/tutorials about choosing/when to choose references.

@4kside 7 лет назад

Hi, thanks for your comment and sugestion to new tutorial >> I will create it soon :)

@viktorkrasnik2350 7 лет назад

You are the best!

@4kside 7 лет назад

Hi Viktor, I am glad that you and another Creo users like my tutorials. I will try to learn to "you" always more and more :) Best Regards, Vladimir

@deepakkhandekar007 6 лет назад

Really you are the best sir.

@nafeesrehman5094 3 года назад

Sir are you great.

@4kside 3 года назад

Thanks, stay tuned and share my tutorials with your friends. New tutorials are almost released. Bye Vladimir

@steebankraj9664 2 года назад

Can you explain what is existing surface and curves

@aloysiusreagan9283 6 лет назад

thank u so much sir Vladimir palffy ,this is very useful to my career and I want information about the options tab .

@Oski360 7 лет назад

Brilliant! Just Brilliant! This helped a lot with getting started with my work. This type of video is the best kind, the type when we get to learn many different ways to do something. Do you have any plans to make more of these videos? Like 14 ways to make a hole or something? :)

@4kside 7 лет назад

Oskar Isacson Hi Oskar, I have a couple of similar ideas for new Creo tutorials. Some of them I have created.. For example Creo 4.0: Rounds.. Try to check it... I think that I can say that is tutorial about... How to create rounds in 15 ways :) Stay in touch, Vladimir

@Oski360 7 лет назад

Awesome, I will check that out! Good luck with your future content!

@MuhammadAbdullah-dx6hc 5 лет назад

tooooo good (y)

@autocadcreo4988 4 года назад

Thanks Sir, But how to use extrude after that wrap Sir? because I want to wrap reinforcement plate on cylindrical part.

@BANAMALINASKAR 4 года назад

Kindly post such Tutorial on Creo 6

@ganeshdevarkar8774 4 года назад

Sir this video is really good for understanding curve tracing. Can you please make a video for how to get length between two bends (L),angel of rotation in 3D space (R) and bend angle (A) when 3D pipe model is available

@ganeshdevarkar8774 4 года назад

Pipe model could be as you have made while describing 3D curve (offset coordinate points)

@4kside 4 года назад

Thank you for your idea. Stay tuned, I will try to find some example. Vladimir

@jackzhang3531 7 лет назад

It 's a good tutorial for beginner of creo ,and I suggest that you can add the method using the curve of style surface ,which is more powerful and helpful for us when we need to build the style surface

@4kside 7 лет назад

I have plan to create tutorials for all Creo features. Style feature is really powerful and useful for ISDX modeling. Thanks Jack - for your suggestion. Vladimir

@bwilliams1815 5 лет назад

Very Informative. I went through all 14 but still have an issue with projecting a curve on a bottle. I have tried using curves projected from existing solids but it not functioning properly. Can I sent you my file to see which of the 14 will be best to generate the projection I want?

@4kside 5 лет назад

Hi Brian, send me please your file and some picture/description on vpalffy@4kside.com I will try to find some solution for you :)

@surajprakash3264 2 года назад

Sir how to create U/V curves on face and Isocline curve in creo??

@Beats0988 11 месяцев назад

Sir Please can you teach us Creo Manufacturing it's very important. I'll wait for your reply. Thank you

@4kside 11 месяцев назад

Thanks for your request, but for now I do not have these experiences

@akshatjain7694 6 лет назад

nyce tutorial sir can u please tell me how to extrude projected curve

@4kside 6 лет назад

Thanks for your feadback - try to check this video - maybe you will find answer there. In reality - I do not understand your question: how to extrude projected curve - send me please some example on vpalffy@4kside.com Regards, Vladimir

@akshatjain7694 6 лет назад

Vladimir Palffy sir suppose i project a close loop curve on a solid body but when i use a extrude command in creo it will not extrude

@4kside 6 лет назад

Hi - if you use projected curve on a solid model you can not use Extrude feature (extrude is working only for sketched curves / sketched feature) For projected curves is much better to use Offset feature. I will try to create some example for you :)

@4kside 6 лет назад

Hi, I have tried to create video tutorial for you - where you can lear - How to project curve on surface and than reause it for Extrude feature: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XGj9brK_YQ0.html

@naveenkumargulla4110 6 лет назад

Sir can you please upload a video for drawing a sine wave using equations on a knife in creo???

@4kside 6 лет назад

+Naveen Kumar Gulla Hi, thanks for your idea... I will try to create some examples for sine equation. Stay in touch. Vladimir

@naveenkumargulla4110 6 лет назад

Thanks alot

@Yathartha_Singh 6 лет назад

How would you create the piping using framework extension on the datum curve through point

@4kside 6 лет назад

... I hope that my old video tutorial for Expert framework extension will be helpful for you -ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_15b4Uy9WOE.html&t=

@RamRam-xb9ym 4 года назад

Is it possible that copied curve to hide it permanently? in my case for example i use the same Technic , Sweep option with copied curve, but while im drawing it shows , so i make it hidden. for what so reason when i open it after some days the drawing the copied curve gets visible. How do i hide the copied curve in my 3D Model permanently without loosing it from my model?

@4kside 4 года назад

Hi, thanks for your question. If you hide feature in the Model Tree it is only temporary. You need to Save Status of layers (try to use search for this feature) or jump into Layer tree adn RMB Save status and then Save your model. Stay tuned, Vladimir

@marreddyvamsi9063 5 лет назад

can we create 3d curves (splines) directly like in solidworks

@4kside 5 лет назад

No, it is not possible

@pandianesakkialagar2937 5 лет назад

Anybody have experience about vibration force vectors creation in creo parametric. 3.0 or 4.0

@4kside 5 лет назад

Sorry, I do not know

@Bromosexuell 6 лет назад

28:38 t stands for trajpar, not time

@4kside 6 лет назад

Hi, thanks for note - you are right T parameter is not "time" but in the video I have tried to explain that parameter T is from 0 to 1 and T as time is good to remember :) Thanks one more time. Vladimir

@Bromosexuell 6 лет назад

Nevermind, its a really helpful video anyway! Keep up the good work

@hodshonf 4 года назад

Style is more automotive.

@markszlazak 6 лет назад

Does Creo 4.0 have a capability to do 3d-sketches of lines and curves like in the following Solidworks video. If not then what steps can you use to get something similar? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HO-yg6sC5t4.html

@4kside 6 лет назад

Hi Mark - sorry but is not possible in Creo 4.0 In the Creo you can create points offseted from CSYS and than use 3D curve as straight lines with/without rounds or as spline :)

@markszlazak 6 лет назад

That is unfortunate. The Creo people should work on something like this. Solidworks had a good idea with making sketches 3D like this.

@4kside 6 лет назад

Hi Mark - it is only one part of modeling :)

@markszlazak 6 лет назад

Important enough that a big company makes this tool.

@aloysiusreagan9283 6 лет назад

thank u so much sir Vladimir palffy ,this is very useful to my career and I want information about the options tab .

@aloysiusreagan9283 6 лет назад

thank u so much sir Vladimir palffy ,this is very useful to my career and I want information about the options tab .

@4kside 6 лет назад

Aloysius Reagan Hi, thanks for your comment. I do not understand your question: do you want to know more about Option tab for which feature?... Or do you want to know more about Creo configuration? Please describe it little bit more and I can create some new video tutorial for it :) Regards, Vladimir