No video :(

Crucial TIPS To RECONDITION YOUR VEHICLE BATTERY Using NEW Arc Welder, For Cars Trucks, Semi, RV

Подписаться 498 тыс.

Просмотров 15 тыс.

50% 1

If you bought the new Welder here are some very Helpful tips!
THE BEST Ceramic Coating EVER goo.gl/z9TrgR
Hoolios Tools Below
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
Welder Used in video amzn.to/3L0yP5v
You can go with the 180 AMP amzn.to/3OX5pqa
or
You can go with the 200 AMP amzn.to/3EjGjgd
Syringe amzn.to/44tvouU
Distilled Water amzn.to/3L0brFo
Best Welding Gloves amzn.to/3KZS53b
Best Welding Helmet amzn.to/3OTXmKF
Wall Mounted Power Washer amzn.to/3PeGYpq
Original Battery Video • How To RENEW CAR & TRU...
Our Motorcycle Channel / sweetscoots
Camera Used amzn.to/45khwnm
For OUR FREE GIVEAWAY
Just Send a comment to us that you want a free sample in our free giveaway.
Our channels:
/ sweetprojectcars
/ mrknowitallguru
/ sweetscoots
/ sweetmotorhomes
ALERT**** Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
________________________________________________
If you would like to help us out.
www.paypal.me/...
________________________________________________
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this RU-vid channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@SweetProjectCars 11 месяцев назад

Folks here are some great tips to using your new battery re-vamping machine. Quote of the Day: *When a man opens a car door for his wife, it’s either a new car or a new wife*

@1oldteck 11 месяцев назад

Thanks

@miketonon7946 11 месяцев назад

My battery is boiling over at 30. What am I doing wrong?

@SweetProjectCars 7 месяцев назад

mike turn it down until it is just boiling and let it do its job there and make sure you dont have too much electrolyte in the battery

@healthfullivingify 11 месяцев назад

Thanks, Sweet for encouraging all of us to restore old sulfated batteries the easy way- with our DC welders. May I suggest for everyone's safety that everybody get a 2' long black ground cable and a 2' long red hot cable and take a minute attaching those to your battery. Then when you are clamping the welding ground and your positive electrode stingers and charging with caps removed, any sparks you get are nowhere near the open battery. Just a friendly suggestion. Keep up the good videos, Sweet!.

@SweetProjectCars 11 месяцев назад

Thank you for watching and sharing, have a great day. mad Mike

@silvergrizzly316 11 месяцев назад

Hey 👋 Mr. Revamp Champ!!!😂 I took the ground clamp off my welder and put a Mag Nut on it, bestest thing I ever done👍 BroTher, y'all have a stupendously awesomely week!!! and don't forget to tell Miss Esméralda that Hoolio said "duh huh" she'll know whatcha mean 😂🤣😅🤣😅🤣

@SweetProjectCars 11 месяцев назад

Awesome Jay!! Thanks as always for the view and input, we really appreciate it! Everyone sends their best to you and yours, hope you have a fantastic week as well my friend. mad Mike & team

@GOLTURBO555 24 дня назад

Thank you! It worked here. Just the breaker tripping... But the battery is like new with 8 cycles and 24h of slow 2A charging.

@benjaminchavez1232 5 месяцев назад

For anyone who is trying this and your breaker keeps tripping...use the arc force setting on the right side light. This allows you to start at 0 power to get a good boil for 5 mins then the 10 min rest. Slowly work up to 30 power. This is working for me. Arc force gives more amps at less volts so the breaker won't trip

@waterdd1 6 дней назад

Thanks for the tip. I’ll give this a try, because I keep tripping my breakers even at 50. Perhaps it’s because I have a new home with all these fancy breakers: dual purpose combination AFCI/GFCI

@davidv3090 8 дней назад

Awesome, Thank you! & for the quick reply 🤙🏻

@SweetProjectCars 8 дней назад

Glad to help David! Thanks again for watching, have a great day. mad Mike & team

@wolverine89893 11 месяцев назад

Thank You for the clarification, as well as where to set the welder. What to do, as well as what not to do, so you don't blow your fuse or cause boil over great tips and advice 😀

@SweetProjectCars 11 месяцев назад

Glad to help Kevin! Thank you for watching and commenting, it's always a pleasure my friend, have a great week. mad Mike & team

@Leonardokite 11 месяцев назад

I had the problem with breaking breakers, and that may have been my problem I'm not sure. I know my circuits aren't that great. I just took my ecoflow battery backup system and it worked just fine with running the machine. I started at 30 and ramped up to 70. Bottom line is I got the job done! Oh, and I just had another clamp that I used to clamp onto the battery post and then use the units clamp to clamp onto that clamp. I guess you could say I had a clamping good time hahaha

@SweetProjectCars 11 месяцев назад

Thanks for the tips Leonard, we truly appreciate the input as it helps other viewers! Have a fantastic week my friend. mad Mike & team

@kylemlm 11 месяцев назад

Thanks Mike, I recall this video well and did something similar during covid days for battery.

@SweetProjectCars 11 месяцев назад

Glad to help Kyle! Thanks as always for watching and sharing, hope you have a great week my friend. mad Mike & team

@Nico_335i_DCT 11 месяцев назад

Great small unit Mike. Thanks for sharing. Have a great week! Regards Nico.

@SweetProjectCars 11 месяцев назад

It really is Nico! Thanks for watching and sharing my friend, have a fantastic week as well. mad Mike & team

@timbrimmer9701 6 месяцев назад

Mike. I bought the MMA 200 a few days ago. I plugged it in to several different 110 volt outlets in the house, some with 15 amp breakers and some with 20 amp breakers, and was unable to keep the machine running for more than 10 seconds before the breaker tripped and turned off the machine. What voltage and amperage circuit breaker are using in your videos using the Vevor? So, I took the machine to a friends house and plugged it in to 220 volt service and was able to run five 2 min/5 min cycles on a 12 volt deep cycle marine battery that is no longer taking a full charge. Before the cycles, the battery measured 10.6 volts on the multimeter. After the cycles, the battery measured 12.9 volts and load tested beautifully (only dropped down to 12.5 volts under load). Thats' the good news. Now, for the bad news. I got home, reinstalled the battery in my boat, hooked up all the wires, turned on my two depth finders and within 5 minutes of powering the depth finders, the voltage on the battery dropped to 10.6 volts. What is going on? Have you seen this before? Any advice would be appreciated. Thanks.

@brandonwhite2780 Месяц назад

I also bought the 200 series and I'm having the same problem with my breakers. In the video he's using the 140. I guess bigger isn't always better.

@marcob.7801 7 дней назад

Hey Mike,....I guess this methodology couldn't work on an AGM battery? How could a person "monitor" a boil? Any help would be greatly appreciated! Do you have a favorite or different inverter arc welder that you might recommend? And many thanks for sharing all your knowledge over the years.

@SweetProjectCars 7 дней назад

It works only on lead acid batteries Marcob, we like this unit amzn.to/2K1UsWQ Hope this helps my friend, have a fantastic day and great weekend. mad Mike & team

@duperfastEUC 11 месяцев назад

Just the instruction I needed! Thanks

@SweetProjectCars 11 месяцев назад

Glad we could help! Thank you for watching and sharing, hope you have a great week my friend. mad Mike & team

@wilsonshardwarelocksmith4051 7 месяцев назад

Mike I have followed your directions to a tee and after about two and a half minutes the breaker blows. I have the welder set to the suggested settings. I have tried multiple locations and still have not got it to go past a few minutes. I am assuming the positive cable goes on the positive terminal and negative on the negative. Any help would be much appreciated. Thank you

@izh6421 6 месяцев назад

Did you ever solve the issue? I’m having the same problem

@MF-le7fp 7 месяцев назад

Awesome video, thanks for all the insight, and instruction! This seems to work very well for flooded batteries. Has anyone tried this with an automotive AGM plate type? I have a 7 year old Deka AGM that is finally showing “REPLACE” when checked with a battery tester. Continuity is also “bad” apparently, at just over 12%. All my other batteries show around 5%, but they are the flooded type. Regardless, I have nothing to lose so I’m going to give it a shot, after unsealing it and adding a bit of distilled H20 into each cell. Since I was just quoted $291 for a new Group 48 760 CCA replacement from Napa. I suppose the worst thing that can happen is showing up there with a slightly crispy core return...😂 Thanks again

@ONEYEDPiRAT 2 месяца назад

Just bought one from online home Depot only $60 bucks! Thx Boss, 1i .)

@troymomma 2 месяца назад

How well did it work?

@nasrleethetruth7673 9 дней назад

After using the welder do I still need to charge it with a battery charger or it's plug and start?

@SweetProjectCars 8 дней назад

Just put it on this amzn.to/3kmCThX for at least 24 hours after doing the process shown, then you're good to go. Thanks for watching and asking, have a great day. mad Mike & team

@khaibui3575 11 месяцев назад

tried this yesterday on my 4 years old working battery with 450 CCA ( 525 new ). zap it a few times and it jump up to 528 lol. i havent retest it yet , gonna do it later this evening

@SweetProjectCars 11 месяцев назад

Thanks for watching and sharing, have a great day my friend. mad Mike

@davidv3090 9 дней назад

Hi Mike, will this Vevor stick welder 140 amp work for a car battery or does it need to be 200 amps? Thank you

@SweetProjectCars 8 дней назад

Hello David, any of these will work my friend amzn.to/3L0yP5v ; You can go with the 180 AMP amzn.to/3OX5pqa or You can go with the 200 AMP amzn.to/3EjGjgd Thank you for watching and asking, hope you have a great day. mad Mike & team

@izh6421 6 месяцев назад

Hey so im having problems i followed step by step on the video only problem was i put too much water and is overflowing my breaker for some reason cant handle it even though its 20 amp. It shuts off after about a min. I dont know what i did wrong. Can someone help me find a solution

@billy2bob63 11 месяцев назад

Thanks Mike for throwing me under the bus! LMFAO 👍👍👍👍👍👍👍

@SweetProjectCars 11 месяцев назад

Any time Kerry :) LOL Just looking out for your best interests my friend :) Thanks for the view buddy, have a sweeeeeet week. mad Mike

@wg4405 11 месяцев назад

Well I bought one but haven't had time to try it out yet and I've got a mower battery to do .

@SweetProjectCars 11 месяцев назад

Nice! Thank you for the view and comment, have a fantastic week and all the best on your project my friend. mad Mike

@texasaggieproud 8 месяцев назад

Tried this with the car battery and got the bubbling immediately. However, using the exact same methods, I could NOT get either marine battery to bubble at all. I even cranked it using the 220 amp in my garage with no luck. Tried it 7 times now....5 min on and 10 min rest. Nothing more than 1.37 volts measured with the multimeter on the battery. Any idea why I can't get any bubbling?

@SweetProjectCars 7 месяцев назад

if you are using the same tools we share here in this video and you have enough of this amzn.to/3S5VC2u in the battery it should boil I can pretty much guarantee if you crank the welder up high enough it will start to boil sometime it takes a minute to get going mad mike out

@ONEYEDPiRAT 2 месяца назад

Solder your wire connections on the clamps too, they did a lousy job on my set ...

@blueovalracing1582 11 месяцев назад

Terrific video if you have the 200 amp stick welder, what settings are used as far as the amps with the dial

@SweetProjectCars 11 месяцев назад

Start out low and slow, then gradually turn it up until you get a rapid boil on all of the cells. See this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VYtkn-N_p4s.html it's our original welder/battery video and has a lot of helpful information about this process. Thanks for watching, have a great week. mad Mike

@blueovalracing1582 11 месяцев назад

Thanks will do

@stevecarlson6462 11 месяцев назад

So Mike, how about those pesky side mount terminals? The one that screw into the side.

@SweetProjectCars 11 месяцев назад

As Hoolio would say, use el boltos in el holeios LOL Hope this helps Steve, thanks for watching, have a great week my friend. mad Mike & team

@stevecarlson6462 11 месяцев назад

Heh, heh. Thanks to Hoolio. I just wanted to hear 😆him to say it. @@SweetProjectCars

@izh6421 6 месяцев назад

Would this welder work with a pickup truck battery as well?

@bigsy7057 11 месяцев назад

Do you ship to the UK

@SweetProjectCars 11 месяцев назад

Unfortunately, we don't bigsy, customs is ridiculous to send even a tiny sample. We truly appreciate the view and you being here with us from the UK, thank you, hope you have a great week my friend. mad Mike & team

@rhondaholland4604 11 месяцев назад

Julio should have promoted the welder again.

@SweetProjectCars 11 месяцев назад

Hoolio slips in and out of the shop when we're shooting videos, LOL, he does NOT want to get caught on the camera :) Thanks for watching, have a great week. mad Mike

@oakley635 8 месяцев назад

I got the 140 unit. Whats the setting for an Atv battery ? I tried bringing it to 70 it boiled. Next round 30 it boiled and lots of smoke.. I even emptied some acid out after the first round.

@troymomma 2 месяца назад

It shouldn't smoke, u must have an bad cell

@mikgamer6519 6 месяцев назад

Is this one also good for deep cycle and golf cart batteries? Or should I go with the decopro for those?

@SweetProjectCars 6 месяцев назад

This will work fine for the deep cells as well my friend

@mikgamer6519 6 месяцев назад

Awesome thanks!

@James-dt7ky 11 месяцев назад

Where's Julio?

@gregkeller80 11 месяцев назад

Think he got a hold of the syringe and hypodermic needle full of goo gone from the last video…let’s hope he’s ok!

@SweetProjectCars 11 месяцев назад

He's around James! LOL Thanks for the view, hope you have a great week. mad Mike & team

@chadrobinson6245 11 месяцев назад

How do i get the free sample?

@SweetProjectCars 11 месяцев назад

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at sweetprojectcars@gmail.com with your name and mailing address!!!