the front bucket is 4 feet wide 14 inches deep and 18 inches high. the side posts are now constructed out of 3x5x1/4 thick steel tubing. i have a 4 inch 1/4 thick pipe running across conecting the side posts. this is also the oil reservoir. i added power steering. there are two 1-1/2 bore 4 inch stroke hydraulic cylinders. the front end has been fabricated entirely. the front end is made of 2x4x3/16 steel tubing. the hubs/ spindles i got from norhterntool.com. each hub is rated for 1750lbs. and the hardest part about the modifications were adding a cub lo boys rear into a 149 tractor. that is where im getting the extra pushing power. obviously you can see that we added a thumb.
10 сен 2024