No video :(

Curved Shaker Style Corner Unit Part 1: - Bending and constructing the frame

Подписаться 59 тыс.

Просмотров 40 тыс.

50% 1

Thank you for watching part One of this two part video. In this episode I am laminating the curved sections of the frame and jointing them together, along with making a carcass to suit.
This is the first time I have made a curved cabinet, I've done a reasonable amount of curved joinery but not quite like this so hope you can enjoy the journey with me.
Lay Flat Tape Measure : amzn.to/3Gs3gfG
Vacuum Press : www.airpress.c...
Glue Applicator Budget Version : amzn.to/3snLfui
Part 2 - • Curved Shaker Style Co...
Let us know what you think in the comments below and subscribe for more videos.
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.c...
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?...
US: amazon.com/?ta...
INSTAGRAM ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoiner...
qpwoeirutyghfjdkslazmxncnv85
#Joinery #Woodworking #CurvedCabinet

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 170

@mjcooperman 2 года назад

Ah, the giddy excitement of a new tool performing far better than you even imagined. Love that 😀

@BradshawJoinery 2 года назад

Haha!!! When it solves such a problem and then does more than you expected...! haha

@carllamb6711 2 года назад

Well where do I start this week ?…. What can I say that has already been said, Your bloody good 👍 and you make it looks so bloody easy. Got to be the best woodworking channel on RU-vid. LOVE IT !!!! Thank you 👍👍👍👍

@BradshawJoinery 2 года назад

Haha Carl, thanyou so much, your positive feedback means the world mate. Not sure about the best, but thanks man :)

@craigtanner6916 2 года назад

Amazing craftsmanship! I hope that the recipient of this masterpiece truly realizes the amount of work, skill, and craftsmanship is required to make this cabinet! Thanks for all your hard work in bringing this to us!

@BradshawJoinery 2 года назад

Thankyou Craig, yes they do, very appreciative!

@jasonadams6442 2 года назад

Is there literally anything you can Not do. That’s the question. Unbelievable man so inspiring. It almost gives us amateur cabinet makers or false pretense that we can actually achieve the same greatness. So we attempt to give it a go and realize who are we kidding. No chance. Awesome job as always

@BradshawJoinery 2 года назад

Haha plenty Jason, i couldnt do this until i tried lol! Turned out pretty sweet too haha Thanks once again for the kind words!

@isar3707 2 года назад

Best joinery channel on the planet! Awesome work and fantastic description too. All credit. Real old school care, standards and craftmanship - well done.

@BradshawJoinery 2 года назад

Haha thankyou buddy, too kind!! Hope your well.

@S.JCarpentry 2 года назад

love peoples reaction and excitement when trying new tools.

@BradshawJoinery 2 года назад

Haha, That thing is so cool! haha

@electronbox 2 года назад

I genuinely learn so much from these videos, thank you for sharing your knowledge!

@BradshawJoinery 2 года назад

Cheers for that! Its good to hear feedback like this and is the main reason for producing them!

@fibbsjc Год назад

JFC, I think I have a handle on things and then I watch this and I might as well be a two year old watching a parent do taxes. Unbelievable. Well done.

@BradshawJoinery Год назад

Hey Jon. Please don't be put off. Before starting I was very unsure on wether I could achieve this so I'm positive you could do the same 👍

@davidjennings9253 2 года назад

Superb - I wish I'd had a vauum press when I did mine. I had to rely on strap clamps - but it worked. Great job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@BradshawJoinery Год назад

Thanks David, Yes the right tool sometimes makes all the difference. Have a look at curvomatic.

@johnpeplow3985 2 года назад

Love the way you make the jigs for making sure the joints are spot on and that vacuum bag is brilliant but the one that impressed me the most was the back of the pencil to spread the glue in the joints lol.😂😂😂😂

@BradshawJoinery 2 года назад

Haha thanks John, not many pencils left in my shop without a glue end! haha!!

@mattknights274 2 года назад

You really are a top tier craftsman Ollie.

@BradshawJoinery 2 года назад

Thakyou Matt really appreciate it

@michaelplays2449 2 года назад

Great video, thanks

@BradshawJoinery 2 года назад

Cheers Michael!

@henrysworkshop7477 2 года назад

Absolutely smashed that. Looking forward to the next part

@BradshawJoinery 2 года назад

Cheers Henry, Very happy with the end result!

@tomzivcic2135 2 года назад

Boss cabinet maker. Well done. Funny to see how it’s properly done . Hacks everywhere

@BradshawJoinery 2 года назад

Cheers Tom :) Im only making it up as i go along with this one haha!

@garyblake3130 2 года назад

Having made stacks of curved laminations over the years, a couple of observations that you may find useful moving forwards. In your vacuum bag slide in a base board with some grooves in it going the length and width around 75mm apart about 3 -4 mm deep, this will allow the bag to pull down evenly and better than relying on just the felt strip. Always use a glue such as cascamite that will go rock hard, PVA will always have give in it. When making the cauls for the shape you may want to put your ribs a bit closer and attach a cover board on top of them, as when you put a finish on the timber you will see the slight imperfections in the sheen when the light catches it. Great video as always, a true and proper craftsmen at work and always following good health and safety practices.

@BradshawJoinery 2 года назад

Cheers for that Gary! Yeah i was advised PVA will spring, but for the backing boards i thought it would be ok, seemed to work pretty well, but would probably cut the ribs another half inch back next time and have 12mm strips pinned around the curve longways before laminating the boards around next time so there is a ply effect. Love the info, and nice to know im not too far off the mark, ive not been taught this just leaning and figuring out as best i can as i went, Definitely learnt alot!

@paultay23 2 года назад

Bloody Hell Ollie, I kept up with you, but I am blown away with your technique and skill levels. Cheers Paul

@BradshawJoinery 2 года назад

Hey Paul, Cheers matey, its taken some head scratching this one. When the first curve failed, a little despair too

@davelethaby1279 2 года назад

You should be properly pleased so far with that build, Ollie 👍👍👍

@BradshawJoinery 2 года назад

Cheers Dave, Finished cabinet is on Instagram, just a massive load of footage to edit before part 2

@mauserkk98 2 года назад

Most enjoyable, looking forward to part 2 .

@BradshawJoinery 2 года назад

Cheers Nicholas! Probably a week on Friday!

@CreativeCarpentry 2 года назад

Fantastic work, curved components and machining them. This knowledge is so hard to come by - I really appreciate you taking the time to share it . Hooked on this kitchen series! Can’t wait for the next 👍

@BradshawJoinery 2 года назад

Cheers David, I will Pin any comments that provide education that i do not know, I am simply having my best guess from my knowledge and working things out on how to do this...!

@Cradley684 2 года назад

Doing a great job Mate, Thank's for the share, have a nice day & Stay Safe !!!.

@BradshawJoinery 2 года назад

Cheers Brian! Have a great day too!

@graemescott4825 2 года назад

Wow, that might be the most impressive RU-vid vid I've ever seen. Can't wait for part 2. Thanks for posting.

@BradshawJoinery 2 года назад

Nice one Graeme, that's good to hear. We spent a very long time editing all the footage down to this. Pleased its been worthwhile

@graemescott990 2 года назад

Amazing work!!! I sat through the whole video with a big smile on my face 🙂

@BradshawJoinery 2 года назад

Nice one Graeme, that is good to hear! Part 2 will be a week on Friday (hopefully) i have the cornice moulding for the top corner unit in the schedule for this weekend!

@leftwichprojects 2 года назад

Pure class Ollie 👌 can’t wait for part two. Brilliant work 👏🏼👏🏼

@BradshawJoinery 2 года назад

Cheers Jason! Probably be a fortnights time, the edit is a big effort on such a video!

@ronsmith2464 Год назад

Great video thanks, it's the first video of yours I've seen but it won't be the last.

@BradshawJoinery Год назад

Thankyou Ron, Thats great to hear.

@cliveclapham6451 2 года назад

"If it turns out Ok", l think you meant to say, this will turn out to my usual high standard👍🤣 Nice touch using a hexdrill bit as a center🎯

@cliveclapham6451 2 года назад

Great work👍 who doesn't love curves 😍

@BradshawJoinery 2 года назад

Thanks Clive! It turned out pretty good tbh! haha

@jcsrst 2 года назад

That's fantastic! You gotta love Poplar! Love seeing you do this super complicated stuff, thanks for sharing!

@BradshawJoinery 2 года назад

Thanks Buddy, yes its a lovely material. Some deem it not durable enough, but i love it!

@vincentrolfe1384 Год назад

Word to the wise on that brayer with well for gluing: Do clean after use but BUT make sure you have wiped all the water off of the roller surface and do not let the roller sit in the feeding slot of the well or else you will have corrosion and you will have to block sand that feeder slot just to get a smooth opening for next time of use. I put a 1.5" larger block of wood screwed to the blue brayer base so you do not have to kid glove the action every time you hang the brayer on the blue stand. Helps to steady the blue stand. I made a wedge for the 150MM wide brayer to narrow the roller path down to 2" and that keeps the amount of glue applied to a more precise amount and less buildup for the unused part of the wide roller. Yes, that brayer is well worth the extra penny.

@BradshawJoinery Год назад

Good advice thanks!

@petedavies4796 2 года назад

Awesome work Ollie is there no end to your talent,I know good preparation is the key but that dry fit was amazing, had to smile when you said you had gaps 1/2 mm over about 2in .Great job as always

@BradshawJoinery 2 года назад

Haha I was pretty darn pleased to be honest. I was winging my way through this one! lol

@denty32 2 года назад

Another cracking video mate, beautifully executed 👏👏

@BradshawJoinery 2 года назад

Thankyou buddy!!

@houtslager 2 года назад

I agree with your mate, make the doors first and I'd do them with a 3mm tighter radius to allow the spring back. Great video, keep up the excellent work. You make other makers jealous of your skills. Karl W

@BradshawJoinery 2 года назад

Yeah its a good idea, Ive since made the top cabinet using a few different things, based on experience from the base unit. Turned out bloomin brilliant. Although having 12 thin lamination there was absolutely no spring whatsoever of the former! Your very kind, thankyou!

@vdpeer 2 года назад

Very nice workmanship. I have done quite a lot of curved work myself.

@BradshawJoinery 2 года назад

Thankyou, well thats good to hear, ive learnt a lot!

@genep.1005 2 года назад

Awesome, turned out nice. Nice job !!

@BradshawJoinery 2 года назад

Cheers Gene, yeah blomin pleased with the result

@tonyharison2058 2 года назад

Good old air press, just got one after my original packed up, works a treat.

@BradshawJoinery 2 года назад

They are great to deal with and very helpful on the technical side! Have you seen the curvomatic system also?

@peterdnreynolds777 2 года назад

it looks amazing already, brilliant work

@BradshawJoinery 2 года назад

Thankyou Peter! :)

@tomellingworth7782 2 года назад

Another top video of a top project 👍🏻👍🏻 little tip if you didn’t know already turn your blue fhol roller around long part at the top and the glue roller hooks onto it to keep the roller from being compressed between rolling 👍🏻

@BradshawJoinery 2 года назад

Cheers Tom, yeah haha i figured that out at tea break after glue up! Lol. Cheers for the tip anyways.

@davidbalmforth699 Год назад

Super videos. How do you find time for educating all of us lesser mortals and still make a living? Anyway thank you! You always seem to answer my questions just before I have them myself. On tapered plugs, yes they are fabulous - I have the Veritas version which work fine. And yes you have some great kit which most of us amateurs don't have (mega wide sander, vertical board cutter, spindle moulder, tenoner, vacuum former etc) but the principles are there and we have to find solutions within our means! Inspiring stuff, please keep it coming.........David in Herefordshire

@BradshawJoinery Год назад

In short, im struggling now! On a quite demanding project with life issues getting in the way, video editing takes a back seat. I do have a friend that does alot of the work for me and wouldnt have a channel without him. Im pleased to see you being resourceful, most comments ask how do i do that without "insert machine name"

@Homerbub 2 года назад

Very good work!

@BradshawJoinery 2 года назад

Cheers Homer

@ivanwalker3391 2 года назад

A fine piece of work and ... a well made video too. Keep 'er lit Bro!

@BradshawJoinery 2 года назад

Cheers once again Ivan! :)

@deburgemeestervanhespedam3314 2 года назад

Very well done!! Fantastic!! Niek

@BradshawJoinery 2 года назад

Thankyou very much!!

@ixurlife8062 2 года назад

🥰😘 love it as always my man 💪 not only the technical ability you have, but how you explain everything in detail just you sharing your knowledge makes me smile especially after the last year I av had top work as always the bollicks big man keep it up 👍😏 legend that you take tbe time to share it for free with people up most respectful that alone 😎

@BradshawJoinery 2 года назад

Cheers mate, it does take a lot of time to film, but hopefully it is worth it! Im glad the videos are helping others tbh.

@philipwilliams8114 2 года назад

What a “honey” of a build!

@BradshawJoinery 2 года назад

Cheers Philip, she really is a honey! haha

@paulgarner6517 2 года назад

Fantastic work as always. Just a few ways that we do it at work which may help you in future projects. Our moulds are skinned with 2 or 3 skins of 3mm mdf then laminated and we also use duck tape around the edges just to restrict the airflow through the mould and prevent the mould collapsing. I love the bandsaw tramel idea we use a router tramel jig which also works well. Keep up the fabulous work 👏

@BradshawJoinery 2 года назад

Cheers Paul! I had a issue with the open sides, so ended up running a strip of timber down it! I learnt the drill/pin trick from my apprenticeship (not my idea) So happy to pass it on! the mould for the top cupboard, i sanded with a flat pad once it was dry, gave a dead flat curve with no sign of dipping between ribs. Ive seen a comment on here about the curvomatic aluminium system. that looks brilliant

@makosharksimmo8124 2 года назад

Great work

@BradshawJoinery 2 года назад

Thankyou!

@jimgeelan5949 2 года назад

I love doing curved work but every time i see someone starting to set out reminds me of a miserable old in a workshop years ago ( were the curve starts the profit ends ) 🤪 have you ever used polystyrene formers ? Send them your cad drawing they send you the former, much faster and nice and light and easy to store for next time. As you said the glue roller is worth every penny but make sure you clean it very well ( as if you wouldn’t ) i had a triple tank set up under the sink to filter the washing up water so it didn’t go down the drain, cleaned up every few weeks.

@BradshawJoinery 2 года назад

Haha pretty much Jim 🤣 the finished cabinet is lovely and well worth the effort but effort is an understatement! 🤣 I hadn't heard of foam formers until literally earlier today! Haha I cleaned it well In a bucket of warm water then ran the components under the tap in hot water. I wouldn't like to use it with solvent based glue! 🤣

@swt198597 2 года назад

nice work…I got to make one of that soon. Thanks

@BradshawJoinery 2 года назад

Cheers mate, good luck with it

@adriansams6066 2 года назад

Hi Oliver, nice work as usual and now people know why bespoke curved work is expensive.

@BradshawJoinery 2 года назад

Haha absolutley! The videos have had a good impact on my customers actually. Appreciate the products even more

@disklamer 2 года назад

Lovely job, extremely tight - a mm off is as good as it gets with anything made by hand. The skill and dedication to result is inspiring. I know it's all easier said than done, but since you asked for input; I wouldn't trust myself to match anything at this level of complexity, so I'd make all the curved parts first, in the same run, until the whole front dry fits and matches in every aspect. Also I'd start with the door panels and work outward, once the curvature of the doors is right that’s a good reference to fit everything around. And I'd still make a pig’s breakfast of the whole thing for sure.

@BradshawJoinery 2 года назад

Thankyou for that! Yeah on the wall unit i had a much better method and had all the curves glued before doing any machining! Actually worked out pretty simple

@miller745 2 года назад

tidy work !

@BradshawJoinery 2 года назад

Cheers matey

@tonyworkswood 2 года назад

That was brilliant I really enjoyed watching the process. The frame turned out superb expecially using actual machined tenons. One point if I may, it might be worth trying. When you used the ratchet clamp to pull the horizontal frame rail down to the former profile prior to the vacuum pressure taking over on the vacuum press. If you used 3 ratchet clamps with the ratchet mechanism underneath you could leave the clamps on. When the membrain starts to pull down you could release them slightly so you have even vacuum pressure across the surface. Hope the doors go to plan. Tony

@BradshawJoinery 2 года назад

Cheers Tony, I did use a couple of straps on my first attempt and left them in, i taped over the metal with masking tape alot but didnt like the metal edges being pressed by the bag. I ended up using thinner strips and maskign tape once the straps had it wrapped round i taped it then removed the straps. Doors went well, the finished cupboard is on my instagram story until tonight.,

@mauricerichard3611 2 года назад

Wow wow wow !!

@BradshawJoinery 2 года назад

Thankyou Maurice!!!

@giulioarti4852 2 года назад

Wow ! Great craftsmanship man . I’ll love to try something like this one day but think I’ve got a long way to go to get to your level Keep up the good work 👍

@BradshawJoinery 2 года назад

Thankyou! It is all possible by anyone! Just lots of small techniquies to learn! Good Luck

@ryanwestwood9254 2 года назад

Nice cabinet, look at the curvomatic aluminium profiles for the bag press, I think it's a great system. And if you flip the blue but up for your glue roller it will hang off it, keeping the roller hanging in free air.

@BradshawJoinery 2 года назад

Bloody hell Ryan, they are some bit of kit. Yeah i figured the glue roller stnad out while admiring it at tea break afterwards haha!!! See then part 2 (hopefully next week) The cupboard is made now, ive put it on my insta stories until tonight. If i do any more ill be getting a curvomatic

@Tez73 2 года назад

I use them eclipse trammels when I make stairs . I came up with a great way of setting them out that’s different than the traditional ways . It’s spot on . If your interested I could e mail it to ya . 😉

@BradshawJoinery 2 года назад

Sounds intersting Terry, Ill probably make stairs again at some point, you know how it is, seem to do a lot of something then a new project out the blue comes along and then a few more the same after. I cant comment my email, but search channel name for website and it should be on there, i haven't used it in years, but assume it still works (the website)

@andresimon2768 10 месяцев назад

Great work! Really impressive. Which program do you use for design?

@pluffer96 2 года назад

Lovely job. I've got tool envy, it's a middle age thing so i'm told???

@BradshawJoinery 2 года назад

Not sure about that, ive always suffered such idiosyncrasy's

@pauljackson5482 2 года назад

Really nice work. I might be a bit nieave but does the cost of making this make it too expensive? I would like to think that there are still people who are happy to pay for the craftmanship.

@BradshawJoinery 2 года назад

Cheers Paul, yes there are people willing to pay, infact i spend alot of time in that bracket where it would be more cost effective to choose another option

@pauljackson5482 2 года назад

@@BradshawJoinery that's great. I often think that another £100 in the budget would give me half a day more so I don't have to rush and cut corners that i wouldn't cut if I were working on my own house.

@tpaulfelder1 2 года назад

Fascinating ideo. I envy you your patience.Was this a commercial job or one for our better half ? I just wondered how do the large kitchen manufacturers tackle a job like this

@BradshawJoinery 2 года назад

Cheers Paul, its part of a clients kitchen! If you had set sizes they are cnc machined from sectional glue ups and more industrial lamination machines. A couple of good programmes to watch are inside the factory on bbc @ Ercol and How its made on curved doors.

@alanleea1644 2 года назад

Really impressed! Top joiner / cabinet maker. I was surprised at how little spring away from the former. What materials were you using for the cabinet?

@BradshawJoinery 2 года назад

Thankyou Very much Alan, Youll get more spring from flexible adhesives, the UF Resin is incredibly rigid. Cabinet is Birch Ply with a 1/4 sawn oak veneer

@crm.carpentry 2 года назад

I love those spreaders. Easy to clean as well. Sure you can hang the tool on That blue stand can't you? Or does it need to be mounted to the wall? I'm sure I remember it being able to hang on it on the bench....might be wrong...anyway, love watching this series. I've always wanted to do cured cabinets but I'm too scared lol

@BradshawJoinery 2 года назад

You'll be fine doing a curved cabinet. Just very time consuming!

@jonathanguy816 Год назад

Amazing work, how many hours would you say the project took?

@BradshawJoinery Год назад

the 2 cabinets took 3 weeks.

@martindorrance8133 Год назад

Hi. Thanks for an excellent video. What is the full circle for on your 1:1 layout diagram?

@BradshawJoinery Год назад

Hi Martin, I get a lot of comments to reply to, could you add the time it appears in the video and I'll get back to you? Example 23:14 👍

@martindorrance8133 Год назад

Sorry, it was around 01:56 where a full circle appears. …yes, I probably a bit autistic 🙂

@BradshawJoinery Год назад

AHH ok, that was for a storage unit they potentially wanted, it had a circumstance that needed to sit within the cupboard but ultimately didn't use

@vincentrolfe1384 Год назад

The PU glue that I use, Jowat, #150.91, white, requires a spray of water in the application area in order to activate the PU. It is PU dispersion glue in a 40 lbs bucket. What and how is your PU used? In the binding of books industry it (PU) requires a chamber where the air cannot get to the PU in order work.

@BradshawJoinery Год назад

Technically yes a moisture content is required, but there is always moisture in the air in UK, ive not had a problem with it not setting yet!

@vincentrolfe1384 Год назад

@@BradshawJoinery thanks and have a good day over there

@josh4236 2 года назад

Really clean work mate!. What was that pocket hole jig you were using called ?

@BradshawJoinery 2 года назад

Cheers Josh,. Its the kreg K5 I just removed the block and clamped iot to the piece

@Jock-mj4zd 2 года назад

Hi Bradshaw, great video as usual. I'm wondering about the glues you use! I work mostly with Accoya making windows and doors, and I use Wurth and Soudal 15 and 30 min PU glues, but they're pretty toxic and messy to work with. The gun-tube stuff you use in this video looks much nicer to work with, what is it and where can I get some?! Cheers, Jack

@BradshawJoinery 2 года назад

I think it was actually wurth glue, but as you say its more toxic than some others. A slightly more liquid version in the gun is sovereign chemicals PU Rapid, slightly thicker but less potent is Construction chemicals Wood Weld

@garyblake3130 2 года назад

@@BradshawJoinery I always preferred Timbond PU adhesive from Adkwik, it goes in the frame gun as well and is less runny and dries firmer. It also dries very quickly, don’t know how we managed before we had that.

@MrTrapper28 2 года назад

Can I please ask where you bought your pencil tramels from. Cheers Bob.

@BradshawJoinery 2 года назад

Hi Bob, many years back at a small shop in Sywell now non existant. Search Eclipse trammel

@MrTrapper28 2 года назад

@@BradshawJoinery ok will do, and thanks.

@talgatalibaev181 Год назад

💪💪👍👏🙏

@BradshawJoinery Год назад

🙌🙌🙌👍

@horacerumpole6912 2 года назад

Have you ever seen a Multi-Router?

@BradshawJoinery 2 года назад

I have yes, a little like that pantorouter from mattias wandel? Im not sure it would fit in a production workshop environment but looks a very capable tool!

@horacerumpole6912 2 года назад

@@BradshawJoinery well, this machine, which is used in many production shops, as well as furnituremakers shops, is capable of milling mortises for rails and stiles in curved doors amazingly quick and accurately, The work can be presented to the bit on edge, rather than needing a curved fixture as the tenoner did. You can also easily adjust the location of the mortise being milled into the mating face on the curved rail to balance the remaining material on either side for joint strength- This is a serious machine that does different operations very well . I do not ever use the tenon templates, strictly floating m&t only-

@BradshawJoinery 2 года назад

AHH fair enough, I will give it another look. Thankyou 👍

@tomr7241 2 года назад

Hope it's not a secret... How much you'd charge for this project? Hypothetically if you wish... :) Cheers

@BradshawJoinery 2 года назад

It was all in with the kitchen so i cant say exactly, Budget 7 days labour, plus materials and ironmongery.

@pieterhaarhoff7228 2 года назад

How much do you charge for all that preparation?

@BradshawJoinery 2 года назад

It's a tricky one, a good guess at the hours and materials required then a little wiggle room. It's was part of a big price for the whole kitchen.

@tpaulfelder1 2 года назад

I use to have a link that alowed me to show my appreciation via a donation (I dislike companies like Patreon who get in the middle of a transaction) could you put up the link again please

@BradshawJoinery 2 года назад

Hi Paul, thankyou for the support, I have added a PayPal me to the description. I can't add it to the comment as RU-vid delete's comments with links automatically.

@tpaulfelder1 2 года назад

Sorry to be stupid but I can;t see that link :-((

@BradshawJoinery 2 года назад

Hi Paul, I've added the link right at the top as well as further down the description. You may have to refresh the page to fetch the new one.

@josh132132 2 года назад

Hi, I was wondering where you buy your Plywood from in the UK please?

@BradshawJoinery 2 года назад

Hi Josh, this particular pack came from Latham's, special order oak faced birch

@josh132132 2 года назад

@@BradshawJoinery thank you 👍

@BradshawJoinery 2 года назад

There won't be any birch ply about at the minute with the Russia Job. Same story with all Russian sourced products. Redwood is scarce!

@josh132132 2 года назад

@@BradshawJoinery I currently just shop at B&Q or Wickes for my plywood, I was just wondering where professional woodworkers buy their wood from, wether I would be able to find a better quality plywood elsewhere. I am not sure where you are based in the UK but I'm around the Hertfordshire area.

@John-ds7li 2 года назад

How do you price something like this..?

@BradshawJoinery 2 года назад

If youve done one already easy, if not, best guess on time plus materials plus bit. Then its a question of wether you want the job or not bothered as to if or how much profit you add on.

@chrisgardner3606 2 года назад

After all that work on the frame you went and used pocket screws? Don't tell me, you have to get it on site for the template.

@BradshawJoinery 2 года назад

Cheers Chris, I think pocket screwing with domino location if a great way of merging the two components. Certainly not seen any detriment to using this method yet! I was a bit pressed to get the template deadline

@vdpeer 2 года назад

Are you in a shared shop?

@BradshawJoinery 2 года назад

Nope

@GlassImpressions 2 года назад

Has to be a crazy spendy cabinet.

@BradshawJoinery 2 года назад

Handmade Curved work always will be

@vincentrolfe1384 Год назад

There is a cheapo similar designed brayer from China that looks like the Pfohl but does not work. Don't buy it. I spent hours trying to correct the problems and gave up.

@BradshawJoinery Год назад

Thankyou! The Pfohl is a great bit of kit tbh!