In this video Chad goes over making a roller ball section for a custom/kitless bespoke pen, including measurements, tips and tricks. And as you will see in the video he adapts to some difficulties and comes out with a nice section at the end!
Thanks for watching!
Here are the specs for the piece he is working on:
55mm long starting section
9/32 drill bit 35mm (from tenon end)
5mm drill bit 50mm (from tenon end)
2.5mm drill bit through
8mm long cut for Tenon- Used M10x1 (single start) die for cutting threads
Home-made mandrel
Here are links to products seen or talked about in the video:
Tap and Die Sets:
www.turnerswar...
Drill Bits:
www.turnerswar...
Niche system:
www.turnerswar...
Top Choice blanks: (molten metal)
www.turnerswar...
Record Power Tools (parting tool was used in the video)
www.turnerswar...
Easy Wood Tools Carbide:
www.turnerswar...
Collet Chuck system:
www.turnerswar...
SC3 Record Power Chuck:
www.turnerswar...
Fine grit wet/dry sandpaper:
www.turnerswar...
Zona Paper:
www.turnerswar...
Ring Bling polishing compound
www.turnerswar...
Record Power Regent Lathe:
www.turnerswar...
16 сен 2024