Custom Intercooler For An Ecoboost-Powered ’55 F100 - Truck Tech S3, E10

Подписаться 1,6 млн

Просмотров 118 тыс.

50% 1

Our Ecoboost-powered ’55 F100 gets a custom-fabricated intercooler and the frame is treated to a full-on paint job.
PARTS USED IN THIS EPISODE:
EBC Brakes: EBC Stage 5 Superstreet Disc Brake Kits
More Info: pntv.us/pn_pt_...
Hypertech: Computer Programmer, Max Energy 2.0, Power Programmer, Cadillac, Chevy, GMC, Ford, Dodge, Ram, Each
More Info: pntv.us/pn_pt_...
Lizard Skin LLC: Thermal Insulation, LizardSkin Ceramic Insulation, Black, 2 gallons, Spray-on, Each
More Info: pntv.us/pn_pt_...
Lizard Skin LLC: Sound Control, Advanced Water-based Composition of a High-grade Acrylic, Spray-on, Black, 2 gallon, Each
More Info: pntv.us/pn_pt_...
Lizard Skin LLC: SuperPro Spray Gun Kits, 32 oz. Canister, 90 Degree Tip, Mixing Paddle, Each
More Info: pntv.us/pn_pt_...
Vibrant Performance: Aluminum Tubing 90 deg
More Info: pntv.us/pn_pt_...
Vibrant Performance: Vibrant Manual Bead Roller
More Info: pntv.us/pn_pt_...
Vibrant Performance: Aluminum Tubing 90 deg
More Info: pntv.us/pn_pt_...
Vibrant Performance: Vibrant Performance Bellmouth Velocity Stacks
More Info: pntv.us/pn_pt_...
Vibrant Performance: Aluminum Tubing 60 deg
More Info: pntv.us/pn_pt_...
Vibrant Performance: Vibrant Performance Classic Performance Air Filters
More Info: pntv.us/pn_pt_...
Vibrant Performance: Aluminum Tubing Straight
More Info: pntv.us/pn_pt_...
Vibrant Performance: Vibrant Performance VanJen Clamp Assemblies
More Info: pntv.us/pn_pt_...
Vibrant Performance: Aluminum Tubing Transitions
More Info: pntv.us/pn_pt_...
Vibrant Performance: Reinforced Silicone Hose Coupler Reducer
More Info: pntv.us/pn_pt_...
Vibrant Performance: Vibrant Performance Aluminum Tubing
More Info: pntv.us/pn_pt_...
Vibrant Performance: Reinforced Silicone Hose Elbow 45 deg
More Info: pntv.us/pn_pt_...
Vibrant Performance: Vibrant Performance Intercooler Cores & Assemblies
More Info: pntv.us/pn_pt_...
Vibrant Performance: Reinforced Silicone Hose Coupler 3"
More Info: pntv.us/pn_pt_...
Vibrant Performance: Vibrant Performance Reinforced Silicone Couplers
More Info: pntv.us/pn_pt_...
Brothers Truck Parts: 63-66 Cab Mount Conversion Set- 3/4 TON TO 1/2
Ford Performance Parts: 3.5L, 365 Horsepower, EcoBoost Crate Engine Kit from Ford Racing
JW Rod Garage: 53-56 Ford truck frames are made of fully TIG-welded 10-gauge steel for strength and durability, Complete MII hub-to-hub kit with double adjustable coilover suspension upgrade, Parallel four bar kit, Universal panhard bar kit
Single Source: DCU2021 Concept Clear-PPG
Single Source: K38 Urethane Primer Surfacer-Gallon PPG
Single Source: Single Source Inc was founded in 1995 to establish a new standard in customer service within the collision refinishing industry.
The Industrial Depot: The Industrial Depot - Fasteners, Hardware, and Shop Supplies
Vibrant Performance: The Source for Professional Fabrication Components
Vibrant Performance: Custom Fabricated Intercooler

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@PowerNationTV 5 лет назад

We'll continue to post these episodes here on RU-vid. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/truck-tech

@maskedmotorsdiy3575 5 лет назад

Guide-coat sanding on a frame? That's above and beyond the call of duty!

@jenseninterceptors 5 лет назад

That little rockabilly guy is pretty smart :)

@abyssalreclass 3 года назад

That's a big intercooler. Overkill maybe?

@retiredafce3373 3 года назад

Too bad LT quit!

@blackericdenice 5 лет назад

16:26 you can change the speedometer and shift speed with the programmer. You can not increase hp or torque on a n/a engine. The pcm does not control air flow off idle. If you want more power. You will need to change the cam or boost the engine.

@philmount299 5 лет назад

Great job using a modern Ford power plant! Great series to watch.

@number1pappy 5 лет назад

Ok I just looked up prices for a junk and crate 3.5 EcoBoost. Both prices are in line with what a equivalent horsepower v8 cost! So before I go on a bashing on v6s! Is there anybody out there who would actually do a build with the 3.5 EcoBoost and why? I'm just curious...

@mattsprayberry0 5 лет назад

15:20 Looks like the SHIT I just took

@psygn0sis 5 лет назад

18:18 Those "slots" are only there to keep the "dimples" from cutting groves in your pads... according to EBC. : )

@kevintucker3354 5 лет назад

That’s what she said.

@Raymonkey77 5 лет назад

I want that truck! If I was given something like that I would probably never get to drive it because I would have passed out and break my neck.

@rustybeatty6567 5 лет назад

I would definitely not go gloss for the finish but a Flat or matte finish for the frame or even use a spray in bed liner like process to coat the frame.

@OffGridOverLander 3 года назад

“Storing parts in a safe place” this just means that I am guaranteed to lose them later when I need them 🤣🤣

@rigging1377 5 лет назад

Why a EcoBoost, I would of went with the coyote. Not a fan of the sewing machine sound.

@jfindlay813 5 лет назад

Because fuel economy

@rigging1377 5 лет назад

@@jfindlay813 I don't build a truck for fuel mileage! Should of put a Prius setup in it then, lol gay....

@wild_horses 5 лет назад

They can add the v8 sound effect mode from the f150 lol!

@rigging1377 5 лет назад

@Spencer7445 _ The 3.5 can pull alot of Hp! Still sounds like a sewing machine. 5.0 has the best v8 note out of almost any v8.

@jfindlay813 5 лет назад

@@rigging1377 fuel economy gay? Please explain.

@blackericdenice 5 лет назад

There is more than enough room for the stock intercooler. Don't lie and say it can't handle the higher boost either. Remember Ford had a problem with them cooling too much. That is why they blocked off some of the cooler.

@backyardbuilttrucks1 5 лет назад

To much crap to go wrong with those engines.

@FortyTwoAnswerToEverything 3 года назад

Now I'm not used to seeing LT with full head of hair

@JohnDoe-ml8ru 5 лет назад

Ecoboost is shit.

@SPEEDFREAK6988 3 года назад

My question here is why did yall choose the ecoboost over the coyote?

@blackericdenice 5 лет назад

18:20 Stock GM pads are very high priced but no aftermarket pads will out stop them.

@branon6565 5 лет назад

blackericdenice...yeah no, and anyone with an IQ score above 80 has enough common sense than to waste money on a Garbage Motors product....

@gravitygear 5 лет назад

Ecoboost powered F100. I LOVE THIS.

@futten3230 5 лет назад

horrifying straight corners that makes for bad flow

@tharedpotatowwhale 5 лет назад

I like it, I’ve been thinking swaping a eco boost into a 93 f150.

@masoncomeaux4105 5 лет назад

Link on that tuner please. And will it work on a 15 5.3? I put 33 inch tires on it and my truck does the exact things yalls truck was doing.

@dwarf365 5 лет назад

Wow, really? It's called the description box for a reason. Check it before you ask questions. Besides don't be so lazy, Google exists. You are one of their sites right now so don't give any excuses.

@masoncomeaux4105 5 лет назад

I'm just to lazy! Lol. 🤣🤣

@grabir01 5 лет назад

Eco boost sucks

@luciankristov6436 5 лет назад

Jesus 6.2 liters and only 369hp lol wtf is that lame shit lmfao 😂 that's cute

@kevintucker3354 5 лет назад

I’m guessing the cop is Williamson County Tennessee. I lived in Williamson County Texas for almost 40 years and didn’t recognize the deputy’s car!

@kevintucker3354 5 лет назад

Why are those velocity stack donuts so pretty looking?! I rewound to look again. Man jewelry for sure...

@kevintucker3354 5 лет назад

Those slip joints (or whatever) that let the intercooler piping move under engine torque without loosing boost pressure in genius!

@dilullo8182 5 лет назад

Third

@pascalolesen5187 5 лет назад

Every Ecoboost I have owned had an issue. Ford quality is up to par with Dodge= JUNK

@branon6565 5 лет назад

pascal olesen....still MUCH better than any Garbage Motors vehicle, and foreign owned Asian produced hunks of junk....

@Odin3v 4 года назад

Owner problem.

@pascalolesen5187 4 года назад

I worked for Ford. You should have seen how busy the shop was with them and the 5.0s tapping

@michaelteeple8704 5 лет назад

Cool late model motor. Whats sad is a Briggs and stratton would be an improvement and more reliable. Always sucks going backwards with a project. And I mean no disrespect to briggs and st. comparing them to that scrap metal yall are calling a motor.

@karlsmith2570 5 лет назад

Michael Teeple personally, if that were my truck, I'd put a 302 or even a 351 Windsor between the frame rails

@wild_horses 5 лет назад

Why would you waste your time on a Taurus motor? The 3.5 ecojunk isn't worthy of a build .

@wild_horses 5 лет назад

@Spencer7445 _ it started out life in the Taurus sho , Then went on to the f150s then the ford gt . Hopefully ford will step up there game because if they dont the new Corvette will eat their lunch!