very nice., saludo ako sayo brother., sa preparasyon palang.,talagang polido at ang materiales na gamit mo ay solid talaga., halatang my alam ka talaga brother saludo ako sayo..🫡🫡🫡💪💪💪 proud from bukidnon nka subscribe na ako...
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit. I did 1:1 ratio with 3 drops of dish soap.
@@noelfrancisignacio8752 He knows that, that's not what he's asking. Before the guy in the video puts on the clear coat, he touches the tank in a few spots, it looks like that makes the crystals form from where he's touched the tank. Go back and have a look....
Hi Ron, I spotted that too. It looks like it made the crystals form more uniformly, like the centres of the crystal patterns are where he touched it with his finger before clear coating it. I'm going to try this myself... It would be nice if the painter confirmed this... Edit, Ron, I read through the comments and I was right, this was his reply to the same question you asked.. "Yes sir.. you point it were you want to start the crystal effect".... Good luck mate...
Hello brother i am from pakistan and i really like your tank design bro what kind of product you were using in whole process kindly explain me i would be very happy if you guide me.
Thats urea fertilizer sir you put urea fertilizer into hot water then mix until urea is melted ratio 1/1 urea and water then put small drop of dishwashing liquid and u mix it. Mix sure the paint is dry when you put urea to the surface then wait until the liquid is dry then mistcoat 2x your 2ndcolor ☺️☺️
Are you using Urea crystals? I assume the bottle you used before placing it in the sun was water and dish soap? The fractals turned out great, by the way.
@@scottjewell1420 its 1 part urea and 1 part destilled water adding 2% ox gall is a must. so as example: for 200ml fx -> 100g urea + 100ml dest. water + 2ml ox gall. only works with warm temperatures and applied best with cloth soaked full of the fx solution. add thin layer of the solution and wipe each side one time. let dry.
Boss tanong lng.. ano kaya problema bakit maliliit ung crystal na na foform nya?? Tas additional pag nag lagay ka na ng black ilang minutes bago mo nahugasan? Nung tinagalan ko kasi sakin di ko na maalis ung black😂
Good po bossing bawasan nyo po yung yung urea si baka po sobrang tapang nong mix nyo tapus po dapat tuyo na yung black bago nyo hugasan patuyoin nyo po ng 45mins to 1hour po dipendi po sa kakapal nong black.. wag nyo po nasyadong kapalan yung black sir para madaling hugasan
@@abpworkstv9761 isa pang bossing... Di ko pa makuha ung malalaking crystal nya ... Pero nakita ko sa iba is kailangan maiinit ung panahon pero bawal daw ibilad sa araw... Ano kaya pedeng gawin kasi dito sa amin is malamig... Pede ba syang gamitan ng hair dryer?😂
Hindi gaano nagkicrystal eeffect sa akin sir, bat kaya? putol putol crystal nya unlike sa video mo mahahaba at solid ung line ng crystals, ano kaya reason don? nilagyan ko din butil para doon magmula ung formation ng crystals kaso un nga sir di maganda kinalabasan
Urea fertilizer po yan maam meron po tayong video tutorial nyan maam kung pano po yung pag gawa eto po yung link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oV61Rh-tRyQ.html
@@abpworkstv9761 boss after mo nilagyan nung urea ano ung parang tinutusok nyu po? At ilang minuto po nakalipas after nalagyan ng urea saka pd nang tusukin?
Sir mraneng slmat Po s sagot nyo sir tnung kulang pho nka preper npo tpoz Po nag pramer Ako Ng Weber epoxy pramer tpoz Po ginamitan Kuna Po Ng silver tpoz Ng Lagay npo Ako Ng pertilazer hnd Po sya nag react sir patulong nman sir gusto kung mtutunan
Greetings to my friend. I'm watching your channel and your fantastic work and talent. I have one question. How do you achieve such big and beautiful shapes? I know that, in essence, the crystallization process must be disrupted at some stage. That is, to make a scratch with a sharp object. My result so far is just a little starfish. How are you doing at this stage, please? Thank you for your work, inspiration and advice!
Thank you sir for yor appreciation ☺️ by the way sir you try reduce the urea sir. I think you mix more urea than hot water sir try to mix again and this time reduce the urea and put small drop og dishwashing liquid
