Custom S19 Bitcoin Miner Control Board from Braiins - BCB100

Подписаться 26 тыс.

Просмотров 2,6 тыс.

50% 1

The BCB-100, Braiins Custom S19, S19j, S19pro, S19Xp control board running Braiins OS custom Bitcoin Miner ASIC Firmware is out and I have tested it here.
It swaps directly and very easily with your existing controller, your bitcoin miner will get an new IP address and custom firmware that allows you to overclock, underclock, or just run the same speed with more efficiency. It can also spoof your fans in the firmware so you dont need any more fan spoofers!
LINKS:
BUY BITCOIN MINING HARDWARE safely - contact blake@muskminers.com or go into my discord server under muskminers-asic-sales / discord
The BCB100 Control Board: You can source one of these boards through my hardware sponsor Musk Miners by emailing Blake@muskminers.com - tell him you came from the Space youtube channel.
HASH VORTEX: To get a 3D printed shroud for your miners that will make them quiet and run cooler - go to www.hashvortex.eu and use code "SDW" at checkout! 10% off..
8" Inline Fan: amzn.to/47iPx8G

Развлечения

Опубликовано:

15 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@locher6832 5 месяцев назад

The keychain is a hardware dongle that Braiins had produced for a problem that they later solved in software. Cause of that they give it away with their boards as a keychain. Better than throw it away. I got one too with my BCB100 😎

@Dpaq13 5 месяцев назад

Is it limited run

@johnnyquest1996 5 месяцев назад

Thanks for the video!! If you no longer use the fan controller spoof chips for your AC Infinity fan do you just let the fan run at 100%? Thank you!

@SPACEDESIGNWAREHOUSE 5 месяцев назад

The miner thinks they’re running at 100%, but in this weather I have my AC Infinity fans manually set to 4/10

@VoskCoin 5 месяцев назад

thumbs up for the zombie jokes

@SPACEDESIGNWAREHOUSE 5 месяцев назад

haha, Thanks Vosk.. Might have to yank my wife into more videos - that was pretty fun having her there for the filming..

@lsdave 5 месяцев назад

The keychain is an arduino compatible Microcontroller. Could likely be used for flashing control boards or doing some type of diagnostics. maybe it was a way to MOD a whatsminer P11 power supply with the marking on the PCB

@SPACEDESIGNWAREHOUSE 5 месяцев назад

I did see that the onboard chip works with arduino - let me confer with my guy over at Braiins to see what its for and see if you take home the prize!

@locher6832 5 месяцев назад

@@SPACEDESIGNWAREHOUSE Here is the statement of Kristian from Braiins in October 23: "We made 40k of them to install our custom Braiins OS+ but then we found a software workaround so we don’t need them anymore so we made these keychains." I don't want to win the price cause shipping to Europe would be very expensive anyway and I think this shroud have to go to an American.

@spencerjones2610 5 месяцев назад

asic to moon never worked on my s19j. I got braiins to work just fine. I underclocked my L3s before underclocking was cool.

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Very nice! I have a small stack of L3’s that just sit in the corner of my warehouse. I should really find something to do with those.

@user-dt9ng6jy8i 5 месяцев назад

losing weight and gaining hair... every middle aged mans dreams. well done.

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Its no small feat in our 40's, thank you!

@popstream4972 5 месяцев назад

Tried using this board on my s19a pro and no luck any ideas on updated firmware for the asic to make it compatible with braiins

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Oh interesting. Yeah, the ‘a’ models aren’t on their compatibility list at all.. I’ve never had one of those machines.. they have a telegram group where people answer those kinds of questions.. I’d look for that

@jamesch7428 5 месяцев назад

Is braiins even selling that control board yet? I can't seem to find it.

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Its for sure for sale on kaboomracks. And yeah, I see it on braiins as well! shop.braiins.com/products/copy-of-braiins-bcb-100-control-board-for-s19-series-september-pre-order

@SetitesTechAdventures 5 месяцев назад

So there is still a dev fee if you use their board on another pool? What's the advantage of buying their board if there is still a dev fee?

@SPACEDESIGNWAREHOUSE 5 месяцев назад

The advantage is that their board can make your machine run more efficiently. For instance, if I run my S19J 104 on stock firmware with the stock board, it will hash at 104TH and pull 3000 watts of power. With the Braiins board, the same machine can hash at 104TH but only be using 2800 watts. OR it can run closer to 110TH at the same 3000 watts as stock. So youll still end up ahead even when paying the dev fee. The way I run mine is UNDERCLOCKED to about 75TH and running at 1800 watts and that way its so efficient that its the same hash per watt as an XP machine.

@SetitesTechAdventures 5 месяцев назад

@@SPACEDESIGNWAREHOUSE Is the board more efficient than running Braiins OS+ from an SD Card? Or is this a version of the S19 that can't run custom firmware?

@SPACEDESIGNWAREHOUSE 5 месяцев назад

@@SetitesTechAdventures I know the board has a way faster chip and a lot more memory and is compatible with a bunch of different models AND has a fourth slot for a fourth hashboard, but I don’t know wether or not it’s any more efficient. If anything I could see it resetting faster so a quicker boot up and quicker autotune. But I don’t know the answer.

@SetitesTechAdventures 5 месяцев назад

@@SPACEDESIGNWAREHOUSE a 4th hashboard is interesting. I'll have to look into how that works.

@Giroux68 5 месяцев назад

You must have cut all that fat off with you scissors 😅. What temps are you letting your machine run at?

@danjamesking 5 месяцев назад

What kind of th can we expect at 3100w?

@SPACEDESIGNWAREHOUSE 5 месяцев назад

I would estimate 110-115TH with an s19j pro 104 running at 3100w

@danjamesking 5 месяцев назад

Thats awesome. ROI in couple of months then. Sweet.@@SPACEDESIGNWAREHOUSE

@johnnyquest1996 5 месяцев назад

does it work with the S19j Pro+ ?

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Officially it only supports the list on their website that listed off in the video. It MAY work with other models but they would be “unsupported.”

@aminur14 5 месяцев назад

6:30 is that why my s19jpro is only running one out of 3 hashboards ?????. I spent £2k on this miner, if you can help me in anyways, it will mean the world to me. Btw i i bought my miner back in april, on the first day it went wrong, and because the company had no refund policy, i'm left with a really heavy paper weight

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Holy crap! Well there are a few reasons it could be doing that, but I would DEFINITELY check the screws on your bus boards.. I’d wiggle the ribbon cables that go to the control board..

@aminur14 5 месяцев назад

@SPACEDESIGNWAREHOUSE thanks, i ordered the control board and inline fan. Ill swap over the control board, tighten the screw and hopefully it works. If not im gonna have to wait till February to buy another s19j pro. Btw where would you recommend i buy the asic from ? Im from the uk.

@SPACEDESIGNWAREHOUSE 5 месяцев назад

@@aminur14 you should buy them from musk miners. They can ship anywhere. S21’s might be available late in February if you’re lucky!

@SPACEDESIGNWAREHOUSE 5 месяцев назад

@@aminur14 Blake@muskminers.com is who to contact. Tell him you came from here.

@aminur14 5 месяцев назад

@@SPACEDESIGNWAREHOUSE thanks, I will bro, love your vids btw 🫶

@saminekunis8680 5 месяцев назад

He has a very honest & like able Humor & in no way fake like other Creators

@paulgrep3193 5 месяцев назад

Been using Braiins on all my Bitmain miners for a while- initially via SD card and now using the Windows Toolbox as it allows remote installs. And also because using the Toolbox you can now install on S19JPro+ and S19kPro with no SD card slot. But… I cannot see any advantage in using either this control board or any of the other replacement boards when the ROI of the purchase price is forever when compared to just paying the dev fee? Maybe being able to run 4 hash boards- but you would need a custom case, power rails etc……

@locher6832 5 месяцев назад

Out there are boards (for example the amlogic board) that can't be flashed with Braiins OS. In this case you have to swap the board to an older supported version or to a BCB100 if you want to use Braiins OS.

@SPACEDESIGNWAREHOUSE 5 месяцев назад

I just talked to someone from their company and asked this and they said there’s no real advantage over the SD card; but it’s high quality components and if you need to replace a control board for some reason anyway, this isn’t more expensive and already comes with the firmware installed.

@paulgrep3193 5 месяцев назад

@@locher6832 not so since Braiins OS 23.10 you can install their firmware on Amlogic control boards. Just need to use Braiins Toolbox.....

@olivermccambridge3469 3 месяца назад

In your head! 😂

@RandomPlayer717 5 месяцев назад

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Hello.

@joe2197 5 месяцев назад

I neeeeeed help fixing my miners. Any ideas? Can I hit you up on Twitter or something? I have 3 s19j pros just chillin

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Come on over to the discord.. The link is in the description - @ me in the general-chat room

@SPACEDESIGNWAREHOUSE 5 месяцев назад

Or just say whats happening here.. Lots of miners will be in here over the next couple days, and Ill see the comments also

@joe2197 5 месяцев назад

It's too much to put into a RU-vid comment lol I just need haaaaalp lol I want to try and squeeze a little out of these ladies before the halving. Bear market blues broke my stride. Lost everything on Celsius. #alexsux

@NicholasJamesJohnson 5 месяцев назад

@@joe2197what’s your telegram?

@yvonnadeau2331 5 месяцев назад

@@joe2197 plug them in, get your ip and and put it in google and go from there. I don't think all three are broken. u probly just don't know how to see them.