Second Channel for small talks and side projects! We're building building a better life by living DIYfferent! Living DIYfferent mean being set apart and living a hands-on life.
That bus is definitely a challenge! I admire Doug's ingenuity. When they first purchased the bus it 'appeared to be nice'. Sadly it required major work so Doug's To Do List included yet another project. Eevee and Doug have such admirable work ethics. They are terrific role models. Belle and Maverick reflect their caring, hard-working nature. We need more people like this family.
I love the view behind you as you fight and defeat the superfluous rusty bus bits and pieces. This bus saving work is great to watch and wonder at. I love these impossible projects you accomplish ❤
Any progress is good progress! You're doing great, Doug, keep holding onto your dreams, and never let go of them!! Much Love and Hugs to you, Eevee and the kiddos!!! ❤❤❤❤
Well if anyone can make a silk purse out of a sows ear, it is Doug. I have watched you since Indiana, and with each new project there have been challenges which you have overcome. This new us will be fantastic when it is completed.
That’s a lot of rust to clean off 😮…. When you get it all fixed up and running properly again , this will feel like a distant dream…. And not the nightmare of a job that bit looks like right now !! 😫🤣. I’ve got faith in you !!!
For that to be so rusty, it sure is tough stuff!!! One of these days it will all be a memory & you can look at it & say “what a nice van/truck or whatever you decide to make of it. You work so very hard. Until next time. ❤❤❤❤
Wow Doug 😮 I was a little scared for you cutting that! Amazing what you are not afraid of tackling any tasks! It will be exciting to see the finished project. Much love to everyone 😊❤🤗
Great video. Thank you. My husband, Andy, would take on a project like this.. Andy is a welder metal fabricator as well as a mechanic and he enjoys a good challenge.
Great progress!! This is definitely a BIG job, but you've got this! By the way, Chris recommends the Walter, Weiler or Pherd brand cutting disc's (sp?). You have to get them at a welding supply place, and they're more expensive, but they last longer. Hope that helps! Hugs 💞
Doug, I'm always impressed by the diversity of projects you are willing to tackle. Where do you learn your skills from, or are you self taught? Are you going to be doing welding too?
I think you already mentioned it in a previous video, but I don't remember for sure -- but are you removing the lift permanently, or reinstalling it on the back of the bus? You don't have to bother with answering my question. I just seem to remember you saying you were putting it on the back, and I also remember you saying you were leaving it off, lol. If you intend to reinstall it, it would be more practical at the backend of the bus. Looks like your pond is branching out.😊 You guys be careful with the mosquitoes. With all the rain hindering outside projects, you must've felt like you were on vacation! It would feel that way for most people. But the way you two keep busy, you guys might have been miserable the whole time.😊 I hope not. Anyway, take care and enjoy whatever you enjoy most! Bye Doug and Eevee! Hi kids!👋 Bye kids! 👋 Have fun! H
One thing we can always say about Doug - he doesn't give up. That bus has become quite the challenge but he is determined and we know he has the ability to get it done.
Maybe when making the new curved rails, have them put a flange on each end, with 2 holes in them to bolt it back to the frame. This way you dont have to weld anything. Just get an exact measurement of the opening. Add a bit if the roof is sagging to bring it up level again.
It's a pity that I live so far away and in another country. I can roller those up for you in no time and weld them in for you. I usually buy those cut-off discs in 50 packs, but you can still get a fair price on the 10 packs.
Those cheap grinder blades suck they break all the time. I recommend getting the more expensive Dimond shard ones which are only like 15 bucks or so, but they will last you a long time. I am still using mine after I cut up lots of cinderblocks and rebar and rusty metal.
Doug do you think that you will need bracing in between the new bars. You are looking tired but if anyone can bring the best out of the van it is you and Evie.
What a chore this is! Ugh...But I am curious...have you or is it feasible, to turn this vehicle into an open bed hauling type vehicle? Not sure if your tractor, etc, would fit between the wheel wells, thats why I am curious.
if they have one of those roller benders they should be able to make those pieces for you , you could do it youreself bending them by hand , the bend isnt that severe ad the material not that strong if you put it in between two inmovable objects and push against the bar youll bend it just walk the material down between the objects and do it in small steps it be a little kinked but once the plating and stuff inside is over it noone will see
By removing those “struts”, are you not compromising the strength and integrity of the exterior frame, and if you close in the bus, by using anything but the same gauge and type of steel, won’t that be a weakness to that side of the bus?
@@jesusisGod1434 If it were my family, I wouldn’t want to trust a cobbled together frame on a 10K lb. automobile moving down the highway. If he doesn’t own a welder, then have it done by a professional. Then THAT begs the question, would the vehicle be insurable if the frame has been altered? I don’t think that Doug would ever intentionally do anything or use materials that would endanger his family. But still, I would think that cutting up automobile frames would change the integrity of the structure. Just something to ponder.
Doug, you are obviously Christian or you would not be so positive. Perhaps keep an eye out for a cheap plasma torch and a mig welder. You would be dangerous with them 😃😀. I admire your tenacity. A lot.
I know you want to take all the old metal out of it but bro I tell you taking a 2 lb sledge and beating the hell out of it I'd leave that stuff in there
Psalm 18:3 King James Version 3 I will call upon the Lord, who is worthy to be praised: so shall I be saved from mine enemies. Gods blessings over you . |Happy sunday.
My late husband worked in a steel fabrication shop; he'd look at this vehicle as a challenge. He was also a certified mechanic and rebuilt many vehicles in his lifetime and got great satisfaction taking something that wasn't road worthy and turning into reliable transportation. If it was made of metal he could fix it, so I guess it's all in the eye of the beholder.
you didn't read my comment earlier. get that box out and get another one from a junked bus. it will take you years if you do it the way you're doing it now.