CV Axle Replacement On An FJ Cruiser // What Breaks When You "Snap" A CV Joint? 

The best offroading/FJ channel, period.

I didn’t even have an fj but I still watched the video, repair videos are like cooking videos, I can’t cook but I still like to watch them lmao

You just saved me from disconnecting everything like the guy on A1Auto's channel. Thanks for producing this video. Btw, I think you torqued that nut to 175 ft lbs instead of 174 with that precise method of measurement you use 😜

This is THE best cv axil replacement on RU-vid

The lower control arm being able to be unbolted from the spindle without removing or touching the ball joint is the best engineering on a vehicle I've ever seen

Very informative Ken thanks again..

The other videos all showed removing everything. Thanks for this.

I don't own an FJ nor do I need to replace a CV axle but I loved this video

That sling was slick!

Just subscribed after watching a bunch of your videos. Keep up the good work!

You torque things on just like me 🤣. I was worried about Monday's video, because you snapped the axle and then commented about a possible future SAS and I was instantly disappointed thinking, Awwwwwwwwwwwe man, no video this Monday 😢. So this makes me very happy for the moment, I'm also excited for the SAS (if that's gunna be a thing). I absolutely love your videos/adventures Ken, keep up the good work!

Great tips on the cv replacement! You’ve mentioned the cv lasso before, bummer it’s out of stock, I was going to get one. A+ tech vid, thanks

Dude the lazo idea was pretty smart...kudos

Very nice instructional video for anyone who hasn't replace a axle yet. Never seen the rope pull trick so thank you. Normally just give them a pop with a crowbar. Great videos btw.

I just bought some axles for my 470 from 1A. The OG boots are cracked, no real splits yet. I think I will run them till the boots fail then switch them both out. Thanks for the video, looks like an easy job with the right tools.

Another KC job is well done. Keep wrenching brother.

I loved when you just hammered down the axle nut and then said “that’s probably about right” well played. Great video.

Great video. I just did this job after watching the 1aAuto how to video which made me disconnect the tire rods, and upper control arm nut (which is a b*tch to get off). I did have to replace my wheel seal so taking the knuckle off helped me get it in easier in that regard, but your video showed me that I don't need to do all that just to replace the axle itself. Thank you.

I own a solid axle Land Rover and I still watched this and enjoyed it.

Great instructional video. Thanks a lot

Awesome ......I needed this real world CV swap in a FJ format :) ......Great Thanks Sir ......now waiting for the SAS Vid :)))))))

I was all set to change out my axle i watched the video from A1Auto and made a procedure that followed the video there is 22 steps that is needed to complete this replacment now i happen to watch your video and its about 10 steps at the most thank you for the information it now looks like a simple job without removing the calipers and hanging them the brakeline bracket removal the ABS connectors removal as well as the knuckel and hub removal , lower controll arm and sway bar and tie rod. Cant wait to do this job now.

Super helpful. I'll be making a removal tool out of rope. I went the very expensive way. I bought RCV axles. I would suggest it. As they are 1100.00 each. But off roading and shooting is my only hobbies. So why not? Thanks Ken you sure simplified the task.

Haven't had to change one yet but, I've been dreading it...until now! You have made it much easier for me to do a CV axel replacement with your excellent pro tips, instructions and great video of how everything fits together. Thanks again Ken, you're like my personal FJ mechanic with all your great videos, I have saved them all for when I need them. Your channel is a must for anyone with an FJ! Great channel, I love it!!!

Excellent video. I’ve just started wheeling my 2020 TRD Offroad Tacoma. So I’m preparing for some CV replacements in my future.

getting ready to replace our cv axles on the '07 FJ. this video really simplifies everything down and good to know the brakes, rotor, etc, and all that don't need to be removed. great no nonsense approach for a quick fix at home or on the trail. appreciate your you tube feed a lot!!!

Thank you for showing us how to replace cv axel you are the man. So glad you decided to include more of these type of contents also on your channel this really will help you reach out to different type viewers I'm sure. Thanks again sir, hope to see more be safe and Happy trails!

Hey Ken, always welcome your repair knowledge and the clear video images your produce, thanks! Congrats on tipping the 4K subcribers mark too! Looking forward to your efforts upgrading and your future adventures. Enjoy!

i liked the lasso tip never thought of it thanks :)

This was probably the best DIY video on cv replacement I've seen. Super easy ( except getting that pesky axle back in). I've even referred back to it as a refresher. Many thanks. Keep it up. Love the new build as well

Thank you! This video is going to come in handy this weekend! I have to change my driver side CV. Super awesome FJ channel, glad I came across it.

I always look forward to your videos. I changed passenger side CV Axle yesterday on GX 470. I had trouble getting the axle out and going back in. You make it look pretty easy, but you're a big guy that can manhandle things better than I. Ended up my OEM axle was broken when I took it out. 227K miles, it was probably due, I was mostly concerned about the torn boot so....what the heck, change it all. Glad I took that route now. Your video is what I used as my reference, I am extremely grateful for this video, thank you! Looking forward to seeing the solid front axle swap on the trail...I've had this GX470 since February and bought it as an extra vehicle to tow behind motorhome that is off road capable. It checked out in remarkably good shape and ready for dirt, but I'm not as daring as you off the road. It's still mostly stock but will upgrade as replacements are necessary

Great work! I’m doing this tomorrow so your tips and tricks are super helpful!

Hey Ken! awesome approach to the CV axle replacement, used all your pointers and successfully switch out both axles on my 2007 FJ. You were correct, could no longer find the CV Lasso tool, but went to my local Lowe's and got 6' of steel plastic-coated wire with 2 mini wire cable clamps, less than $10. It all worked out like a charm. Thanks a lot!

Nice tutorial.👍

Like kens video. I just did my cv's. Just like to add to this,that if your at home and not on trail,order a clamshell bushing for drivers side. I just installed one,it was a yukon,Yukon, east coast gear supply has them,so do few other companies. Like I said,I understand if out on trail,but if ya know you will be doing at home,order one up!

How come I can’t like this twice 😉

Great instructional video. Just how I like them. Thanks man!

Solid tutorial! Thank you!

What CV axle did you get to replace the broken one? I am going to need to be replacing mine soon and wondering axle to buy. Thank you. Great video as always. 👍🏻🙂

Great video! Thank you sir!😎👍

Easier than I thought it would be.

I am a hardcore Jeep guy 👍 However I am very interested in your SAS AND can hardly wait to see your FJ on live axles Your gonna love it 👍 It’s a while different animal We are gonna love it too New sub here

Great video. Thank you.

I just seen another videos that removes the engine lol jk but removes way more .. im so happy i found this video 🤣

GZILLA sells one of the cv lasso tools good video. only thing i would add is when installing have the inner circlip on top of the cv

Can you share the link for the jack stand? It is quite useful.

Wow, your skills are very impressive. Can the baring cage be replaced, like rebuilding the cv? Or is the new cv pretty much the only way to go? The sas will be a big change

Thanks Ken for the instructions, I’m changing axle in my 07 FJ only driver side, it’s that ok to do only the one is bad? Magnificent video.👍

Great video! You sure made that look easy and I’ll definitely point people to it as reference. You mentioned upgraded cv axles, I’ve heard that doing that puts more strain on the differential and makes that the weak point vs keeping the weak point on a fairly easily replaceable part (as you’ve shown!) what are your thoughts?

4th gen 4runner is the same right? I’m just watching this in case I ever need to do this lol

This why I hate IFS suspension ,I will stay with rigid axle forever 💪.

Oops off to Auto Parts Store to get a New Dust Cap without a hole. ; - ) How many times have you replaced the CV in that FJ?

I have a stock GX470 with a torn inside CV boot. What brand of CV axle have you had the best luck with and where did you purchase? Love the channel and enjoy your technical points...especially when you're doing something for the first time! The axle swap's are going to turn your FJ into a even more of a BEAST!!

Hey,! You mentioned going to a solid axel or something? Are you getting a new vehicle soon or converting?

Great video, thanks for simplifying the process. Do you use OEM CV shafts? I've heard that aftermarket ones don't last as long.

Great video. Replace axle 10/10 put hammer in to rope 0/10 😝 7:35

Again, Thanks for helping all of us out with trail repair instructions. I've got a question for you. Are 16 inch channel locks big enough for removing the inter tie rod? Cuz I have those. But I saw a tie rod removal tool for 35 bucks. It's basically a long handled open end wrench. Don't want to buy one if big channel locks will work. Thanks.

Great video! About to do mine. Question: where did you get the new axle from? Is it Toyota? Or aftermarket? What do you recommend? Thank you

The spindle arm threads are an M16 x 1.5mm thread if anyone cross threads them... I had to run a tap through mine from the shop that did the original install. Axle threads are the same huh, that was smart of them. Which CV brand did you have in there that broke? How many miles did you get with it? What brand did you replace with? You also said IF you were to stay with IFS, does that mean you're selling the FJ?!

Great instructional video on cv axle. Definitely a must watch and to know when out off ok a beaten path. You're steps are very simplistic and easy to understand. I now carry with my recovery gear a spare cv axle and specific tools required to replace a cv out on a trail. Keep up the great work and see ya out on a trail! IG @fj_rey

how much of a benefit would it be to just get that cage from RCV do you think? If they would even sell it which they probably wouldn't. I don't feel like spending $3k on a couple axles at the moment though which is what it costs for my application

I’ve watched this when I did it for the first time and everything went smooth, now doing it for the second time everything went smooth even putting the new one all the way in, but the 2 bottom bolts now won’t line up! Is there a trick that I don’t know about? or did they give me the wrong part? The length seems off on this new axle I can’t line up or screw the 2 bottom bolts at all. Opinion? Thank you!

Jam a giant prybar between two lugs and the ground to wedge the hub in place, then you dont need anyone pressing the brakes.

Does that bottle jack fit in the OEM jack compartment? Also, I would double check the front diff fluid. When I swapped my CV, I had it lifted on its side and it still leaked a little.

I’ve gotta do the same thing this week lol I have a question. I lifted my front up and spun the tires on both sides. The right side didn’t make any noise but the right side make a light ticking noise when I spun the wheel fast enough. Any thoughts on that noise?

I use Lotus Devolpmrnent upgraded axles. Its kind of like a halfway point between an OEM and RCV axles. I think RCVs are overkill for the front clamshell. Will we be seeing a SAS series?

Did you replace that CV with one from an auto parts store? I was reading some people have binding issues just wondering if you have had any issues?

Hey I have moderately built FJ 2010 with 2.5 inch lift. I need replace my cv axles due to a ripped boot. Curious if you’re running stock cv axels? And if so do you think they’re up for the challenge with the slightly higher angles with the lift?

I hope you bought a new bearing to rebuild the original part and have it as a spare. The original CV axles are superior to the junk metal used to build the aftermarket parts.

Did you remove sway bar link for this job, because i didnt see it on the video?

Great video!!! Where did you ever see that lasso used before?? Like 3 times on the trail????

There is no sway bar / link on your truck. If there was would you need to remove it?

just orederd this CV REMOVAL TOOL from GZila Designs it look the same as your sling .

Fg👍👍👍💯

13:15...........................rattle rattle rattle.....................clik,,probably about right..............still laughing

I'm pretty sure the axle nut on my 2010 is a 36mm

it broke because you have 45 degrees on a 30 degree tool..its called stress fracture,,,,, BANG. i dont understand,even on cars,driving around on flat roads,they break,then they put them in 4x4rs.???..mental.

174ftlbs.......that's probably about right!! LOL.

???????????....WHAT. .....there goes a truck over there,..............???????......WHAT.