Тёмный

Dacia Duster Facelift Towing Hook Installation Tutorial 

Duster Cool Travels
Подписаться 46 тыс.
Просмотров 82 тыс.
50% 1

Опубликовано:

 

28 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@MrEu4ik
@MrEu4ik 2 года назад
I just bought and got it at a Dacia service a few weeks ago, it's a bit expensive but it's worth 100%. Quality materials, super strong and super aesthetic and easy to mount/dismount.
@an_ominus
@an_ominus 2 года назад
One of the most useful video
@monstro01
@monstro01 Год назад
IS it needed to put off battery as mentionned in the kit ? Thank you 😊
@gablan1468
@gablan1468 Год назад
I can't believe I have to remove so many things just to put a simple towbar 😀 I got myself a second hand towbar for about 50€ and will try to mount it on my Duster I, hoping I will not have to take out the entire rear side of the car.
@przemeku.9894
@przemeku.9894 2 года назад
it is possible to install the hook and install the harness without removing the rear bumper. The greatest difficulty is removing the plug and pulling the wires, but it is possible. I did so.
@mickbryan7716
@mickbryan7716 2 года назад
my question why couldnt this be installed during manufacurting pay when you order
@FahadBanjar
@FahadBanjar Год назад
Dear i have Renault duster 2021 4X4 2,0L. My question is can I install it on my vehicle or is there a difference in it part?
@DusterCoolTravels
@DusterCoolTravels Год назад
Hello, yes, you can install it on your Renault duster , just have to make the same adjustments I did 😁
@Husky_Passion
@Husky_Passion Месяц назад
lol mont the car on the hook, it's faster than dismantling every single screaw of the car and then mount the hook
@anthonyomahony6257
@anthonyomahony6257 Год назад
No need to remove the bumper, this guy only did this for demo purposes. I bought my Stinehof towbar and wiring kit for €225.00 in Republic of Ireland. Need to bring an ignition live to the relay, this no problem if the cigar socket supply in the boot is ignition fed,otherwise you have to take it from the fuse board in cabin using a Piggyback fuse tap.
@cfeesh5422
@cfeesh5422 3 месяца назад
There's a wire already in the loom to supply the tow bar electrics
@anthonyomahony6257
@anthonyomahony6257 3 месяца назад
@@cfeesh5422 Yes,,,you are right about that. I still put a switch on the line (in the trunk) as I did want the relay constantly supplied when no trailer connected. I put a 10 amp fuse into the spare space in fuse block marked trailer. That feeds the red wire inside the trim in the trunk on the left hand side.
@cfeesh5422
@cfeesh5422 3 месяца назад
@@anthonyomahony6257 fair approach!
@chrishart8548
@chrishart8548 2 года назад
Does this car have no bumper reinforcement beam ? Just some plastic and foam ?
@DusterCoolTravels
@DusterCoolTravels 2 года назад
Exactly. The bumper is only to dissipate force on impact. Is made like this for the pedestrians😁.
@chrishart8548
@chrishart8548 2 года назад
@@DusterCoolTravels some vehicles have a reinforced metal part others don't. I can't imagine the cars with just foam and plastic could survive even the smallest of bumps
@DusterCoolTravels
@DusterCoolTravels 2 года назад
@@chrishart8548 i guess the duster is made this way in order to increase protection for frontal impact with a pedestrian, because it doesn’t have other safety features for that area😁
@chrishart8548
@chrishart8548 2 года назад
@@DusterCoolTravels I was talking about the rear bumper . Any pedestrian getting reversed over is probably done for anyway.
@paulpotorac
@paulpotorac 2 года назад
Some unnecessary things were done : 1. removing the boot protection ( from the lip, inside the trunk ) 2. removing the protection on the right side of the car 3. removing the spare wheel Also, some neccessary things needed to be done : 1. clear the protection ( wax ) on each side, under the car in order to have the towing bar alligned correctly and reapply the protection after it's installed 2. didn't see if they put the spacers ONLY on the right side of the car, for the towing bar
@EladSi
@EladSi 2 года назад
What is the part number please?
@DusterCoolTravels
@DusterCoolTravels 2 года назад
Number of the part ?
@EladSi
@EladSi 2 года назад
@@DusterCoolTravels is that towing hook a genuine Renault part? If so, what is its number?
@DusterCoolTravels
@DusterCoolTravels 2 года назад
It seems to be an original Renault part but I can’t find the number . magazin.darex.ro/magazin/carlig-de-remorcare-demontabil-dacia-duster-ii-cablaj-7pini/ this is the link from the dealership store
@loser_one
@loser_one 2 года назад
Part number is on the page : SKU 7711785309
@paulpotorac
@paulpotorac 2 года назад
For which component ?
@Husky_Passion
@Husky_Passion Месяц назад
foutage de gueule
@DusterCoolTravels
@DusterCoolTravels Месяц назад
Why?
Далее
Duster 4x4 Offroad Suspension Lift Kit Upgrade
13:35
Просмотров 60 тыс.
Always Help the Needy
00:28
Просмотров 12 млн
На самом деле, все не просто 😂
00:45
Totale Idioten bei der Arbeit mit der Kamera gefilmt
30:02
DACIA DUSTER TOWING HOOK INSTALLATION
15:26
Просмотров 6 тыс.
Dacia Duster II Schmutzfänger Tuning
11:07
Просмотров 33 тыс.
Cheap vs Expensive OFF-ROAD
14:18
Просмотров 1,8 млн
Tow Bar Installation with Wiring Kit - Suzuki Vitara
9:49
Dacia Dokker Anhängerkupplung montieren
13:34
Просмотров 25 тыс.
Come ho camperizzato la mia Dacia Duster 4x4 EP.1
14:46