Darth Vader Sealcoating: Full video 

Here is the full version of the short I made for Halloween. The previous sealer had done some patch work, if anyone is wondering what those dark spots are. And with the small oil spots, a good wire brushing will take care of them. Let me know in the comments if you have any questions. ✌️
If you would like to start your own sealcoating business, and live in North America, email me: SEALCOATINGISLIFE@gmail.com
00:00 Weed Wacker
00:41 Blower
01:25 Prep
01:53 Hollywood
02:29 Sealcoating
16:30 Finnish
17:27 Darth Vader
17:46 Before and After
The product we are using is: Asphalt Emulsion
What is an asphalt emulsion?
Asphalt emulsion is a combination of three basic ingredients; asphalt, water, and small amount of an emulsifying agent.
Why use asphalt emulsions?
Asphalt emulsion does not require a petroleum solvent to make it liquid and in most cases asphalt emulsions can be used without additional heat. Both of these factors contribute to energy savings. Additionally, asphalt emulsions offer great flexibility in their application since they offer the end-user a great variety of characteristics not found in other paving and maintenance materials. Asphalt emulsions are environmentally friendly. There are little or no hydrocarbon emissions created with their use.
-www.aema.org/page/basicsofasp...
What is SEALCOATING and why should I do it?
1. Sealcoating protects and prolongs the life expectancy of asphalt pavement by filling surface damage and providing a protective layer to keep out damaging UV rays, vehicle fluids, and water.
2. The low cost of regular sealcoating can save you money in the long run. A properly maintained and sealed asphalt surface has an extended lifetime and reduces long-term repair costs.
3. With exposure to the elements, asphalt pavement over time becomes faded in appearance. A fresh sealcoat application enhances the appearance of asphalt, making it look and wear like new.
4. Sealcoating is typically done using one of two application methods: spray or squeegee/brush.
5. Sealcoating accelerates the melting process of snow and ice on pavement surfaces. This helps to protect against water penetration, rain, frost and snow damage.
6. To correctly complete the sealcoating process, the air and pavement temperature is recommended to be at least 55 degrees Fahrenheit for the duration of the application and for eight hours following the application.
7. Prior to pavement sealing, the asphalt surface should be cleared of all dirt and debris. In addition, minor repairs, like potholes and cracks, should be filled and vehicle fluids, like oil, should be properly removed.
www.wolfpaving.com
#sealcoating #driveway #RU-vid #outdoors #diy #sealing #pennsylvania #oddlysatisfying #satisfying #drivewaysealing #paving #homeimprovement #homemaintenance #curbappeal#starwars #halloween #darthvader

Развлечения