This is a video that should help you disable you're daytime running lights for an HID kit install or just for appearance purposes. Have any questions? Email me at Willisjason87@yahoo.com
Thanks man for this Video! So difficult to find info for my 2006 Eclipse on the net! This resolve the new LED headlight flickering problem on DRL wihout need of extra capacitor/relay device. Thanks and keep this video online it still help people!
As a professional pimp, I am proud to say that this push in method worked perfectly on a 2005 galant es. Thank you young man. Next time you're in springfield, I'll be sure to give you a 50%off sale from my fine selection of vacuums. They blow really good!
Ok just going to put this here a little list of cars, that people SAY it worked on: * Mitsubishi Eclipse 2006-2012 * Mitsubishi Galant 2004 * Mitsubishi Lancer LS, DE, ES 2002-2008 (They have the same ECU just in red or black) * Mitsubishi Endeavor 2008 * Mitsubishi Outlander At least for me it worked, in my 2006 Mitsubishi Lancer ES. If you want to try it just follow the video, if it doesn't work for you, just pull it back, no harm done. Thanks man, much better idea than cutting it of or bending the pin! Hope this little list helps everyone.
I bought a black 07 Eclipse recently that looks new, the only fault was the headlights were awful & ruin the looks of the car. I followed your instructions to rid the daytime running headlights & everything works great when you use the key to lock & unlock the car where the lights blink & horn sounds. I bought new headlights for both sides & this makes the car look awesome.all shined up. THANKS Jason for taking the time to make these videos to help us shade tree mechanics.............
After replacing the brake pads on all 4 tires my 2006 Endeavor's DRL WOULD NOT TURN OFF - this was the only fix and a very welcome one! Thank you fine sirs!
Thank you 🙏🏼 Jason! I have a 09 Galant for about more then two yrs & one thing that I hated about the car was the daytime running lights! With your knowledge I was able not only get rid Of the DTRL, but all so pro-long the life of my LED lights that I had just bought couple months ago! An the 1 thing I would like to comment about is I wish you would have zoom in where the plastic clip is, w/a better video quality. Thx.
I just bought my daughter a 2011 spyder gs with factory hid lights and they suck so I'm replacing them with the spec d ones and installing hid in low beam and leaving halogen in high beam.my question is can I connect led strip and halo's to that pin on ecu or pin removed?
Thanks for your video. Have 2 questions : 1 will work on my mitsubishi Endeavor 2007? and 2nd question: If I cover the terminal with electric tape will work? (so I dont have to push it? let me know thanks
Thanks you so much you help me how to fix my Mitsubishi Lance 2005 ECU 1 question if I want to buy ho new sets ECU for my Mitsubishi 2005 and replace that can I do dash please let me know yes or no thanks 😊
I have a question I did this exact procedure to my 4G GT eclipse and I cant have the the my halo rings on without the daytime running light. my objective is to just have my halo rings one without the daytime running light. like you did when you turned on accessorie mode.
Hello guys, I have a Mitsubishi endeavor 2004 , the door ajar don't turn off even if all the doors are close. And the other hand all the switch tested positive. Can you help me with the matter. Thanks by advance.
How you doing I saw your video and I was wondering if you know how to turn off the daylight running lights on a Mitsubishi Lancer 2008 I had the same problems with my HID lights they keep blinking
How do yall adjust the spec d projector headlight in our 4g eclipses because the adjusters.are in awkward hard to reach place. The only way is to adjust with bumper off.but u can't get it just right
I have a question about the HID's. I ordered a pair of those aftermarket headlights for my 06 eclipse. I also ordered a few different pairs of H1 HID kits for the projectors. Neither kit came with the plastic housing to connect the HID kit to the factory wiring harness. I've been informed by one of the ebay sellers that they currently don't make a housing for H1 bulbs to fit my car. Is this true? Have you installed a set of HID's on a 06 model eclipse and if so what did you have to do to make them work? If you can help me out I'd really appreciate it.
I know this is an old video, but when I did this on my 2012 eclipse someone I knocked out all my lights plus my radio. I did exactly what he did. When I turn my car on my headlights no longer work at all and my radio is completely dead. Anyone have any idea why?
very good video....but I have a question..I bought my daughter a 2012 eclipse and the back up lights do not work, I have checked the fuse and bulbs..I hear they have had problems with the back up switch..I see the switch for sale on e bay, but I cant find the switch on her automatic trans...where the heck is is?? shows its a two wire switch...but its not the same on her 2012...thanks..can you help me>>
I got an 07 Galant a few weeks back, I did as you had suggested/instructed and it works, the problem is I think I pushed the pin to far down to where it turned off the regular headlight part. So all I'm left with is the side lights and the High beams, and suggestions to help get it back to using the headlights normally? ?
What if I just cut the pin out so that there isn't any contact? I'm kind of having trouble doing this and figured I could just cut the pin out. I would just like to know if that would be a big issue or not. Please please please reply
Disabled the DRL on my Mitsubishi Galant 2004 thanks to your video. Is it possible that this disabling drains my battery? Could not start my car twice today !!
Does this actually work because my problem with this video is that he turned the car on and no daytime light but the daytime running lights in my 2011 don’t turn on until I put the car in drive so that video really didn’t show me anything because he didn’t put the car in drive and I don’t want to ruin her.
Do you know if this will work on a 2008 Mitsubishi Endeavor? I have HID lights in and I don't want to leave my lights on all the time to prevent them burning out and I'm in the process of installing projectors and Angel eyes and I don't want the bulbs to always be on and over power the eyes.
im sorry i cannot say if they work or not :( only thing you can do is try, just bend the male side of the pin instead of de pinning the female side, that way you can put it back if it doesnt work
Silly question brother. Tried to write email but says your no longer with them. Anywho, have a 4g with these headlights. Would like to put in my rbg Bluetooth LEDs in the projectors. Would the headlights have to be removed in order to put them in? Also once in do I still need to use the rubber boot/dust cap? Thank you In advanced my friend
yeah i would definitely remove the lights to work on them. It will be much easier to work on them off the vehicle. If you watch my headlight install video that will show you how to remove the lights.
Does anyone make like a pass-through, pin extension for the CPU, combine that with a pass through harness so like a patch harness so you can wire up any old switch to any old thing that would be really slick. There's got to be some OBD2 software that,?
Thanks so much I have a 2006 GT can you please do a vid on a Aux mode for the car.. I have the Rockford System.. I want to make a jack or something for my iPhone so I can play music. There are some videos on RU-vid and there not that good about the install .. Thanks for taking your time
It's super easy. you just remove the front panel, remove 4 bolts and pull the radio out and there's a plug you pull out and the paperwork that comes with the kit had clear instructions on where to insert the wires. Only took an hour or less to do.
The 2011 eclipse gs sport box is actually facing the other way as compared to this video it shows the text on the box facing the drivers side, but on the gs sport 2011 the text is facing the passenger side. So you probably did the wrong pin
No it's not normal. I have a 08 Eclipse Spyder GS and mine has never made any kind of noise like that. That sound usually indicates the starter going bad.
@@4GEclipseHowToACI is there a way to have the dog lights work when you first turn the knob? Like, before you actually turn on the headlights? I’m will try this procedure in my 08 GT this weekend. Wish me luck!
I need the opposite I want my tail lights to come on when I start the engine v whether or not I delete the drls I need my tail lights to come on, I've gotten pulled over twice late at night.
you may not have foglights..... if your car did not come factory equipped you wont have a switch for fog lights, not sure what that has to do with this video though