DBXLE 2.0 XLX2 with 800kv Sensored motor.. that spool...

Подписаться 73 тыс.

Просмотров 9 тыс.

50% 1

Well as yet another interesting run LOL and that spool just didn't workout. Links below for all the stuff in this DBXLE, Take a look and use the links to help support Exocaged RC, Thanks
Losi DBXLE 2.0 Pre Order for the newest version with a better stock radio..sorta..
Amain bit.ly/3zz97xc (Red)
Amain bit.ly/3DEQQAV (Fox)
Horizon bit.ly/3kPpTlo ( Pre Order )
Castle XLX2 ESC with 800KV motor ( This will be my combo )
Amain bit.ly/2Tur3Zz
Amazon amzn.to/3yW3fgi
Ebay ebay.us/d66CMG
Proline Masher X
Ebay ebay.us/UtViDk
Horizon bit.ly/3yCbn5I
Proline Badlands MX43
Amain bit.ly/3AI6Job
Ebay ebay.us/V2Wn8J ( ALL 4 )
Horizon bit.ly/3jzj6No
DGI 1" Wideners
Ebay ebay.us/oyH3q8
Center Spool
www.davesmotors.com/vertigo-1...
Vitavon parts for this magnificent beast!!
Steering Hubs/Knuckles ebay.us/AshI04 (Black)
Front Bulkhead ebay.us/IafgD2 (Silver)
Front Bulkhead ebay.us/PxZrCH (Red)
Center Transmission ebay.us/syFnlP (Silver)
Center Transmission ebay.us/xyD9zb (Black)
Rear Hubs ebay.us/4GMKF3 (Black)
Chassis Supports ebay.us/SGqXIU (Silver)
The ReefsRC Beast Servos
Beast 1000 www.reefsrc.com/shop/p_265587...
Beast 2000 www.reefsrc.com/shop/p_265588...
Hobbywing Max5 ESC
Amain bit.ly/2VGxsC1
Amazon amzn.to/2VB4eoE
Ebay ebay.us/s9jyJ0
Flysky GT5
Amazon amzn.to/3iz6Jk9
Ebay ebay.us/I6ukB0
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc

Развлечения

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@GrimJerr 2 года назад

Didn't realize the scale until I saw it stuffed on that shelf, what a Beast !

@ExocagedRC 2 года назад

It’s a big one

@ryano8613 2 года назад

The flip is that creature looking thing watching you?? Wow.

@teamsargentrc6399 2 года назад

Over powers The Xl Beast & it brakes it. Dang that was a great bash though... 55.6 psss on grass Wow. Getter in & back out... 🤜🤛👊👍 great job Great video Joe...

@johnboy6955 2 года назад

Man that thing is a dirt slinging monster.

@ExocagedRC 2 года назад

lol yeah it sure is.

@theirishaxe9405 2 года назад

Dam the amount of pressure that had to go through that spool wow!

@ExocagedRC 2 года назад

Yeah it was a serious shock load to bring the front up.

@Houleigan 2 года назад

Wow nice damage on that spool! Love the Exoplex, just looks like a great place to RC! Keep up the great work!

@ExocagedRC 2 года назад

Thanks man!

@JustCallMePCra 2 года назад

Honestly... I'm surprised it broke. Maybe it was already messed up from the 5 cartwheels from the last video lol

@ExocagedRC 2 года назад

LoL it’s possible! 😂😂

@GoKaioken 2 года назад

Some awesome awesome driving on the sand!

@chriscottell6854 2 года назад

I bet that's now a heavy beast.

@ExocagedRC 2 года назад

Yeah it’s heavy out of the box! LoL

@jhawk1985 2 года назад

That pin said nope.... not today 🤣

@jdpasltrains 2 года назад

Awesome location for bash!

@ashleyb4750 2 года назад

Been waiting for this video this thing is awsome!

@WillB.6759 2 года назад

Impressive

@gonzodetroitify 2 года назад

Excellent work Joe😎 and castle system did very well tho not sure why the log readout was different to Fluke😳🤓

@old-rcplane-phart 2 года назад

Always gotta have a 'give' point! Like ppl putting aluminum everywhere on their rc vehicles. Always GOTTA break at the weakEST point.

@ExocagedRC 2 года назад

I like aluminum but on any basher I gotta at least keep the arms flexible.

@samoanpride753 2 года назад

Epic!

@bhegg 2 года назад

Great run. Ooof those parts prices!! Gotta pay to play! I'll stick with my 1/10th scale for now 😄

@ExocagedRC 2 года назад

Yeah buddy nothing is cheap about 5th scale

@surfside75 2 года назад

Having the same issues with diff pins in my Mojave snapping all the time, especially the rear but also the front. Going back to stockish oil weights in all my diffs.

@chrisryder4709 2 года назад

That's ABSUGULOOOOLY AWSOME ! , WISH I COULD AFFORD TO DO THAT , I'm doing it to the x Max right now , I love my dbxl , I put mad Max tires on it , by the way ,,, do you ever sleep 🤣

@CindyCThys 2 года назад

That thing is bad ass

@ExocagedRC 2 года назад

Thanks!

@Tacklefinlures 2 года назад

Lol… mine is in the mail. 💯

@jasonice1584 2 года назад

I hope I can have one one day

@old-rcplane-phart 2 года назад

Now for a good quality esc. Anything but 'castle creamations'. 😁

@ExocagedRC 2 года назад

Oh no no, they fixed those issues and the Max5 couldn’t keep up with amp demand.

@WillB.6759 2 года назад

Ouch!!

@Blueknight1960 2 года назад

I installed the locker the other day, today I took it out for a test run. No jumps other than uneven ground, it bent both rear shafts. Maybe they bent because of some flips, the small jumps or the wheelies. But putting the locker in sure as hell put some pep into it's step. I don't do big jumps, I'm not good at it and it just cost me a lot of money. Edit: With the normal center diff, I hit 57 mph on grass. As soon as the rears shafts arrives, I'm going back to the grass field and speed test again to see if the locker does anything for the speed. Also the hesitation it had and loss of power seems to be gone since I installed locker. But it remaining installed remains to be seen if it keeps bending the rear shafts or any other shafts, it'll be gone. 1) Max 5 esc 2) Leopard 58113 870kv motor 3) Atop all aluminum diffs and mounts front and rear 4) Pro-line mx 43 wheel w/ 120lb braided fishing line to control ballooning 5) 18t pinion/46t spur Testing was done using zeee 9000mah 100c 4s batteries x2

@nofreerides7033 2 года назад

Probably the baddest one around yet 💪💪💪

@onemansvideos2134 2 года назад

Almost 500amps...probably never see that much on a max5 with the 300amp limiter a reason why castle is king 🤴 when you want to get full potential of your dream rig

@ExocagedRC 2 года назад

Yeah the Max5 couldn’t keep up with the amp loads

@rkstone1467 2 года назад

Would a wheelie bar keep it from going so far back ?

@bachirbattache2997 2 года назад

That spool or stub axles 🤷🏻‍♂️ good choice for the center diff even if i don’t like more than 500k Wt in it, you will brake something for sure but its all about fun 🤩😉 what works xith the Xmaxx doesn’t work with the Dbxle 2.0 .

@ExocagedRC 2 года назад

Very true!

@RTmadnesstoo 2 года назад

Was it still doing wheelies at the end? I looked like you were punching it pretty hard just before the motor quit.

@ExocagedRC 2 года назад

Yeah it was getting wheelies with the center diff. I’m going to drop down to a 20t and see if that helps with heat a bit.

@meanf1502 2 года назад

Is that vitavon center diff

@3SonsRC 10 месяцев назад

Masher X vs Badlands mx57 vs MX43's vs Duratrax Lockup on Dbxle? Strengths and weakness of each??

@ExocagedRC 10 месяцев назад

I busted the Masher X’s with it. I haven’t had the MX57’s yet and I’ve busted beads on the Duratrax with less vehicle. For me it’s the Proline MX43. But I haven’t had the 57’s yet.

@jameslyons1978 2 года назад

Shouldn't be overheating like that?? What's the fix, surely not letting it rest every 5 mins? I only ask as I'm thinking king of getting an xlx2 combo for a 5b I'm building... Great content as usual

@jaybee6695 2 года назад

probably geared wrong for the big tires/sand plus he could be running a better fan set up.

@ExocagedRC 2 года назад

Yeah fans aren’t the best, probably drop a couple teeth on the pinion too. I don’t really need all that speed anyways.

@Dos_Rc 2 года назад

Your not getting exesive load from the esc?

@ExocagedRC 2 года назад

Not since the updated firmware. Plus I think I’ve got the punch at 10% limited.

@Dos_Rc 2 года назад

@@ExocagedRC I’ll try that if I get the excessive load error on mine putting the punch to 10%

@jgarcia690 2 года назад

Any aftermarket aluminum parts are usually not tough at all

@ExocagedRC 2 года назад

This was probably a bit soft for this application.

@daviddobson20 2 года назад

Looks like you have to drop down to 20t pinion gear.

@ExocagedRC 2 года назад

Yep that’s the plan.

@Patterson66 2 года назад

Shit I think the diff pulling wheelies better than the the spool anyways

@slysplasteringsly1012 2 года назад

Chop that tree my friend. It's not a nice tree .

@Dos_Rc 2 года назад

I just sent my 800kv motor to castle it lost its sensored capability

@ExocagedRC 2 года назад

Really? That’s odd.

@Dos_Rc 2 года назад

@@ExocagedRC Yeah man I was t even jumping it when it happened I was just ripping around in a park maybe a faulty motor from the start I own 3 xlx2 two 800kv amd 1 1100kv Only one burned up it it used to be on the Losi dbxl e right now Iam running a MMX8S and it’s plenty powerful but eventually Iam gona put the xlxl2 back in it 😝 By the way I love your dbxl e videos as well as the crusher Kraton , outcast and XMaxx I have all in my collection

@silly_d_williams2167 2 года назад

Basher don't really use sensored tbh it's more for racing... Hope the take care of you 🍻

@KalsRcAdventures 2 года назад

That was a bad idea from the start I wanted to say something about that when u install it. But didn't want to become a hater. Bashing gonna have to have a diff or slipper if that has one or other . But no one wants to listen 🤦🏾‍♂️🤷🏾‍♂️. But y'all keep complaining why my input and diff gear broke cause u doing jumps with a spool 🤣🤣🤣🤣🤣🤣

@ExocagedRC 2 года назад

😂😂😂 some of us have to learn the hard way.