Debunking the Motorcycle Kill-Switch Mystery | MC Garage

Подписаться 926 тыс.

Просмотров 999 тыс.

50% 1

Does it matter if you shut your bike off with the key or the kill switch?
--
What’s the right way to shut off your bike-with the key, or with the kill switch first? And is there any harm in doing it one way or the other? While you may think this is a silly question (we certainly did at first), it turns out there are loads of people concerned about this very topic. So whether you’ve never considered the subject or you think about it every time you shut off your bike, we’ll get to the bottom of things in this video from the MC Garage.
Read more on Motorcyclist: www.motorcyclistonline.com/mc...
Subscribe: ru-vid.com...
Motorcyclist Shirts: teespring.com/stores/motorcyc...
Shop Products We Use: www.amazon.com/shop/motorcycl...
See more from us: www.motorcyclistonline.com/

Авто/Мото

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2 тыс.

@JpOcDenver 6 лет назад

About 9 years ago I accidentally hit the kill switch on my gixxer with my left hand/wrist while reaching for throttle (right side) to maintain highway speed, while i tried to zip up a pocket with my right hand. (make sense?) It was 2am and pitch black. I had no idea what had happened as the bike came to a stop. I tried to start it probably 20 times. I knew i had fuel.... The engine was turning over.... WTF??? Eventually called a friend to pick me up and left my bike hidden in some bushes on the interstate. Went back the next day and tried again to start it about 5 times before i flipped the kill switch just out of desperation. I've never felt so stupid.

@BrutalUKYT 6 лет назад

RoadRunner I was on the twisty bends in middle of npwhere and my tankbag hit the kill switch I thought throttle cable snapped never have I felt relief after spotting it

@gilangrr21 6 лет назад

Lol its that stupid moments that make a good story tho xD

@asozialesnetzwerk7863 6 лет назад

Knechtmetal Honking with the start switch is just as stupid as starting the engine with the horn switch...

@mvl71 6 лет назад

RoadRunner I usually hang my helmet from the handle bar when I'm taking a break. I got so far as removing the tank, the spark plugs, the battery, and was about to give up hope and call for a pickup, when I spotted the kill switch, switched to _off_ Thanks, helmet. That was really stupid. Luckily there was nobody around to laugh at me.

@mjordan812 6 лет назад

BTDT - but on a kick start only bike. I was repositioning my hand and bumped the switch. Took about 10 minutes for the fog to clear.

@jdhaggard562 5 лет назад

If I had a dollar for every time one of my friends or family members called because their bike would not start and they hit the kill switch and did not realize it... i would have like 9 dollars.

@mrsotko 3 года назад

yep, I'd have at least forty-five cents.

@ShelBelSapphire 3 года назад

That's a lot of dollars.

@jimmyneutron5679 3 года назад

mate I once pushed my bike all the way to my parents house because I did not realize.... Thank god it was a 125 xd

@montlejohnbojangles8937 3 года назад

I've done it to myself a few times. But then I only ever turn my bike off with the kickstand, so it's typically only after somebody else has ridden it. 🤣

@markfox1545 3 года назад

'Like $9?' How many is like 9? Do you mean 9?

@cbro412 5 лет назад

I use the kill switch first. Especially at night because I can have my headlights on when I'm parking my bike in the dark. If I use the key, I won't have headlights.

@carlloud1187 5 лет назад

I use the kill switch first, then the key switch. Never thought about the fact you turn off the lighting when you use the key switch. Thanks for bringing that to my attention. You can learn something new everyday.

@nunyabusiness896 4 года назад

You’d probably be better just leaving it running while parking so you’re not discharging the battery. Also gives your engine a few more seconds of coolant and oil circulation after a ride.

@faustin289 4 года назад

Turn the key off and on again...there you go, you have your lights!

@carlos8charlie8 4 года назад

@@faustin289 if that were my bike in his situation, the lights stay off until you turn the bike over again. Maybe his is the same?

@carlos8charlie8 4 года назад

@@nunyabusiness896 maybe his is air cooled 🤔

@MaxHohenstaufen 5 лет назад

I use the killswitch 100% of the times. I was taught this is the right way. But I was curious why and here I am learning that, to some people, I've been doing it wrong all along. And finally learning that it's irrelevant if I use it or not, so I guess I will continue to do it as I always did.

@upsidedowndog1256 7 лет назад

I am glad that is over with. A switch is a switch is a switch in a single circuit. Thankyou for making this public statement so I never have to argue this again.

@ddon1797 6 лет назад

upside downdog see the thing I was told about using it from my instructors was this, wear on the bottom it's self so there is some chance if you came to needing it, it may not work. Personally I use the key but I've used the switch too haha

@jamesoren7238 6 лет назад

DDON I would argue with that instructor (respectfully - they do a vital job) that a key and ignition barrel replacement are like 1 billion times the cost of a kill switch replacement, so if you're that worried about things wearing out, use the kill switch and then very daintily turn and remove your key when the bike isn't vibrating lol. Seriously you're not gonna wear it out, unless you have some kind of nervous behaviour that has you flipping it on and off at every light you stop at. In reality avoiding using it at all for fear of preserving it could be far worse. By never moving the switch, you could be allowing crap like corrosion or dirt and greese to build up on the contacts and you won't know it doesn't work reliably anymore until you need it. Not saying use one or the other, just saying it really doesn't matter, OP's right it's just a switch, and you shouldn't avoid using one or the other.

@ddon1797 6 лет назад

James Oren I get that argument haha and personally I'll use it if I'm not getting off the bike ... I.e. trying to talk to someone. But if I'm getting off it why not just remove the key it's gonna come out anyways.

@jakobwest4811 6 лет назад

I personally like the ritual of: leg over, turn the key, flip the switch, wait for the pump, then start the bike.

@christopherstapleton2550 5 лет назад

And people are still arguing after it's been debunked

@Rocketninja200 5 лет назад

Kill switches are useful for parking on hills. Pull in the clutch with the bike in gear, come to a complete stop, kill the engine, and then let out the clutch to keep you from rolling downhill. Its way easier than thumbing around for the key and you don't have to take either hand off your handlebar.

@mushutak 6 лет назад

The killswitch is in the same position on all bikes so if you come across a downed rider you can always quickly switch off the bike without having to look for the ignition. As a mechanic I'm fully aware that using it will have no negative effects on your engine or computer. Any switch has moving parts so using them wears the switch out. I always use the ignition or the stand switch because I have to use them anyway but if I have to turn off the bike quickly (usually to talk to someone) I use the killswitch because its easier. I try to avoid using it often because the mechanism is usually less robust then the ignition or side stand switches and prone to wearing quickly, although I have only ever seen kill switches worn to the point of failure on 30+ year old bikes.

@baqcasanke 6 лет назад

Mushu Tak i have an almost 40 yro bike the kill switch works great i use it all the time. Although i did leave my key in the ignition and drained my battery once.

@MaxHohenstaufen 5 лет назад

I use the killswitch every single time I turn off my bike. I've had this bike for almost two years and the only wear out I've noticed is the painted ignition symbol on the start button. The killswitch looks, feels and works as good as new.

@TheCharillz23 5 лет назад

4year old bike, switch failed... had to tow the bike back. but its a dualsport and sand is super aggressive

@benjaminbreu 4 года назад

Mushu Tak This right here is the exact same thing my mechanic told me when I bought my first bike.

@aaronbright5028 4 года назад

I am also a bike mechanic and always recommend using the key switch unless its an emergency to try and teach people they need to remember to turn the key off. Ive seen hundreds of bikes with the battery drained and no longer able to hold a charge because my service writer took a riding class where they told him that its safe to use the kill not the key.

@JefLeFloch 3 года назад

Added tidbit : Harley Davidson has gotten rid of the ignition key and uses a key fob. The killswitch IS the way to turn off the engine.

@jonr4651 3 года назад

Unless you’re on a sportster.

@muskietime 3 года назад

Actually, most newer Harley’s still have an Ignition Switch that rotates from OFF to IGNITION to ACCY. Can also rotate the Ignition Switch counter clockwise more to FORK LOCK. I personally turn off the engine via the Ignition Switch or the lights remain on. Be well.

@rugershooter5268 3 года назад

@Jef Le Floch Soooo you don't ride a Harley As mentioned Sportster you must have key and Fob......missing either the bike won't start The big bores have a switch that can be locked with the key, however carrying the key is not required if you don't lock the bike, but you must have the switch on ignition before the bike will start, the kill switch must be on run, and the Fob must be present

@JefLeFloch 3 года назад

@@rugershooter5268 2021 FXST. Just Fob in my pocket. Key for steering lock. I'll send you a picture of me riding my Harley, it's very niiiiice 😜

@rugershooter5268 3 года назад

@@JefLeFloch How right you are, my apologies, I've never been on a big bore with a sportster tank, not that I don't want to, but I've got my Dyna and Ultra.

@robertkinkley5289 7 лет назад

The only proper way to use a kill-switch is to use someone else's kill switch

@samwisethebrave3858 5 лет назад

Nah the good ol' twist, pull, drop pranks my fave. Take your buddies keys and drop them on the ground at a red just before they turn green lol

@rutrho890 5 лет назад

Get your buddy killed in traffic for the lulz

@samwisethebrave3858 5 лет назад

@Nightraid yourface yep 😁

@samwisethebrave3858 5 лет назад

@Donald Trump's Space Force dude, I could never take away a name as cool as yours 😮

@samwisethebrave3858 5 лет назад

@@rutrho890 huh?

@anthonyarmstrong9508 7 лет назад

And also to remember to take your key with you when locked and parked the motorcycle. 😄

@nunom1973 4 года назад

It happened to me once, at the beach, and I thought I lost the key, it stood there all day...

@prfm_setya95 3 года назад

Rarely happens to me TT

@robertwalsh5461 3 года назад

Yes, too many times I killed my scooter (RF 600 RR later 1st gen R1)... in daytime and walked into the resort/Heath club... worked out for 2 hours and came back to find my key in the ignition & flat battery. I would curse Suzuki and Yamaha for not putting a kick start lever when it was my fault. Then find a hill... push the bike up it the turn around pushing downhill and pop-start it....totally exhausted from my workout. Sometimes had to do in on level ground... not easygoing.

@eamonnmckeown6770 3 года назад

By the time I finally bought a 'keybak' for my waist band I'd trained myself. Gloves, 'phone, key! Before that. 9/10 forgot the key.

@1212goose 3 года назад

Wtf are you trying to say?

@sparkynzl 5 лет назад

Thanks for the clarification. I've always used all three switches, so if there's a problem I find out at a more convenient time rather than a lesser.

@unni6420 2 года назад

I just loves to hear from you.. you're absolutely explaining the exact point. Nothing to skip on your videos. Thanks for explaining tech.

@illusivec 5 лет назад

When i was doing my CBT training, the instructor reprimanded me for using the KS. Apparently "it hurts the engine". I knew it was bullshit but why waste breath.

@MSCSphoto 4 года назад

This is not what I was told. The kill switch was not designed for as much use and can wear down faster than the ignition switch. The ignition switch is designed to last longer. And designed for use every time you ride/ start the bike. The side stand should last also. It it was a side stand switch I had fail. Over bumps bike would sometimes sputter and sometimes full stall.

@kayhoww 4 года назад

Mike Tarsitano wear down the killswitch.... did you even watch the video??

@dberne 3 года назад

My motorcycle safety course drummed the opposite mantra. “Thumb-Key” was the order to turn off our bikes.

@recklessrickey9513 3 года назад

Did someone say CBT???

@ThomasHodson 3 года назад

@@recklessrickey9513 in the UK, CBT = compulsory basic training, which allows you to ride up to a 125cc with L plates. everyone has to do it before they can go on and get their full bike licence

@AnujFalcon 5 лет назад

The engine flooding happened to me yesterday night ! Man you covered almost all the corner cases. Great!

@stevebot 2 года назад

It's always a good idea to test safety equipment regularly to ensure it operates correctly, kill, neutral safety and stand safety switches are no exception. I often shut down by setting the stand while in gear.

@mattthomson1689 2 года назад

Today’s version of tying the reins with a “get away knot”. Safety devices are best left for safety / emergency response, with occasional, deliberate exercising.

@jaiepps2717 Год назад

I do too

@MindOfManZaar 4 года назад

Using the killswitch often is good practice IMO because you'll be familiar with its location should you actually need to use it in an emergency (throttle stuck, etc.)

@markklinkert3477 4 года назад

I had my brakes fail on track and I left the track at about 100 to 140 kph... luckily that corner had a big run off... I down changed until I was in first which is still a fast gear and the tyre wall was coming. Killswitch and it finally came to a stop.

@dang5118 7 лет назад

One of the best channels for motorcyclists on RU-vid. Please keep up the good work.

@porticoman 6 лет назад

Since it’s there for emergency use there’s a good argument for using it routinely. When faced with emergency situations we carry out actions that we are very familiar with because we don’t have time to think. If we never use the kill switch (as I don’t) we’ll ‘forget’ it’s there and in a high stress situation we’ll just go for what we know. Good video. Thanks

@autumn1546 4 года назад

I use the killswitch all the time, I can keep my headlights on without having to fumble around with the key, and as someone who's had my bike stolen, I always (ALWAYS) use my steering lock, so it's not like I'm leaving my bike powered!

@carlosaircraftmechxnic2819 4 года назад

Why would someone dislike this video? It’s not that hard to comprehend. It’s like a three way switch in your house, in a cense.

@samtoshner8002 7 лет назад

I use the kill switch all the time on my bike. Love having the lights on in my photos haha! Also if I just want to stop the engine for a sec for a quick convo it's nice to not have to turn the key back and forth.

@WorldMinuteOne 5 лет назад

Kill switch breaks the electrical circuit so the engine wont fire ...either way it's the same as ignition switch . Basic circuitry.

@Ducati_Dude 5 лет назад

Exactly... 😀👍

@TerrorBunney 4 года назад

Except the kill switch leaves all your lights on so traffic can still see you bike while the key turns everything off

@theenzoferrari458 2 года назад

*PLEASE EXPLAIN I DONT UNDERSTAND!*

@Showmetheevidence- 6 лет назад

You guys cover some really interesting topics... without the BS - I dig it.

@Porkycheun 7 лет назад

I have finished my MC Garage Marathon and I learned a lot thank to you and your team, so... thank you Ari! ;)

@zbb2stillalive 7 лет назад

Can you dissect clutchless gear shifting please. Is it bad for the engine?

@sv650nyc7 7 лет назад

It's not bad for the engine but potentially your shift forks. If the throttle is closed completely at the moment of up-shifting, it's as smooth if not smoother than using your clutch. However, when you accelerate hard with wide-open throttle or are already at high speeds, closing the throttle completely when up-shifting takes longer and is harder, so I generally use the clutch at speeds above 40mph. Clutchless down-shifting is even harder since you have to precisely match the engine revs, and it's not saving any time.

@zecc81 7 лет назад

SV650NYC I will add that I tend to get stuck in between gears if clutchless shifting 5-6, so I always use the clutch for that. Seems to be a somewhat common thing for all kinds of bikes out there.

@zecc81 7 лет назад

zbb2stillalive For the OP, there is a video out there that explains motorcycle transmissions, has one dissected, and goes into why the "dog" tooth gear set up can handle clutchless shifting. Should be an easy search.

@ankitluthra1563 7 лет назад

zbb2stillalive buy a moped instead you bitch

@kolby4078 7 лет назад

I only use the clutch when I'm not accelerating, my bike responds best that way. if im already doing the speed limit I clutch up, when accelerating I drop the throttle as far as feels smooth for the perfect upshift

@alanhassall 4 года назад

I caused myself some trouble and frustration a long time ago when I used the kill switch to shut off the motorcycle. It was a little bit corroded and didn't make a good connection when it was reengaged. I usually use the kick stand since my bikes have a kick stand safety switch.

@DustinHodgkin 6 лет назад

Quick story: A few years back I showed up to help a buddy load his UHAUL on my Triumph Bonneville. To mix things up I used the kill switch when I parked (I typically turn the key to turn off the bike…per the salesman and owners manual instructions). When I returned to my bike and it wouldn’t start, I began to panic. We ended up attempting to load my bike into my buddy’s half full UHUAL to get myself home. After almost dropping my bike while trying to roll it up the ramp, I finally remembered I’d used the kill switch. Appreciate the video!

@mohanramaswamy3598 3 года назад

Thank you!!! I was wondering this as well as I accidentally keep putting kick stand down first and that kills the engine. Using ignition key and the explanation of the battery consumption makes sense!!

@marke1464 5 лет назад

My carburetted bikes won't even turn over when the killswitch is flipped. Once did it on accident while going down the street at night. Gave it full throttle, more choke and when i realized i flipped it on accident and switched it back on...loudest band i've ever heard. The whole exhaust was full of mixture. Scared myself shitless xD

@squareone2520 7 лет назад

I think it would have been worth mentioning a couple positives of using the kill switch to shut down the bike every time: 1. Ensuring that the kill switch works (better to find out before you need it in an emergency) 2. Develops muscle memory so you can instinctively hit the kill switch if you need to (i.e. stuck throttle in heavy traffic)

@humzilla707 7 лет назад

Square One Lol what emergency? You have a key, a kick stand, and last but not least breaks and a clutch, aside from the stupid kill switch

@robertp457 7 лет назад

An accident or if the motorcycle is dropped.

@YTisDumb 7 лет назад

Square One good points. I think of the kill switch as a cheap theft deterrent device. If you're too stupid to figure it out you can't start it, or you will flood it.

@squareone2520 7 лет назад

humzilla707 You can't use the clutch, and the brakes, and turn the key off at the same time. You can, however, hit the kill switch and maintain complete control of the bike. That's why the kill switch is where it is. And it's a fair bit slower to kick the stand down than it is to hit the kill switch. Also, you can't really put the side stand down if the bike is leaned over in a turn.

@madlipak6108 7 лет назад

i fell of my bike once and my chin hit my key till it's bent. and i fall on the left side of my bike so the kick stand is not an option..it's still in gear and the real wheel is spinning..despite the commotion i immediately flick the kill switch without even looking for it...my habit of using the kill switch paid off

@hellishgrin4604 6 лет назад

I love that makeshift side cover on the shadow, I was just going to paint the filter cover on mine, but now I want to do something like that!

@ecoboostluke1755 6 лет назад

When you posted comments from people I paused to read them. I want to make it clear that your videos do not address what everyone “already” knows. I am learning quite a bit by watching your videos. I love cars/trucks and I know quite a bit but I’ve never worked on a bike and there is a lot to learn. Please continue your videos on every topic and not just topics an experienced rider will be interested in. Thank you.

@alwayspointnorth 5 лет назад

I ride a dual sport bike and when I went down I immediately hit the kill switch to keep it from running when it was on its side. So I like it

@davidspin581 7 лет назад

When I use the kill switch it throws EMP's and my watch runs faster...

@yamkaw346 4 года назад

Is this true? How does the kill switch do that but not the ignition switch? Don’t want to magnetize my watch

@lifeischeesy 2 года назад

69th like ;)

@Manas__Gharat 6 лет назад

That’s a relief! Because me and my ride buddy had this wonderful debate going on since last few years! You settled that finally!

@phoenixclose6765 3 года назад

Simply easy explanation cheers mate

@animeshgupta8171 7 лет назад

can you make a video on what happens when we dont use the clutch for shifting gears

@ktimo100 5 лет назад

Conclusion, just pop out the stand to turn off ur bike

@GunGuy258 4 года назад

Yup

@BerryTheBnnuy 4 года назад

And if your bike doesn't cut off if you put the kickstand down? I have a 1988 KZ1000-P and the kickstand only kills the engine if you both put it into gear and release the clutch just enough to get it into the friction zone. I previously had a KZ750-LTD and it didn't have any sort of kill switch on its kickstand.

@Edwardlewis18 4 года назад

@@BerryTheBnnuy It's probably due to them being older bikes. Both my 2000 GS500 and 2017 z650 instantly get shut off if the bike is in gear and the kick stand gets put down.

@joemann7971 4 года назад

My bike doesn't turn off if the bike is on neutral. It will only turn off if I leave it in gear

@MoodSwingZX 4 года назад

so U're in the first gear after U stop xD...

@canada_rye 3 года назад

I never knew this was an issue for people. Ya learn something new every day!

@shookadance 4 года назад

PA for our courses all the instructors are to make sure students use the kill switch to turn off their motorcycles, then turn off the key. Many students have been reprimanded for using the key to turn off the bike. The way it was explained to me, since I brought up at our instructors meeting that neither way is right or wrong, is that they want to make sure brand new riders know 1. Where the kill switch is, 2. Get used to it/muscle memory in case of an incident, and 3. So that new riders keep both hands on the handlebars at all times, until the motorcycle is off. Especially for drills, as we line them up. There have been instances where people have had the bike in gear, in line, and for some reason used their left hand to turn the key to turn off the bike lol. You’ll see a lot of insanity at the beginner rider course.

@TourmotoDesign 7 лет назад

I can't believe that this is a topic of debate.

@Tacos888 5 лет назад

Content lol

@bluebottle1988 7 лет назад

haha - totally agree with Triumph. I was using my kickstand for the longest time to stop my bike. Worked no problems when going to work, but the first time I did it going to somewhere else I forgot my key in the ignition. For two hours.... battery dead.... Now I ensure the bike is in neutral, kick the stand and turn the bike off at the key like a good boy. 'Cause I am an idiot like Triumph engineers thought.

@DeanOliver1964 5 лет назад

I've been known to do the same thing as well. I finally broke myself from using the kill switch.

@KennyRider137 5 лет назад

I have other keys on my keychain so I'm sure to take my keys with me, but I can see how easy it would be to do what you did.

@Compufreak 5 лет назад

For me it's the other way around... I used the key for turning my bike off and after getting ready to go (removing luggage, putting my brake lock in place, taking off the helmet) I forgot my key way too often. Now I use my side stand and keep the lights on and hear a bit of coil whine reminding me to take the key with me. Did not forget it a single time since I do this. I also leave the gear in as I usually park on a non-flat spot so the bike can't roll.

@kVkV-sw5se 5 лет назад

Thank god someone has tackled this obviously highly concerning issue for many people. I just don't understand why it is an issue. How on earth can a switch do any damage. All it does is break contact in a circuit. I've always been perplexed about why so many people think that using the kill switch regularly does any kind of damage. We train people to always switch off with the kill switch first, simply so that this becomes automatic and in an emergency they automatically use it instead of trying to find the ignition key, requiring them to remove their hand from the handlebar. But even if you don't agree with this, what does it matter? It's just a switch!!

@diversionbob8482 5 лет назад

330kV 330kV , your reason is the only good reason for using kill switch then key routine, it makes it automatic in a real emergency . The explanation in this video that the key, the kill switch and the side stand down cut out switch all do the same thing is then demonstrated in the video to be WRONG. For that reason I have Thumbed Down this video.

@just_jimmy 6 лет назад

Precise information. Thanks

@Im_George 5 лет назад

I had a friend deployed in South Korea for a bit. He's on the "don't touch kill switch side" because he'se seen a lot bikes with the kill see no longer working, because they always use it.

@boomerguy9935 5 лет назад

That seems like an easy fix. If you use it regularly, then you will find out that it is broken right away.

@AndrewBoundy 7 лет назад

Was wondering about this - now I am not and can wonder about something else.

@patches350 7 лет назад

What'ch wondering about now ?????? I was just wondering.

@AndrewBoundy 7 лет назад

The Wonder years?

@patches350 7 лет назад

Wonderful :-}

@Patrick_B687-3 6 лет назад

OMG, this has been in question? Makes as much sense as a left or right handed belt for your trousers.

@st518 5 лет назад

You're so smart bro. I was thinking about straight piping my 636 but saw your video. Ill just wait to buy a slip on

@PsyMongazoid 7 лет назад

Didn't mention the main use of the kill switch; the quick flip to get the all-important backfire!

@SvenTviking 6 лет назад

PsyMongazoid Which bounces your exhaust valves into the pistons.

@etunimi4206 6 лет назад

@SvenTviking *shh*

@sniuchi2549 6 лет назад

Do you mean that it has uses beside that?

@devillovexxx 5 лет назад

i wonder how if i kill switch the engine if and we not pull the clutch does the tyre will slide?

@junglejim8781 5 лет назад

Kill switch pops on a carbed bike with open pipes is so much fun 😂

@821lancevance 7 лет назад

In bike safety class they where crazy anal about using the kill switch. They made it sound like if you didn't your engine would explode

@kolby4078 7 лет назад

at my msf course the pressed the issue because they wanted both hands on the bars not because they key is bad

@immikeurnot 7 лет назад

What kolby said. I've seen people drop their bikes by reaching for the key left-handed and forgetting their bike is still in gear. If they'd used the kill switch, they wouldn't have looked like dumbasses.

@JeffWerner 7 лет назад

My MSF course here in Vancouver emphasized the kill switch use for parking: by leaving the lights and blinkers on (but engine off) you're more visible to traffic as you pull in, especially if backing slowly in from a traffic lane.

@aidangale5521 7 лет назад

I was also just recently told at the MSF course that this was the reason. To be more visible when stopping at the side of the road and parking.

@road_king_dude 7 лет назад

DC bro?!?!? Your argument is invalid!

@Ducati_Dude 5 лет назад

A benefit of using the Kill Switch frequently, is that you Know it's working... 🙂👍 I was a printer for 19 years using high-speed Flexo printing presses. The boss would always say... 'Hit that E-Stop once in a while to make sure it's working'.

@TornadoCAN99 3 года назад

I've used kill switch on my 2013 Triumph Bonneville for the past 7 years, each and every ride, over 70k KM's. Never had any issues. Only problems I've seen, on our Triumph forum, we regularly get posts from newer riders in a panic b/c they cannot start their bikes. I've learned one of the first things to ask, "Did you accidentally toggle the kill switch?" . This has earned me many "Likes" on the forums....

@namdarbolour9890 2 года назад

In addition, as taught in my MSF motorcycle safety course (2019, California), it's good to get in the habit of using the kill switch to turn off the bike instead of the key, because that's the quickest way to do it in an emergency, such as when you need to stop power to the wheels, or if you go down and want to reduce risk of fire. Kill switch requires a movement of a finger to push a button (easy, fast), whereas key requires movement of arm and two fingers squeezing to rotate off (harder, slower).

@judenoda9412 7 лет назад

Can you do a video of pros and cons of different engine configuration V, Inline, Boxer, like what you guys did with the Drivetrain. Im really curious

@judenoda9412 7 лет назад

Kenjihiro Sakamoto but how is Ducati getting High Horsepower if its a V twin?

@ZacharyB 7 лет назад

Large bore, short stroke. This makes the engine capable of making a lot of power high up in the rev range. Motorcycles like Harley-Davidson are the opposite: smaller bore, longer stroke. The longer stroke creates higher piston speeds, which is good for low-rev torque, but the engine can't rev high, because the pistons would be moving too fast.

@judenoda9412 7 лет назад

ZacharyB what about dirtbikes? The vibrate at high RPM but theyre not that fast

@ZacharyB 7 лет назад

The vibration in dirt bikes/dual-sports/motocross bikes isn't necessarily from long-stroke pistons, but from there usually only being a single piston. This keeps this kind of bike simpler and lighter weight, for off-road use. But because there's only one piston, the reciprocating weight isn't balanced by another piston somewhere. Sometimes, the manufacturers add in a balance shaft or something to help smooth it out, but it's not as smooth as when there are more pistons balancing each other out.

@sdqsdq6274 6 лет назад

problem with ducati bikes they dont last long

@allmhuran 7 лет назад

Great channel, found it from your MT-10 review (one of which I bought two days ago!) I'm still bingeing on your content and I may have missed it if you've already done it, but if there are any tips on clutch, throttle and brake maintenance (as opposed to adjustment) would be nice. How to lube them, what to consider if you have an electronic throttle, basically how to keep the controls feeling smooth and reliable.

@gavinmileriderodey2641 5 лет назад

As always great vids and excellently explained. Please explain the courses of handle bar vibrations at high speed 60mph+ and rear foot peg vibrations.

@garrettdunlap9044 6 лет назад

I have a 1978 Honda Goldwing GL1000 (carburetor bike) and I made that mistake with the kill switch off and tried to start and start (5 seconds, get over it) and I realized it, then went to start with kill on and the bang was so loud... There were two young women immediately (5 feet) behind me and I saw in their eyes their own lives flash before them. It was the day after the Los Vegas mass shooting...

@eduy1985 6 лет назад

Garrett Dunlap My Suzuki gs500 2k6 if I let the kill switch on, the starting motor don't move the engine. So it can't let in any gas to the engine as is no vacuum from the motor. Anyway, I tried to let it down in 2nd gear across the street 4 times without luck, the rear tire don't move. Then I realized about the kill switch.

@fornicateu2 5 лет назад

I'd have screamed 'get down'.

@elkcub25 4 года назад

Las Vegas, not Los Vegas. Hundreds of people do this. Funny how nobody ever says Las Angeles. And I'm British, by the way.

@advrx1041 7 лет назад

Ha! I have been using my side stand for years since I always park in gear. LOL I never thought of this as an issue.

@rob_9876 7 лет назад

ADVRX I always use the side stand to shut my bike off too. Keeps me from forgetting to put the stand down before dismounting.

@MoSportsUSA 6 лет назад

Same here. You're probably already in first gear, which is also a biker's parking brake. These vids are sometimes duh info for noobs.

@craighoward4531 5 лет назад

Side stand is the way to go. Bike stays in gear and doesn’t get dropped.

@sundaramsharma6210 6 лет назад

This channel deserve 1m subscribers. Awesome video

@SGbeerlover 3 года назад

Thanks!! There had been so many misleading info online!

@ThePirate24263 7 лет назад

kill switch is fine, hell some newer bikes don't even have a traditional key just a proximity key fob and as such only have the kill switch no ignition what so ever.

@vstm3950 7 лет назад

Using kill switch affects the clutch and gearbox. Suspention loose its properties too and tyres wear faster

@RT22-pb2pp 6 лет назад

bahahahahahahahaa and ruins gas mileage

@DiegoMav3rik 6 лет назад

Dude wtf? And the Earth is flat, right?

@RT22-pb2pp 6 лет назад

Yes and breathing causes death.

@vstm3950 6 лет назад

yes

@DonCaraotica1693 6 лет назад

Now... I can die in peace

@deepanshuraja5589 6 лет назад

wow really good educating information...... Subscribed right away

@A11ium 6 лет назад

Even an instructor I talked to said it would damage the electrical components of the bike. I always use it though. So much easier to reach.

@graemesydney38 7 лет назад

It is not a Kill Switch it is an Emergency Kill Switch. Every time you use the kill switch you are practicing for an emergency (jammed throttle). True, a rare and improbable emergency but given probability and severity its worth the effort.

@curator23 6 лет назад

My first bike was a Chinese twist'n'go. The throttle spring snapped after 2 weeks, while at was at max speed and needed to slow down for a truck that had just pulled in front of me. I had been instructed to use only the key to turn off, so I was unprepared for the emergency. I had to wrestle the bike to a stop with its barely adequate brakes before reaching for the key. Only then did I realise I could've used the kill switch with my thumb. I used the kill switch ever after. Now I have a CB125F which has no kill switch.

@jothain 5 лет назад

@@Chris-yy7qc I don't use kill switch to stop by bike, but for safety standpoint I don't think it's bad thing to use it. My gf uses it to stop her bike and I once asked about it and she said it was recommended at getting drivers license. I know it is wearing the switch, but I don't care. It's good to know that she's accustomed to it as a kill switch if something were to happen. After all. That switch doesn't cost virtually nothing if it breaks because of using it.

@GerOffYeWeeBastard 5 лет назад

Neither! Use the sidestand. Stop, clutch in, leave the bike in gear. Put the sidestand down, bike shuts off. Clutch out, set bike on sidestand. Now you're parked. Leaving is the reverse. Leave the bike in gear, Stand the bike up, put the sidestand up. Clutch in, start the bike. Now you're ready to roll.

@samgrady5614 5 лет назад

Very clever I really never thought of this but I do like to warm my bike a few minutes before riding off.

@GerOffYeWeeBastard 5 лет назад

@@samgrady5614 This is assuming that you've already been riding and it's warmed up. Of course if you need to warm it up you will want to put it in neutral (instead of sitting there with the clutch in). Morning warm up is pretty much the only time I use neutral.

@stevepercival4774 5 лет назад

You're not a harley man obviously

@topstags7338 6 лет назад

My bike doesn’t have a key. Kill switch on, starter, bike goes. When I’ve finished, kill switch off. Job done, no damage. Great video.

@hernendezsanchez7646 4 года назад

My man. Great video. I was getting alot of bro science and mechanics on this, I'm glad I went to a good source. Keep up the good vids 🤜

@grahamsmith2022 7 лет назад

Who remembers the good old days?,leaping up and down on the kickstarter and cursing 'cause it hasn't started,starting to worry about what's wrong with it,building up a sweat, then noticing you'd accidentally knocked the kill switch to "off".😀😁😉

@munkeemunks 5 лет назад

And when the kick starter kicks you back. 😂

@finnishturtle3059 5 лет назад

I still use kick starts and almost everyone i know also use kickstarts because in finland u drive 50 cc bikes

@MrRyanthegreat1 7 лет назад

Fun one for you, the RC390 will crank but not start if in gear with the clutch pulled but the kick stand down.

@consolehacker54 7 лет назад

Oh man that has probably caused a lot of people some confusion, even my 1982 Yamaha doesn't crank with the stand down. The other day it took about 15 minutes to figure out why my brother's 82 Yamaha refused to crank after charging the battery, and it turns out he parked it in gear and the neutral light burned out LOL made me feel pretty stupid

@kolby4078 7 лет назад

odd, my cbr won't even crank in gear with ks down. have to bring the stand up or put her in n

@MrRyanthegreat1 7 лет назад

Yeah I know! No other bike I have encountered behaves this way.

@iiroperkele3330 7 лет назад

every bike ive driven in finland behaves like that :O Though that is only small bikes because i legally cant drive bigger than 125cc as im 17

@wmoscati 7 лет назад

MrRyanthegreat1 my sv1000 does the same thing. But the moment you flip up the kickstand itll turn right over

@1400IntruderVS 7 лет назад

I realize I am a technician but I was surprised to find there are people that are actually concerned about this topic.

@jseden 3 года назад

I've got a pretty bad battery at the moment so I always use the key. The headlight will drain it pretty quick... The other week, I started my bike, went back inside to get ready and found it wasn't running when I came back out (forgot to turn the fuel in). Those 3-5 mins were enough to have the starter really struggling to get it going again. Good thing my bike starts super easily! I'll get around to replacing it some day.

@timyassa4343 4 года назад

I was taught kill switch, and I've been doing it that way for the past 5 yrs

@davidelias5904 5 лет назад

I use the kill switch all the time. My bike is 11 years old and it never left me on foot.

@JubaProductionsStudios 3 года назад

Aeeee vai Brasiiiiil

@kiba1208 6 лет назад

thank you for this video very helpful. can you guys make also a video on how to use the choke properly and what the purpose for that.

@hawkrider88 6 лет назад

Great info.....thanks!

@whiteknuckleracer1182 7 лет назад

Now people just need to believe what you say instead of what others have told them and move on with life

@roadsterman 5 лет назад

The kill switch is for emergency personnel to shut off your bike. They don't have time to look for the key location.

@jothain 5 лет назад

Lol 😂

@Noodlehustle Год назад

nice, i was wondering quite a bit about this. to use or not to use the killswitch regulary.. Now i know, thanks !

@olivialambert4124 3 года назад

I typically use the kill switch to prevent people messing with my bike when I think its likely. Most people seeing my bike for the first time want to play about so it just saves me a lot of hassle knowing they aren't aware that the engine can't start. That said I have forgotten about it and worried myself a few times, but when I finally got round to it the bike started easily and I've finally learnt to check the kill switch if it no longer starts. I've never had to use it, in fact the only time I dropped my bike I found out it has its own automated kill switch and stopped working until I turned the ignition off and on again. Confusing at the time but pretty cool now I know.

@calvindavis9005 5 лет назад

I was taught to use the Kill switch, so that in an EMERGENCY you'll know exactly where to find it. funny thing is though, in an emergency my arms were never long enough to reach the kill switch

@recklessrickey9513 3 года назад

Serious question: If your arms aren’t long enough to hit the switch, how do you reach the handlebars?

@calvindavis9005 3 года назад

@@recklessrickey9513 in an emergency. (sliding on your arse 3 meters behind the bike) handle bars are also hard to reach

@pimhendriks4964 2 года назад

@@calvindavis9005 if you are not near your bike it is not necessary to turn it off quickly right? It’s not putting any limbs in danger of getting shredded by a running chain or something

@pauloconnor7951 5 лет назад

People living in fear should turn off MSM (merchants of fear)

@markkulyas2418 5 лет назад

Thank you for the clarification I just bought a new Triumph and was wondering the same thing.

@9615015142 5 лет назад

thanks man... m from India n thankful to u u r clarifying the myth about bikes.... such as cleaning chain with kerosene doesn't harms ur chain n now the kill switch one... thank u for making such videos keep going n growing too

@RaynosFAA777 7 лет назад

Wait so Triumph says not to use the kill switch because you may forget to turn off the key and drain the battery? How is that even possible, you have to turn off the key to take it out.

@ExoticOnTheBeat 7 лет назад

AbyssWalker yeah, they didn't think that through. Maybe they put that there for wiggle room in case someone tries to say their bike got messed up due to the killswitch which just sounds stupid to me.

@northernninja3321 7 лет назад

where i live (in the middle of nowhere admittedly) we rarely take keys out of vehicles. i've seen (and had it happen) where people kill the batteries on snowmobiles and stuff from doing exactly that.

@u9Nails 7 лет назад

If I see a key in a Triumph, I'm going on a demo ride! Who wouldn't right? It's a joke people. This wouldn't happen.

@WarDogTheAwesome 7 лет назад

It's them relieving themselves of any responsibillity if something happens.... Nothing more, all companies do that, just avoiding lawsuits

@fernando-sl7qm 7 лет назад

Aidan Vorbeck when you walk back and notice the headlight is on 🤣😱😱 hopefully the battery not dead

@MM-hr9bv 7 лет назад

The US is such a huge motorcycle market? Hahahahahahhahaha

@shadw008 7 лет назад

Mc Garage, answering questions i have always had but was too lazy to search the answers for

@twes619 5 лет назад

I used the I'll switch for 7 years on my Yamaha fz6r. I always turned off the ignition and removed my key. It started up every day, I never had any issues.

@_baller 6 лет назад

I was taught to killswitch

@adrianaldueza 5 лет назад

2:01 You don't believe me? Take a look at this wiring diagram. Me: It looks complicated. I will not use the kill switch.

@jmilitano777 5 лет назад

Adrian Aldueza just look at your bikes diagram, follow the lines. Not hard at all.

@Ridingrules10000 4 года назад

Hahahaha. Nice.

@oscarleon3008 6 лет назад

Great video, like always! Could you make a video on throttle body synchronization?

@wiesshund-games 3 месяца назад

One thing left out here which is why we always relegated the switch to emergency use. The switch sits on the bars. It is not the most sealed thing in the world, it gets wet can get dirty or corroded inside. No one really thinks about them at all. So, you go flip it off, especially if it has not been in use for a long time, and then later go to flip it back on, and it wont make contact, and then there you sit with a bike that wont start and no way to take the switch apart and try cleaning it. Bike is not harmed at all, but the switch has had other plans. The ignition switch is better sealed and protected usually. The battery is good to mention! I see a lot of people kill the bike by the stand or switch, hop off and walk away. And there the bike sits, with the lights running till the battery finally dies, provided no one steals it in the meantime. Easy to forget because the engine is already off. And if you have to push start it because you have no way to recharge the battery, that is really hard on the stator.

@KTM_Trooper 7 лет назад

I have my 2017 duke 390 for about 2 mths and have never used the kill switch!! Its like i never realized its there lol

@KTM_Trooper 7 лет назад

Kenjihiro Sakamoto Who would even be a fool not to read the owners manual? Are you one of those?!

@KTM_Trooper 7 лет назад

Aayush Koirala Yea the bikes cool and all... but for its class it has relatively less pound feet of torque... not to mention less agile but overall i can give the bike a thumbs up! and i especially like the rest position on the seats... its really comfortable!

@Compufreak 5 лет назад

Pro-Tip: Make sure where to turn on the high beam before you get into the dark for the first time... Damn hard to find at night - I might know from experience 😅

@ryanduncan2381 7 лет назад

Using the kill switch will wear down the switch itself. Though this will take an extremely long time. I use my kill switch because it's part of the start switch on my 2017 fz07

@ryanl5249 7 лет назад

Ryan Duncan most of the time I use the kickstand to kill the fz

@Atlessa 7 лет назад

"an extremely long time" indeed, being on the order of hundreds of years of daily use. And even IF it wears down, what do you think will happen? -> it won't connect what it's supposed to connect, meaning the engine will turn off/won't start in the first place, same as if you had forgotten to switch it back to 'run', which as the video shows is only a problem in (some!) carburetor models. My own bikes (a GSF600 and a GSX1100) won't even turn over the starter when the killswitch is in 'off', and I assume the same is true for MOST bikes from that era.

@mechanicalcanvas 7 лет назад

One could make that argument of the key switch as well, eventually after a trillion rotations, its going to wear down as well

@seniornuggtes 6 лет назад

Lol yeah idiot, just like being alive will eventually wear you out... after a very long time... its a switch. A function of the bike. Nothing will break.

@Mikey196969Boomboxer 6 лет назад

Listen DUMMY .. using any switch including the ignition switch will do the exact same thing! Some people are so damn stupid that they should not be driving any motorized vehicule

@josemorales-rs3ov 4 года назад

One time I was trying to start the bike come to realize that 5hw kill switch was on the off position, but always had this question, kudo's

@reynaldoruizflores 7 лет назад

I like to known more of Euro standard, emissions & the effects in design of motocycles, please make videos of these topics!

@advaitduggi1448 5 лет назад

I live in India with geared bikes so I just let go of clutch while in gear

@rizkybossman6053 5 лет назад

How about a DIY kill switch ?, Will it damage the bike ?

@adammiller9179 3 года назад

Always Kill-Switch first. It shuts the engine off but still allows coolant to flow and the coolant fan to come on for a minute before I take the key out. There is a reason it is so easy to access.