Decap deprime 9mm without a press

Подписаться 347

Просмотров 27 тыс.

50% 1

I deprime off my progressive press and dont have a single stage press yet.I like clean my brass first so i get better priming feed on my lee pro 1000. Of course you can reload without cleaning your brass but with the lee pro 1000 he cleaner your brass the smoother it will run because it doesn't take much soot to make the primer feed stuff up.Anyways hope this makes it easier or is handy for someone.

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@michaelhiggins5219 8 месяцев назад

That is absolutely BRILLIANT. Love it. Thanks sir.

@joelbellJB 3 года назад

80% of the comments completely failed to hear or just ignored the part where you said you like to deprime before you clean the brass. it makes sense if you want to only clean the brass once.

@scottomalley7103 3 года назад

Heap a lot of goose out there. Especially if you don't have a single stage press or a specific hand deprimer

@phrack420 Год назад

Awesome! Thanks, I’m am going to do this tonight after work!

@JohnnaMartywashere 8 лет назад

ive done over 3000 rounds just like this...good system to use when u dont want to use a press or dont own one....thanks for the validation.

@charredskeleton 6 лет назад

Thanks for sharing! I like the socket concept

@jamesdam3170 3 года назад

Suggestion, get a wooden block, drilled a hole for primer to drops down...on the opposite side of the block drilled and open the hole out create more space for collecting primer..good on you mate.

@818valle_cannabis Год назад

Funny I’m an American learning how to reload from a British guy 😂 I love America 🇺🇸

@BigFiveJack 7 лет назад

Hi. If you take a 15 inch piece of 2 inch by 4 inch (or 6) board and drill a 3/8 inch diameter hole at the halfway mark, then put your socket over that hole, you can contain many more dead primers!

@TH3L33TM3XICAN 3 года назад

Good video keep them coming mate.

@raulrivera6356 3 года назад

You have to resize anyway so this is a much lengthier process..

@silverenigma7729 6 лет назад

That's all well and fine but how are you resizing your brass? unless you are in a true survival mode I don't see why anyone would risk safety…. especially when it is very affordable to reload on a budget with minimal equipment.

@neilreid9005 3 года назад

If you're going to reload with any efficiency at all, you'll need a press. I've never cleaned brass with thousands of successful reloads; I get it that some find it important. It's all good. Thanks for the vid though.

@jamesglenn520 3 года назад

You still have the Resize!! The first die for the process Resizes and deprimes.

@dick-parker 3 года назад

Well the video says it’s deprime he said in the video he doesn’t like to use the press for this step

@Tro1086 6 лет назад

Iv done it this way before, when I didnt have any reloading tools. You should check out the Frankford Arsenal Handheld Deprimer, it works really great and keeps the mess off your press.

@scottomalley7103 6 лет назад

Tro1086 yeap got one of those these days