DEEP DIVE... Custom JCS Stihl MS500i with a MS660 piston... AN ACTUAL HYBRID ... (read description)

Подписаться 31 тыс.

Просмотров 20 тыс.

50% 1

I appreciate all you giys that watch and subscribe to my channel... for a dude in a little 3rd stall garage I can not believe how this business has blown up... obviously i am still not taking in any new customers sorry... but that doesnt mean that I take it for granted that you guys watch... I know this channel will be my full time job eventually and then i can do all these wild builds and dedicate to better cameras and equipment so it is more enjoyable and "professional" to watch... but dont think i will ever tame it down... not happening... and with that said....
There are a couple guys out there that i refuse to name that are falsely claiming they do this same hybrid build... one of them has quite a following... Now I had a LOT of expensive learning moments figuring this hybrid build out and I always have to eat humble pie when i fail (just had to do a video yesterday taking a L)... but to just claim you have figured a build like this out WITHOUT ACTUALLY DOING IT... dude really?!?!?! These hybrids are NOT easy to figure out especially when there is zero blueprint for them... I had to deal with the case volume and stuffer... the wrist pin and skirt length on the 660 piston... the saw not idling after it was swapped... and one expensive cylinder I trashed 😬... I would like to know how you solved all these issues... you know... since you also do the 500i/660 build 🤷‍♂️ I'm all ears bud...
To everyone else....
THANKS FOR WATCHING!!!

Опубликовано:

11 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@Turtlenaide 23 дня назад

Amazing job Brody I keep my 500i stock but after seeing this 👀

@backwoodsraised4395 Год назад

John u should start advertising ur saws so people like me can buy them from u!

@brianmcintee6647 Год назад

I love your no bullshit attitude along with the builds

@kipmyers5897 Год назад

I really like the way your saws look....I agree I like those side covers too..I have looked into casting in order to build my own design for covers...I'd like to see what type of tools you work with...I see you don't reply very often...To reply to questions is a good way to grow your channel...I use to watch many of the big saw builders on you tube but they just don't show enough....I like seeing how a saw performs but I tune in to learn more about the build ....I am learning alot about expansion chambers....The few times I've put one on a saw I'd saw it was the single biggest HP gain I've found ....I enjoy your videos I think you do good....I'd say just be different than other saw channels...Reply to comments from time to time and you'll grow bc that would be different ....I hear people say they don't have time to respond but keep in mind ....People take time to comment....if you interact and teach people then you'll form a solid base ....As we know this can lead to you tube being your job...if I wanted to be better than other builders that is where I'd begin....I personally don't comment very often to anyone's videos and no reply is the number one reason

@user-jx5me8kw5m Год назад

G.O.A.T Amazing job you put so much love on your job and the rezults dont lie. I wish i have one guy to port my saws but we have noone in Greece.

@justinweaver8787 Год назад

Excellent job i wish i had 1 of ur saws hope u have a good weekend sir.

@adraonbuck Год назад

I’ve been experimenting with my 500i’s since following your channel and I’m Reeeally looking forward to this series. My biggest issue seems to be the ongoing “4stroking” issue. It only seems to take place when The saw is less loaded. So limbing, scribing, and most small diameter cuts. If there’s any way you could touch on that one I’m sure I won’t be the only one more than grateful. Always appreciate your work John!

@FYMM69 Год назад

John might be able to resolve your issue and this is precisely why buckin Billy Ray doesn’t care for the 500i and why I haven’t bought one so far

@PimSchouten Год назад

@@FYMM69now he does haha! Getting a build, like John, wcs, ripsaw, and a hungry chain, it helps!

@jasonsayre8102 Год назад

Love that thing, such a sick saw!

@dalemeyer8207 7 месяцев назад

Guilty of Treeson video is how I found Your videos..... Love Your teaching ability and skill level. Thanks 😎

@GlynnRussell-ew3pp 5 месяцев назад

Bad ass buddy love you saws

@servanttofriend8481 Год назад

That saw is gnarly, bro!

@b.k.thesawdogs3405 Год назад

Keep going Brother you are Awesome a big long time fan thanks for all the tips and hope the channel goes ballistic!!!!! cheers B.K. & the Saw Dogs

@jasentonguepowersaws4206 Год назад

Looking forward to seeing you grow this channel

@seanthompson2665 Год назад

I absolutely love the content

@jaydee2620 Год назад

Damn that’s a nice saw. I’m going to attempt to dye the covers of my 390xp. We will see how it goes.

@dermagazina813 7 месяцев назад

Verry verry cool Job , to bad for Germany ! 👍💪👌

@chadj8374 8 месяцев назад

Just seeing this epic dude you the man

@smigletat9634 Год назад

Haters are gonna enviously Hate.. Don’t hate him cause you ain’t him.. The end. This guy produces results time after time.. 5stars in my my book & A+ for his efforts..Well done John, well done indeed.

@chrisseger6870 Год назад

Take time for that family, my man. And haters always gonna hate. Don't give them another thought. Not. Worth. Your. Time. Also, another gread vid. ✌️

@evanb2679 Год назад

Keep up the good work man, I'm hoping some day I'll run into you at the middy or something

@StroDshiesty1 10 месяцев назад

if only i could put this engine on a scooter with an expansion chamber i think itd be a hell of a time lol😅

@blueballz91 Год назад

Great video thanks for sharing what bar wrench is that

@kipmyers5897 Год назад

I just watched your video on dying plastic...Awesome video thank you !!!! Great knowledge......Can you tell me which dye I need to match sthils orange and what do I need to match Husky....Thanks!!!

@RICHIE_RICH89 7 месяцев назад

I really want to build a stuffed crank stroker saw +2 or 3 mm stroke. I build rc truck gas engines some are 18 hp that are only 72 cc. I know i can do something far from never done. I learned so much from rc max 70 engines and alx 71's man the power is off the scale. I want to mount a alx 96 in a saw 😅 it will be brutal. Has to be done. Soon ill be on it. The footprint is small on the engines. Gobs and gobs of power. A Reed case would be cool your probably wondering what the hell im talking about lol. Cool channel i cant wait to see your port work.

@johndunbar2393 Год назад

I have a half wrap for a 500i, if you want it John. I like full wraps, or 3/4 wraps myself.

@FYMM69 Год назад

Love your work bud. Be super cool to show us how to make a ratcheting scrench. We can all use one of those babies Where do you source the rubber scrench holder for the handlebar??

@antochibogdan7090 Год назад

Cool man 👍🇷🇴👍

@timberray9572 3 месяца назад

Please come back, this was the best channel on RU-vid.

@SugarRayAO Год назад

$75,312.00 for a 500i are u serious? Did u mean $7,500? If u meant what u said WHY THE F Did you pay that why did you need\want it so bad? Sorry I’m just so confused and blown away at that price! Your fn nutz haha love ya jcs

@Phil-xy5rb Год назад

Would like to see how you fit captive bar nuts on side cover

@Boost_Addict Год назад

love it man keep it comin! Ever gonna do Husqvarna's?

@erichartman5969 Год назад

That saw looks so bad ass! Love the max flow mods you did shit looks great! Hey I couldn't find your email anywhere on here... so we can communicate more.

@jive687 Год назад

Can you share more on the custom scrench?

@kingniles Год назад

What type of loctite would you recommend for the muffler nuts/bolts on my 390? The nuts keep rattling loose and then the bolt destroys my muffler before I realize it’s loose.

@mikenorton62 Год назад

I want one!!

@redman715 Год назад

💪🔥

@torhagen8207 Год назад

Doing my part for that Lamborghini

@jbwilson8287 Год назад

Subbed

@alexstromberg7696 Год назад

Why not just do your thing and let others just be? They want the attention, domt give them that.

@ecstans07 Год назад

Agreed. Stop taking about the haters or "other guys." It detracts from your message and your content. It makes people want to click on to the next video. This isn't me trying to hate on you. It's honest and constructive feedback because you say you want your channel to blow up. If you just seemed like a blow hard I wouldn't say anything, but you seem like a good guy. Every video of yours has the same comments over and over: "stop worrying about the haters and do you thing." That means stop talking about them. Take the advice.

@brucewatson1217 Год назад

Dude you are a bad to the bone you make one hell of a sale I see it in the cut he pushes wood out like nobodies business you keep up your great work because I know you’re doing good I believe in you take care of my friend

@RichFife Год назад

I've been asked to do a video on exactly how I do the a 500i/660... stuffer base clearance, piston clearance, skirt shortening, why I turn the 660 for the ring gaps, etc. I run a 105exh... theory behind that is less rpm in hopes that it doesn't 4 stroke as much... does it help? 🤷‍♂️ But, who cares about what others are doing.... we tune-in to see what you are doing.

@bethanyhaskiell9116 Год назад

The only other person I know of that does the crazy 500i builds is Dyno Joe but he is just machining the cylinder out for a sleeve for the big bore kit

@garykirk1968 Год назад

Dude, I know you're busy as all can be. And it is WAY BELOW your level. But I think you doing a video series on building up those blue Chinese Amazon saws could get you some views brother. Kind of a see if you can turn trash into treasure type deal. Just a thought

@eduardomontes2223 Год назад

Cuanto cuesta esa 500 me gustó como la modificaste

@jtrocktree5409 Год назад

My husky 181 se just lost a crank bearing after 38 years of hard service ,, had to get new , went with 592 artic package ,, broke it in ripping big beech blocks,, with a 28'' bar with skip tooth chain , this saw will twist it up, probably out cut anything in its class stock, it's inthat MO' BETTER Class 👍

@elijahhay811 Год назад

@JOHNSCUSTOMSAWS did you say 75,000$????! That’s fucking crazy buddy!!!! Nice build and I want one 😊

@cocoscorner6419 Год назад

If you're not taking new clients, do you have anyone you'd recommend buying a ported 500i off of?

@HanaBasara Год назад

That muffler is from 461ms?

@yabuddy90210 Год назад

where are you located, Id love to get a few of my saws done by you

@jojohn2542 Год назад

Mister your a good soul and I'm positive that like most you do your best when your doing you , putting yourself first and not showing any reactions to haters p.o.s bullshit ! All the haters are doing is trying to make themselves feel better about what fake , lying cheating pieces of shit they are ! So just do what makes you happy and pray no attention to the petty punks that surround you in every way they can ! Karen's and Kevin's all gta go someday. Your a amazing man and you have a good man that is living his dream and doing what he loves! I'm super excited to see you prosper and admire each beautiful beast you complete ! I'm a 500i Lookey Lew-er and watching your videos makes me feel like almost content not yet owning one , but I've ran one and yeah man , she's a bad ass wood chomping beetch ! I can't imagine what you're must feel and run like ! You are the man ! Thanks again for all your hard work and insight , education and selflessness!

@mrwolf9335 Год назад

Man your saws make me wet at the tip so made up for you and the channel growth the better you do the better im able to satisfy my tool porn addiction 😂😂😂😂 hope this blows up and becomes one of 2023’s fastes growing channels…..onwards and upwards bro

@jbbolts Год назад

wait what? $75,300??

@bullshit2account Год назад

I replayed that a few times to make sure I heard that right

@cbr600rrturbo Год назад

Since you're not taking customer's is there anyone you recommend? I have a ms462 I want ported

@leviwolf5839 Год назад

Look up hot saws 101 on RU-vid

@cbr600rrturbo Год назад

@@leviwolf5839 10-4

@Jason-fg4jr Год назад

$75,300.⁰⁰ usd ??? Did I hear you right???

@ediefreddie5438 Год назад

Did you pay in Greek drachma or something? I’m all for ppl using the money they earn how they want but 75k seems a bit excessive. I know nothing abt saws tho and it might be a “sthil”(pun intended)

@RICHIE_RICH89 7 месяцев назад

Dude i just saw that guys vid claiming he uses the 660 piston and he domes them even though the bitch is still flat lol. I know exactly who your talking about. Shit now i have to go back and check.

@miyagi404 6 дней назад

75k???

@johnnyshell2839 Год назад

Hey brother I hadn't seen anything from you in a while. Did I miss something?

@woos31 Год назад

Damn, no more new customers.............one of these baby gorilla 500s is right up my alley! But when you work your ass off and get to the point you don't "have to" turn out x amount of saws to make ends meet, I don't blame you a bit John. No matter what it is a guy or gal does, there's always gonna be some scumbag to knock off and poach your hard work. The thing is the more you advertise for them pointing them out, they still get attention because people want to see what they did to torque you so they get the attention and maybe even a fraction of said people do business with them so it's win-win. Best thing anyone can do is kill em with kindness or just jog on knowing you're the real innovator, karma will catch them eventually when something goes hen shit and they don't know why because they didn't put in the real work and development

@Jesusiskingamen7 Год назад

You did not pay 75 grand for a chainsaw bro

@adraonbuck Год назад

I’m sure I misheard that as well.. otherwise 🤯🤯🤯

@johndunbar2393 Год назад

It's called sarcasm kiddos.

@austinowens3117 8 месяцев назад

You payed 75k for a saw???

@5150powder Год назад

First by a mile hahaa!!!

@jackthomas4654 Год назад

damn u got me

@EcSsAwS Год назад

I mean it’s the same thing as ironhorse saying he’s the first to do a 86cc 372 chassis Just because your doing it. Don’t mean others can’t too I mean I can call 5 saw builders who trump what you do bud….juuust saying Looks like you were cutting some Doug fir. Or some other pulp wood I ran 2 500i at sawfest that’ll put that to shame…in hardwood tho Seems like for a guy that don’t care about others. You sure do rant and rave about it

@JamesShaff-ys8kt Год назад

Eric Hartman would like his 461 returned you've had it for 2 year's and have stopped all communication with him You are nothing but a thief if you don't return it.