Dell XPS 9500/9510/9520/9530 How to Replace Thermal Paste and Clean the Cooling System

Подписаться 125 тыс.

Просмотров 22 тыс.

50% 1

Dell XPS 9500/9510/9520/9530 How to Replace Thermal Paste and Clean the Cooling System. How to replace thermal paste on Dell XPS 9520. How to replace thermal paste on Dell XPS 9510. How to replace thermal paste on Dell XPS 9500. How to clean the cooling system on Dell XPS 9500. How to clean the cooling system on Dell XPS 9510. How to clean the cooling system on Dell XPS 9520. Dell XPS 9500 thermal throttling solved. Dell XPS 9520 thermal throttling solved. Dell XPS 9520 overheating solved. Dell XPS 9510 overheating solved. Dell XPS 9520 disassembly. Dell XPS 9530 disassembly. Dell XPS 9530 thermal paste replacement. Dell XPS 9530 cooling system cleaning cleaning.
Monetize your Clicks and Downloads: publisher.linkvertise.com/ac/... • LINKVERTISE One of the...
Please Support Me on PATREON: / 2013electronicscomputers
Affiliate links:
Laptop Dell XPS 15 9520: amzn.to/45Wbmuc
Grizzly Thermal paste: amzn.to/3vIpTdf
Compressed air: amzn.to/3HB3sfC
Heat sink for the second SSD: amzn.to/3OWwY0I
Brush: amzn.to/49HOCQ4
Fans: amzn.to/3Q5PZz2
iFixit Tools:
amzn.to/3zYDX4T
amzn.to/3P2OnEX
Thermal Putty UPSIREN U6 PRO/UTP-8/UX: alii.pub/6z6o2q
Thermal pads Grizzly minus Pad:
0.5mm thick: amzn.to/3vEbDCf
1mm thick: amzn.to/3vK3Zq5
1.5mm thick: amzn.to/3PWkdEJ
Thermal pads GELID SOLUTIONS GP-Ultimate: amzn.to/3L08bJd
Soldering/Repair Mat:
amzn.to/3q07HIZ
alii.pub/6g41jp
Recommended hardware for upgrade:
SSDs:
SAMSUNG 970 EVO Plus: amzn.to/3vQYXXc
SAMSUNG 980 PRO: amzn.to/3rdMsS3
SAMSUNG 990 PRO: amzn.to/3YjsOWP
M.2 NGFF (SATA) Samsung 860EVO: amzn.to/3Pwnn2y
RAM modules for XPS 9500:
amzn.to/3rflLyk
amzn.to/33XXYf0
RAM modules for XPS 9510: amzn.to/3B6Qrqy
RAM modules for XPS 9520: amzn.to/3eqRE4R
RAM modules for XPS 9530: amzn.to/469wYTJ

Наука

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@Tigertamer01 4 месяца назад

Thank you so much man, just did it and my computer went from being excessively noisy to dead quiet on startup. Much appreciated !!

@ElectronicsComputers 4 месяца назад

Great job! I'm happy to help.

@-_-SpongeBob Год назад

Finally!! A bloke who knows what he's doing!!... I love ya mate

@ElectronicsComputers Год назад

Thank you for the comment!

@mhzburglar8756 Год назад

This is the only video/resource I've found that actually shows which thermal pad thickness is needed on which parts of the cooler. Thank you for showing that! I have now ordered some Thermal Grizzly pads and Kryonaut Extreme paste with the hopes of getting my brand new work laptop to no longer double as a space heater just from booting Windows.

@ElectronicsComputers Год назад

Glad it was helpful!

@xVoidCypher 8 месяцев назад

How'd it end up?

@sidhaarthm Год назад

Thank you very much for this informative and detailed video. Courtesy of your guidance and excellent video, I was able to successfully repaste as well as upgrade the thermal pads on my XPS 15 9520 👌🏻

@ElectronicsComputers Год назад

Glad it helped!

@PierreSchmitt 10 месяцев назад

Thank you so soooo much, I followed every steps in your video and now the overheating problem is solved on my xps!

@ElectronicsComputers 10 месяцев назад

Great job! Glad it helped!

@jasonsharen1109 Год назад

Great video, man. I also have XPS 15 9520 which gets hot like crazy and I didn't know about those thermal or performance modes. Thanks for the video!

@ElectronicsComputers Год назад

Thank you for the comment! I'm happy to help 😊.

@razvanyke Год назад

Awesome video, man ! Cheers

@ElectronicsComputers Год назад

Thank you

@Frank-Thoresen Год назад

Thank you 👍

@ElectronicsComputers Год назад

You are welcome

@vintageboulton Год назад

This helped me so much, thank you 🙏

@ElectronicsComputers Год назад

Glad it helped!

@justethical280 Год назад

Perfectly executed

@ElectronicsComputers Год назад

Thanks!

@SoyDimo 7 месяцев назад

Muchas gracias, con tu video fue fácil de hacer.

@ElectronicsComputers 7 месяцев назад

¡Estoy feliz de ayudar!

@schrodingerscat1863 5 месяцев назад

I have a 9700 and the same process is valid for that too. I had no end of overheating problems until I repasted and reseated the vapour chamber cooler. Paste job on most Dell laptops is terrible.

@ElectronicsComputers 5 месяцев назад

Great job!

@Tamirallamiro 3 месяца назад

this is great thanks I was able to install a new 4TB ssd and changed the thermal and it become so quite on startup.

@ElectronicsComputers 3 месяца назад

Great job! Glad it helped.

@muneebkhan8881 10 месяцев назад

hey, whats your opinion on the New Honeywell PTM 7950 pads that people have started using instead of paste for the CPUs, theyre apparently 8.5W/Mk so they can actually handle temps real well.

@ElectronicsComputers 10 месяцев назад

Grizzly Kryonaut = 12.5 W/mk, Grizzly Conductonaut (Liquid Metal) = 73.0 W/mk. The cool thing about Honeywell is that it's very easy to apply but apart from that I don't see any reasons to switch to that thermal solution.

@spiderofthehood6127 6 месяцев назад

@@ElectronicsComputers Because it's almost as good as LM without the intervals

@Mr.E-jv6rd Год назад

Hello, for the thermal pads, is there any harm or advantage in using the 12.8W/mK or the 15W/mK instead of the 8W/mK? Thank you for the video, trying this next week with TPM 7950 pads instead of paste.

@ElectronicsComputers Год назад

The higher the better. Nowadays we use GELID Solutions gp-ultimate 15W/MK which last very long and that's what we recommend to use. alii.pub/6oy399

@michalislazaratos6928 Год назад

For the XPS 15 9560, are 1.5mm thermal pads too thick for the 4 large chips under the heatsink? Should I get 0.5mm instead?

@ElectronicsComputers Год назад

For the XPS 9560 you need 1.5mm thick pads.

@michalislazaratos6928 Год назад

@@ElectronicsComputers Thank you very much for the clarification. Many say that 1.5mm is too thick for the 4 chips under the pipes, and will not allow for contact between the heatpipes and the chips. Good to know it will work.

@jliu6735 Год назад

Thanks. Event the official disassembly service manual does not tell the thickness of the thermal pads.

@ElectronicsComputers Год назад

I'm happy to help!

@redabdab 3 месяца назад

Thanks for this. One of my 8 cover screws has stripped (as the torx5 is very fine). So I can’t remove the cover. Any suggestions?

@ElectronicsComputers 3 месяца назад

In such cases we use flat-head screwdriver with sharp edges or a screw removal kit like this: alii.pub/6xnq6q

@AM-yi7xr 3 месяца назад

Do you recommend the same thermal pad thicknesses as in the video for the XPS 15 9530 also? Dell claims they use 1.5mm thickness for all thermal pads in 9530. If the thermal pads are not damaged, is there any reason to replace them with GELID GP Ultimate 15W? To me, it seems like the extra conductivity of these pads might not make a difference. I notice in your video that you do not replace your thermal pads; you left the original pads in place.

@ElectronicsComputers 3 месяца назад

It's up to you whether to replace those pads or not, but in reality, it won't make any difference. The original ones are not bad, but those chips don't generate much heat in the first place. Just apply the best thermal paste to the GPU and CPU (don't use liquid metal), and your laptop will be happy and will last long. Also, in the Dell Power Management console, make sure that your cooling profile is not set to silent. In that mode fans turn on when the chips are nearing 80°C. Set it to cool or high performance.

@thyNtran5755 Год назад

Will this tutorial for the thermal pad applicable for XPS 15 (9570). Thank you!

@ElectronicsComputers Год назад

The process is very similar.

@LegalHotdog 7 месяцев назад

Do you use two different types of thermal paste for the gpu/cpu?

@ElectronicsComputers 7 месяцев назад

No, it's the same paste. There's no need to use different paste.

@LegalHotdog 7 месяцев назад

@@ElectronicsComputers thanks!!

@peymanucf 4 месяца назад

my Dell precision 5570 fans are always run. my laptop built in April 2023 and it seems that thermal system is still clean. but during normal work such as internet exploring, both fan brought in service. if i will replace thermal paste, my problem to be solved?

@ElectronicsComputers 4 месяца назад

Try to check the temperature of your CPU/GPU with some software like AIDA64. You an download it for free from my Patreon page. If the temperature is over 70C, then replace the thermal paste.

@peymanucf 4 месяца назад

@@ElectronicsComputersthank you.

@johnny_duke Год назад

I have a new XPS 17 (9730). Is this tutorial applicable?

@ElectronicsComputers Год назад

The process of removing the back cover is the same the rest is different. That model has different heat sink and different thermal pads thickness.

@minoramartinez7165 10 месяцев назад

out of curiosity, can you upgrade the cpu in this model of xps?

@ElectronicsComputers 10 месяцев назад

Only if you have an infrared rework station. ABout 10 years ago all CPU were easily upgradable by a user, nowadays WiFi adapters, CPU and GPU are soldered to the board. Some companies like Apple even solder SSD and RAM to the board.

@fernandez9765 4 месяца назад

Quick question would it be possible to solder and upgrade the vram on this laptop

@Goblinator 3 месяца назад

How many grams of thermal paste should I buy?

@ElectronicsComputers 3 месяца назад

The smallest one, 2 gramms is more than enough.

@sjareld 8 месяцев назад

Hey, is this applicable to 9530?

@ElectronicsComputers 8 месяцев назад

Yes, the same process.

@jasonl1014 Год назад

Will spreading the thermal paste cause air bubbles?

@ElectronicsComputers Год назад

No, if you do it right.

@theorganizationXII Год назад

@@ElectronicsComputers I never spread the thermal paste with a palette. Should I just go with the classic grain and press the cooler or you suggest to still spread it a little before that?

@ElectronicsComputers Год назад

@theorganizationXII I used a piece of glass to show you what's going on under the heatsink with different application methods. Technically, any method will do the job. The question is how good.

@Eugenetra7 Год назад

@@ElectronicsComputers +1. With spreading you have total control, with grain you don't see anything after you cover the chip with the heat sink. Could you please explain the heat sink screws tightening method? Do you screw in 1-2-3-4, one by one to till the end or first screw them in lightly and then tightening? Trying to do that with my 9570, not very effective as yet.

@8peterp 29 дней назад

107C! before ,this could be reason of Thermal trip detected bios error

@ElectronicsComputers 29 дней назад

Yeah, it's critically high temperature.

@richard5959 6 месяцев назад

The gpu hotspot went from 59 degrees to 71 degrees ... What happened?

@ElectronicsComputers 6 месяцев назад

It was 82C degrees before, so what's surprising you?

@xVoidCypher 8 месяцев назад

Is a fan upgade a thought worth entertaining?

@ElectronicsComputers 8 месяцев назад

You can't upgrade the fun. But you can adjust it speed in Dell Power Management app.

@xVoidCypher 8 месяцев назад

@ElectronicsComputers I'd love to see if someone would 3d print the chamber

@vilennnnubb5071 Год назад

Hey bro can you please help me I have other issue? I don't remember my Admin account password and my laptop goes on automatic repair and disgoising process and if I do anything option like system restore or like that it ask for password of Admin account and as I mentioned that I forget password. Can you please please give me any solution regarding this? Waiting for your reply ♥️

@ElectronicsComputers Год назад

Watch my new updated video for Windows 10 and Windows 11 which explains how to reset PIN, password and how to deal with Microsoft account: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--0crAEE-6hA.html