The BEST mod I've ever seen....

Подписаться 389 тыс.

Просмотров 385 тыс.

50% 1

Today, we're fixing Dell's mistakes... Get an exclusive @Surfshark deal! Enter promo code ZACBUILDS for an extra 3 months free at surfshark.deals/zacbuilds
Get the CNC + 3D Print files for this project here: www.etsy.com/ca/listing/15074...
Join me on Patreon: / zacbuilds
Patron's get ad-free early access to all of my videos + More
Links to all of the tools from this video (All of the below are affiliate links)
My Laptop (LOL) - amzn.to/3CAcx5Q
X-Carve Pro - www.inventables.com/technolog...
Dell WD22TB4 Dock - amzn.to/3NCnBWz
Noctua NFA20 V5 - amzn.to/433UtMB
K5 Pro - amzn.to/3Njvxuz
Noctua Thermal Paste - amzn.to/3NjvJKj
iFixit Tool kit - amzn.to/3NBRyWF
Irwin Automatic Wire Stripper - amzn.to/3NCPAFy
FLIR Thermal Camera - amzn.to/42T0FXs
Bosch 12" Mitersaw - amzn.to/3NiHyAe
8 Inch Benchtop Jointer - amzn.to/3Xd3XDL
Pony Jorgensen Cabinet Master Clamps - amzn.to/3NDAVKs
Micro Jig Gripper Pushblock - amzn.to/3PhICXV
Tight Bond 3 Wood Glue - amzn.to/46ea8f2
Color Match CA Glue - amzn.to/3qTYoxZ
Chisels - amzn.to/3NCPAFy
12" Drill press - amzn.to/3CAADxl
The Wood Finish I used - amzn.to/3Jm0LzS
Mirka Sander - amzn.to/42PlGlK
5V Switch - amzn.to/3Ptp96q
Solder Station - amzn.to/3PlsQLJ
All of the Music and SFX I use comes from: www.epidemicsound.com/referra...
Edited by Brycen Roy (IG: / brycenroy )
All My Filming Gear:
kit.co/ZacBuilds
Check me out on Instagram - @ZacBuilds
/ zacbuilds
Use code ZACBUILDS10 at www.badnorthamerica.com for 10% off favorite work gear
Check out my website for all past projects:
www.zacbuilds.com

Хобби

Опубликовано:

19 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 909

@ZacBuilds 11 месяцев назад

Get an exclusive @Surfshark deal! Enter promo code ZACBUILDS for an extra 3 months free at surfshark.deals/zacbuilds

@X862go 11 месяцев назад

Agreed I have a zephyrese g14 and that thing cooks. Selling it for 45wat apu laptop. At least the performance will be more stable, then the heat from RTX anything.

@ilikegpu 11 месяцев назад

framework laptops

@Tailslol 11 месяцев назад

Good idea the angle but all those angled cooler are known to off center the laptop fans after a while making them noisier and damaging the fans in the end. Better go with a more neutral angle design for long term use.

@benkayvfalsifier3817 11 месяцев назад

If you are going to be modding your N-Switch, then I expect you to replace the Joy-Con plastic covers with *wewd.* Otherwise, I will be very disappointed in you.

@BixxPlays 10 месяцев назад

i recommend a framework laptop. it might even be the last laptop you buy.

@WoodwardIII 11 месяцев назад

For reference, the reason why laptops don’t dump heat into the outer chassis directly is generally so that the batteries don’t overheat, which is a fire hazard. (source: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eS_MVDoaIoM.html) Edit: In addition, there are also regulations about how hot surfaces can get so that they don't burn you.

@JanJanJanJanJanJanJanJanJan2 10 месяцев назад

Also there are regulations on how hot touchable surfaces are allowed to get.

@latitzouri 7 месяцев назад

@@JanJanJanJanJanJanJanJanJan2cooking steak on the back o my laptop go brrrrrrrrrrrrr 😎

@djmccullough9233 3 месяца назад

Laptops are limited in the amount of heat they are allowed to dissipate through the chassis outer shell to prevent burns, that particular limitation has little to nothing to do with battery protection.

@DantePowell 3 месяца назад

and you know, you dont want to burn your legs if you had them on your lap. just saying.

@onyxx300_ 3 месяца назад

Intel MacBook Pros be like: what regulations?

@jessedemps 11 месяцев назад

You should get a Framework laptop

@ZacBuilds 11 месяцев назад

Just waiting for the Framework 16 to drop!

@jessedemps 11 месяцев назад

Thi is the first heart I have ever gotten

@alexmendiola 11 месяцев назад

I just got my framework and it's the bee's knees. Plus, better for the environment and I'm not worried about obsolescence!

@scarecrow5848 11 месяцев назад

@@ZacBuildsmake sure you get the AMD version.

@AdamKueflef 11 месяцев назад

@@ZacBuildsSo I'm not the only one waiting to upgrade

@JeffKraschinski1969 10 месяцев назад

From what I can see, it looks like the Thunderport hub kind of blocks the air intake in the fan as well, so that might be worth a redesign. Also making the top removable so that whenb the fan eventually dies you can replace it without busting apart a glued piece

@lostapostle76 6 месяцев назад

Yep. Rule of thumb with fans is at least an inch of space in front of them to allow flow. Only instance I've seen in 40 years of doing support where it isn't involves rifle bearing fans. You don't want rifle bearing fans.

@PyspherE 5 месяцев назад

Considering there is likely much more resistance on the push side finding gaps out from under the laptop i highly doubt there is much, if any, flow constriction happening on the pull side where the hub is located. also if the stand is for this particular model of laptop and hes already shown its power limited and not thermo limited then any improvments to airflow are largely moot. would be nice if the fan was more easily replaceable, although an offset phillips driver (looks like a hex/allen key) should probably get the job done in the current config but would still be a PITA.

@tradingnichols2255 5 месяцев назад

Noctua fans usually last 10 years plus so....

@user-cg5xv4zz2b 4 месяца назад

I had the same thought and would make this change. I would move the connection hub so that the edge of the hub matches ( or close ) to the edge of the 'projet'. Since the top is at an incline, this would make more airspace for the fan. I do not believe that this would break the looks of the 'project'.

@techguypaul 2 месяца назад

Also some Thunderbolt hubs can get very hot themselves, so then it's pulling hot air onto the hot laptop.

@GeekOfAllThings 11 месяцев назад

Given your penchant for customizing, I'd say you should get a Framework laptop 16 when orders open up. Completely customizable IO and all replaceable parts. It'll even have an expansion bay for a replaceable internal video card.

@feeterican 11 месяцев назад

I said somewhat of the same thing about Framework and also Clevo.

@glittalogik 11 месяцев назад

+1 for Framework. Entirely aside from customizability, their whole take on reusability is SO overdue for the laptop industry. I was sold the moment I saw how easy they'd made it to rehouse the internals into a standalone mini-PC.

@jonathanzimmer8143 9 месяцев назад

I just fixed up an old Elitebook 2560p, one of the last socketed laptops. The thing came with 4 gigs of RAM but now has 16, and i5 only kind of upgrades to i7 (2nd gen only😢), but then the peripheral slots are just insane. eSATA, swappable dvd drive, DisplayPort, SD slot, PC Express slot (thankfully there are cool cards for), m.2e X 3- ethernet card, swappable wifi card,also a sim slot and cell card. Dedicated docking port. Oh, and smart card for biz security. It's no Framework, but it is built to stay relevant 12 years later. It does. It crushes at music production. I got this out of the garbage, dude. This mission is loooong overdue.

@CarbonPhoenix96 9 месяцев назад

@@feetericani do not recommend Clevo. I used to work on them often

@jmwilsoND 9 месяцев назад

@@feetericanThe 16" framework seems like it could have the specs he needs to replace the dell. But I wouldn't want to go all in on the AMD 7700s which is arriving on the 16. As a prior Asus G55 owner, I've been burned by the MXM hype. Framework seems more dedicated and likely to acheieve the upgradable GPU goal, but I wouldn't bet against history yet.

@willlucas5150 11 месяцев назад

Would also be interesting to see how it would compare with all the internal cooling mods and using the body as a heat sink but without the big cooling stand.

@ZacBuilds 11 месяцев назад

Ah damn, I didnt even think to run that benchmark. Next time!

@willlucas5150 11 месяцев назад

@ZacBuilds not too late. Run the test and update the description

@willlucas5150 11 месяцев назад

Sounds demanding lol. Not meaning to be like that. But this is actually a good idea I haven't seen before

@febrianadji5758 11 месяцев назад

Idk on Dell But there's a ton of that in MacBook The main problem by solely using the body without external cooling is that you also heats up battery and SSD

@robertcastillo90 9 месяцев назад

Yeah, was disappointed he didn't show that. Really wanted to know becuase maybe the big fan isn't worth it for those of us who would be OK with doing all that. Also be careful with pass, I'm not too familiar with that pudy product you used. But another tech ch, jayztwocents, removed the pads from his ram and put paste and it turned out the pad was also there to bridge the gap on the cooler. His issue was it was a huge heatsink which included the ram and was just mm higher on some places.

@FlameSoulis 7 месяцев назад

Not sure if you check older videos, but regarding the Dell Dock: you can get right angle adapters to reduce the strain on the USB C port. Additionally, the docks usually have a power button, which can turn the laptop on. In my setup, I 3D printed a side shelf that holds the laptop on the side of my desk, giving me the entire desk for use. So basically, something akin to what you did with the drawer, but more barebones.

@briturner11 11 месяцев назад

Your content is some of my favorite combination of "computer nerd" and "wood working maker".

@theumpteenthtime8854 4 месяца назад

Dude invented a desktop.

@jvcouk 9 месяцев назад

I did similar for my XPS 9560 (i7-7700HQ, 1050) a couple of years ago, with some differences: no external fan, I made a thermal bridge from the VRMs to bare heatpipes, undervolted the CPU 0.12V, put fine mesh over the intakes (to eliminate dust), and resting it on a dowell bar near the rubber strip to stop hot air recirculating into the intake. As a result, it only hits around 85'C with a GPU game or CPU-intensive work, and the power delivery stays higher. There were other tweaks, like also using ThrottleStop to improve responsiveness for DAW work. So if you want to improve on what you already have, maybe try undervolting, if your system allows it.

@christianrobinson4526 11 месяцев назад

You're my favorite youtuber right now. You woodwork, build computer/electronic/emulation stuff, and longboard. All of which are things I like to do! I've been 30 mph on a longboard, built my own PC, built an arcade style emulator with the big joysticks, and I make some money on the side woodworking. I think you may be my spirit animal 😂

@ZacBuilds 11 месяцев назад

Hell ya! That's the best feedback I could get. Hopefully some more of our future projects sync up

@ian3314 11 месяцев назад

Thats awesome! Love the look of it and that magnet into the cupboard is soo slick.

@scarface406 11 месяцев назад

Cool! you should also try undervolting you cpu and gpu aswell as lowering you're minimum processor state and changing the turbo from aggressive to enabled this should increase the power ALOT more

@CrapkinsTheBrave 10 месяцев назад

My only note is that there are plenty of existing laptop cooling pad devices that have spare room inside their chassis that could fit the dock if you swapped out their fans for that nice one. Many of them even have fan controllers built-in. You would end up with a more comfortable purpose-built device by cobbling something together rather than building it from scratch in this case.

@willsside1 11 месяцев назад

I love your videos on upgrading / hacking your tech! That cinebench score improvement is insane. For new laptops I have my eye on the new framework laptop!

@ZacBuilds 11 месяцев назад

Thanks man! And me too, I'm waiting to see what their 16 inch model can do!

@watercannonscollaboration2281 11 месяцев назад

That a lot of nice thermal mods, I never had good experiences repasting my XPS17 9710 (I tried MX5 and GC Extreme and thermals were worse until I switched to Honeywell PTM, that made a huge improvement), but pretty awesome to see the before and after, and considering that Intel/Dell boosts these CPUs to over 100W (at least in my experience with the XPS 17 9710), the fact you can get it to power limit throttle is kinda amazing

@flat_stickproductions209 6 месяцев назад

It's so wild to see my PTM experiment has made it this far. We talked about it in Discord then I purchased some from a sketchy Chinese shop and the PTM revolution was born.

@Souloux 11 месяцев назад

I recently finished building a cooling pad with 3 120mm Noctua NF-P12 redux fans and Noctua NA-FC1 fan controller. It works great, can be a bit loud but way better than any previous ones I've owned.

@ZacBuilds 11 месяцев назад

Ya most laptop cooling pads are really loud anyways. This 200mm fan is crazy quiet. I should've talked more about it, but you cant really hear it until you get within 12" inches of it and even then it's just a whisper. The built in fans inside the laptop are WAY louder haha.

@TheOmegaRiddler 10 месяцев назад

I'd like to see what you could do with a framework laptop, especially when you upgrade one because of what you'll do with the old board.

@beforedrrdpr 11 месяцев назад

Would love to see a video on how you come up with these ideas, especially how you know if it'll work or not?

@ZacBuilds 11 месяцев назад

Huh that's an interesting idea. Basically I just look for problems I'm having in my own life. "Wish my laptop didnt overheat so badly.....Hmmm, I bet I can fix that with a DIY project" The fun part is I almost never know if they will work or not. It keeps the whole thing interesting from start to finish for me, and hopefully for you and everyone else at home too!

@2hottdoggy 11 месяцев назад

Wonderful builds Zac! 👍🏾👍🏾

@itsmilan4069 11 месяцев назад

Cooling pads do work great if your laptop has proper air intake underneath (unlike the one shown in this video where the vents are at the bottom)

@FrostKing104 10 месяцев назад

Dude this whole time watching your channel I've loved that you use hexagons because I'm a CGP Grey fan. Who'd have thought you used them for the same reason. So cool. Hexagons are the bestagons :p

@cameronkennedy7820 11 месяцев назад

Designing in external radii to those tenon joints that have about a 5-10% clearance on the internal radii will eliminate the need to do manual chisel work

@edwardzooby5548 9 месяцев назад

I’d like to see the performance upgrade with just the fan, just the improved thermal paste, and then the combination. Awesome build though!

@ianhaylock7409 9 месяцев назад

He didn't want you to find out that all the extra performance came from the work he did on the laptop, and not from his laptop stand.

@tradingnichols2255 5 месяцев назад

LOL, funny, in another part of the comments he said he didn't even think of benchmarking anything else, "good idea!" That last bit might not be paraphrasing so I put it in quotes, lol. @@ianhaylock7409

@tradingnichols2255 5 месяцев назад

We all probably have different laptops, and that putty is a pain if you ever want to redo it so.... all I did was use mx-4 on my gpu and cpu under the cooler And replaced what Asus did with thermal puddy, with really high end thermal pads. I reinstalled my cpu/gpu cooler, and immediately uninstalled, of course my thermal paste was fine, the only thing you can do is use too little and since I normally repaste full sized GPU's I used too much. Cleaned up the edges a bit - that wouldn't have mattered. Checked the thermal pads that they were all indented by the memory a little, but not too much. Refettied as necessary, rechecked for fit. Reassembled. You see, about the thermal pads imprinting, heavy imprints and you may reduce pressure on the CPU/GPU points because the thermal pads are too thick, which could cause their temps to go up or even severely overheat them. When I was done my laptop was flying fast. I mean flying fast. It's still faster than the day I bought it 5 years ago. Curios about what happened, I looked it up online and found out "everybody" talking about how much faster this laptop is, even new out of the box with new thermals. Oh, well at least 2 years later I started in on that performance!

@yazzmatazz86 10 месяцев назад

I loved this so much. Besides benchmarks, did you notice improvements to gaming? I've wanted to do something similar for my 16" 2019 macbook pro for a while now (sans woodworking). That laptop is horribly thermally throttled and has very little in the way of venting. I bought a spare backplate and my plan was to drill some venting holes into the backplate and use a massive fan to blow some cool over the CPU/GPU heatpipes as well as the VRMs. Ever the procrastinator, I put this off for a while and sadly my macbook died a few weeks ago. Ironically, I think it was killed by overheating, since in the weeks before it died I noticed that my CPU was running at over 90C while gaming which was strange since it would always throttle at around 85C in the past.

@anon_y_mousse 11 месяцев назад

As far as common, North American woods go, walnut is definitely the best. If you're looking for portability then I'd suggest Framework since upgrading will be easier than with others.

@ZacBuilds 11 месяцев назад

I love the whole Framework ethos, but for video editing a dedicated GPU is a big factor. I'm eagerly awaiting the release of the 16" inch version.

@thatwasonce 10 месяцев назад

@@ZacBuilds it's up for preorders now

@andymuzzo8568 11 месяцев назад

Nice work. I built one of these for my dell 7760 a year ago and it made a huge difference

@michaeldisante5145 9 месяцев назад

Hi Zac, I have been rocking a MSI Gaming GT72 6QD(Dominator G)-249UK for 10 years now and it has been rock solid. I've upgraded the storage to 6TB of internal SSD storage, bumped the RAM to 64GB and configured the system to dual boot Windows 10 and Linux Mint. I have a desktop that I use for gaming now, but this laptop still performs very well for development duties and general use. If the newer MSI systems are as solid as this thing, hard to go wrong. Another system I have considered is the new Framework 16 laptop. It can be stripped down to a bare chasis with one included tool and everything on this laptop may be user serviced/upgraded. The ports may be configured as desired and there is a dedicated bay for a graphics card. Looks to be well engineered.

@dirkth8556 11 месяцев назад

MacBook pro m2 is crazy efficient and you can directly use that cooler because it’s also full aluminium

@ToolShow 11 месяцев назад

Super cool project Zac! The magnets for the drawer mount were a nice surprise.

@ZacBuilds 11 месяцев назад

Haha thanks you! I've been trying to incorporate bonus features into all my projects now.

@ferna2294 6 месяцев назад

You might have just helped me solve an issue with a Dell Precision. Thank you!

@kayt_was_taken 10 месяцев назад

I'd love to see what you could do with a Framework laptop! After seeing this video I'm thinking of trying those mods on my own...

@secondnikos 11 месяцев назад

Very nice outcome! Got some usefull ideas! Same situation with my XPS too. Quite a lot of problems. Switched to Thinkpad; quite pleased with it so far

@ZacBuilds 11 месяцев назад

Definitely considering some other Lenovo devices!

@RisingRevengeance 11 месяцев назад

I have quite a few thinkpads that I really like. The ones I use daily are my X1 Carbon(gen 4) and a T450s, both are a few years old but still work well and are solid af.

@bobbybyrne1899 11 месяцев назад

The new Framework 13 or 16 would be my choice for a new laptop

@ZacBuilds 11 месяцев назад

Waiting on that 16 to drop!

@83n80y 2 месяца назад

As a tech that fixes laptops, I can safely say that there isn't a flawless laptop manufacturer. All brands have issues and even have some that are lemons. I would say it's more about keeping the vents and fans clean inside, not ever using mechanical hard drives (use SSDs and NVMe SSDs), and doing research on a per model basis based on your budget. Of course, like Zac recommends, having an external cooler will help it run cooler, faster and last much longer. If you're having issues, 8 times out of 10 it's the mechanical hard drive. Replace that with an SSD and you're likely good to go. The other is the 2 times is either the CPU cooler/fan or power issue. The CPU fan/heatsink gets filled with lint and dust. Just clean it out and it'll cool much better. Power issues come from the DC Jack being bent/broken or the battery doesn't hold much of a charge. In either of those power issues those parts would need to be replaced. Of course, there can be other random issues but they're much more rare. They instead tend to be from wear and tear (cracked screen, spilled something on the keyboard, trackpad worn out, cracked plastics/frame). In other words, lemons can happen but unless it's a manufacturing issue it's less likely it's a problem with all of that model or brand. Again, just make sure it has an SSD instead of a HDD and you're off to a good start.

@joshuascholar3220 5 месяцев назад

I use a cheap HP gaming laptop that has had nothing but overheating problems. I've replaced the thermal paste many times (I do it every time the laptop freezes up, presumably from heat). I finally tried replacing the paste with PMT7950 phase change thermal pads. They're hard to work with, but they improved the laptop as much as I could have hoped for.

@tjesnaps 11 месяцев назад

This was a breath of fresh air! Great to see someone thinking outside the box ;)

@ZacBuilds 11 месяцев назад

Glad you enjoyed it :)

@weksauce 6 месяцев назад

Go framework.

@shoichikiseragi8450 9 месяцев назад

if your looking at laptop options id really recommend the framework brand laptops they are a bit new but the customize-ability and potential their laptops have is astronomical

@BalkanSlav 9 месяцев назад

Don't know about that dell TB dock specifically but I know other docks get really really hot and since your fan is pulling air directly from it, I would think it decreases the cooling potential at least a bit. Otherwise great vid! I will probably do the part with removing the stickers from the bottom inner part of the bottom cover and adding some thermal pads to my Lenovo Thinkbook 14S Yoga Gen2 (great laptop line in case you want to switch btw). I will however skip the repasting of the CPU and GPU + the laptop stand as when I use my laptop docked I use it bent backwards (love using 2 in 1 laptops like that as it allows for having a keyboard right in front of the screen which is placed below my monitor - ez stacked display setup)

@sameerakhtari9962 11 месяцев назад

I was about to ask that did noctua paid every youtuber to use their big fan xD then you made logo hider xD ..love to see that you are using this product because of performance , not for money . Also love to see that you are now in tech too..

@ZacBuilds 11 месяцев назад

Haha one day maybe, but for now I'm paying out of pocket like everyone else. I just like their products and their color scheme is a good match for walnut :)

@Zockmock 11 месяцев назад

Have a look into framework laptops. I think you'll really like them.

@ZacBuilds 11 месяцев назад

I'm eagerly awaiting the release of the Framework 16!

@Zockmock 11 месяцев назад

@@ZacBuilds yeah and I think it's gonna be great. Linus showed it a couple of days ago but I think you already know that 😄

@mados123 6 месяцев назад

Great build. What other problems are you having with the Dell? Also, while very unlikely, what if you have to replace the fan? (With the pieces glued I think.)

@avici0182 5 месяцев назад

Came here to learn how to cool a laptop, ended up knowing a bit about woodcrafting, CNC and 3d printers. Subbed!

@ebrahimnalla121 9 месяцев назад

would love to see a framework laptop and what you do to make it better

@matthysloedolff 11 месяцев назад

Great video, Zac. I am also not a big fan of Dell. Had a work Dell computer and since day 1 it would either throw a blue screen of death, freeze up randomly, become very light randomly, or sound like a jet taking off when not really doing computationally strenuous tasks. I now have an HP laptop for work and I'm happy with it for the most part. The one major concern I have is the shell feels a bit too flexible for my liking. Think iPhone Bendgate.

@albertwesker4266 10 месяцев назад

Thats a good use of k5pro BUT good luck cleaning it in the future What kind of wood did You use to build laptop cooler ?

@kevink7087 11 месяцев назад

nice build! I might've missed it, but what was the temperature difference before/after?

@hyde8118 10 месяцев назад

I think your setup would look more complete if you will use L-shaped USB-C connector, so cable will be looking more neat outside of the dock

@vmafarah9473 11 месяцев назад

You should have made a custom table with a hole in the middle you could place the laptop into that hole which prevent intake air and exhaust air mixing .with a build in fan below the table to further ease the air intake. You may also try water cooled laptop lid.

@calvinaluma 11 месяцев назад

i am sorry i dint get to your channel earlier... i love your content and the hard work and love you put to it

@silversonic1 4 месяца назад

Laptop cooling pads do work, just not as directly as you might want. By cooling the shell, it means the air that does go into the inlets isn't being heated as severely while it travels under and into your laptop, meaning the air that goes in can then grab more heat before going out. Not to mention it distances the laptop from other heat, ie your lap if you use it according to its name.

@mehokodro09 20 часов назад

Opening the service panel on your laptop doesn't void your warranty. In fact, in the US, it is illegal to deny your warranty if warranty stickers are torn or broken, according to the Magnuson-Moss Warranty Act of 1975. This was reinforced by the FTC in a 2018 case.

@omar.r.d9016 11 месяцев назад

I started thinking to do the same for my laptop ,nice mod

@Puff3in 10 месяцев назад

Hi, I like the wood designs even though a Cooler Master 23 would've done the job. For a new laptop I would recommend a Razer Blade Pro 17. The reason for that is the extra fan or fans used at the bottom for intake, meant to move the hot air generated over the board, and push it to the exhaust. Some models have one bottom fan, and some others have 2, making the device a 3, and also a 4 fan laptop that is both cooler than most, and more quiet. Consider it ✌

@ytvandre 6 месяцев назад

Do you have a link for that cooling pad ? Not coming back in Google

@SJSSawdust 11 месяцев назад

Hey Zac, Easel has a feature that adds dog bones to box joints that allows them to fit snugly right off the machine, so you don’t have to mess with the joint - saves time

@trapvandal 11 месяцев назад

This is wicked build. I'm totally sad my laptop isn't aluminum now and I can't just do your thermal paste mod without even building this dock.

@asianflex 10 месяцев назад

have you consideered dremeling part of the plastic over where the heatsink is and using copper shims to make a little copper plate as a part of the chassis?

@trapvandal 10 месяцев назад

@@asianflex that's a bold mod but definitely something to think about

@TigTex 6 месяцев назад

That Noctua thermal compound that you've used suffers from pump out really quickly. Make sure to monitor those temperatures because I expect them to degrade a lot in the following weeks/months. Consider using reliable stuff such as PTM7950. Undervolting the CPU and GPU might also give you a measurable boost in performance due to a decrease in thermal output

@tristanwegner 5 месяцев назад

Yes. With the flexing happening in a laptop from regular use, I expect the movement between the case and the cooler to pump the compound away to the sides.

@Moodyfn 9 месяцев назад

i have a feeling it migjt be hard to clean the fan if it gets dusty. Either way nice build tho and the charging dock idea was really cool

@brake_4_cake 9 месяцев назад

Use rubber rivet mounts for the fan, it'll kill any residual vibrations and noise

@Tailslol 11 месяцев назад

@mikhailvizconde2194 10 месяцев назад

I was really surpirsed at the big jump in the cinebench points just for cooling. Unfortunately i have plastic bottom and a not so good heatsink.

@user-pq4by2rq9y 10 месяцев назад

I am all for thin and light laptops but I really don't want to give up cooling to have that.

@petebean2387 4 месяца назад

I have a question: My laptop (Acer Aspire 5) overheats too and I put Arctic MX-6 Thermal Paste in between the graphics and processor, but is K5 Pro thermal putty better? I want to try also using the thermal putty on the exposed heat sink like you did. Or is a thermal pad better? And is it ok to put it directly on the exposed copper pipe, as that is where my laptop gets super hot. Also I was thinking about cutting out a few more air gaps as well in the bottom as well. Would that make an increase in performance and decrease the temperature from around 60 degrees Celsius when it's not doing much?

@danielkutomi 6 месяцев назад

This reminds me of my laptop which fan is not near the heatsink, but actually is in the lower opening (the case makes a corridor so that the air current is made until the exit). Not a suprise, but it overheats (even when lifted up), so I bought one of those external laptop fans that goes on the side of the laptop (it stopped overheating 😊)

@ad.i 11 месяцев назад

18:09 YEAH, FRAMEWORK. I have had a few problems with this thing, but not only is their customer support god tier, but the damn thing is so open that I'm usually able to fix it myself with just looking at the internals.

@alk3myst 9 месяцев назад

Man checking out your vids tonight. Nice shop and woodwork.

@PsycoFlipside 7 месяцев назад

I modded my 2016 XPS 9550 in a similar way because back then, VRMs in XPS's didn't have a heatsink and the laptop couldn't run any games for more than 5 minutes. Temps massively dropped but what ended up happening is that the rubber feet melted and made a hell of a sticky mess

@Notfound4747 11 месяцев назад

HI Zac, I would like to ask you something, when using Trottle top you can go to the TPL , tab , and use this config, . Uncheck the disable Contronls option on ,Power Limit Controls, Than uncheck PL2, and use just PL1, CLAMP both , PL2 and PL1 , and on the Watts put 100 W and try again.I almost forgot push the slide TURBO TIME LIMIT to the max right, probably placebo but is nice the big number and if you the thermals still are in the high 88 90 celcios , put some liquid metal. I discoverd this on my legion y540. mine is a i7 and rtx 2060 I tried to do the same on my friends acer nitro, but as his is and i5, it seams the PL settings are completed locked, and to make it go Vroom, go to the FIVR, and check CPU CORE, CPU CACHE, INTEL INTEL GPU , AND IGPU UNSLICE, on all of this sub tabs go to ICCMAX and shove the slide to the right making it 255 A, the eletrical design of the laptop will not allow to make past its limits but this helps , unlock the limits and stops the yellow lights of frustration, and some undervolting on the cache and core VOLTAGE OFFSET can help a lot

@NeutronicalGaming 9 месяцев назад

I did this years ago to play wow on a mid range laptop, worked great then, probably works even better these days since everything is thermally limited and boosts by default, you don't even need to overclock or volt mod etc etc.

@Rock_Appreciator 7 месяцев назад

I did this on an old dell, but just reapplied paste, added 2 small heat syncs on a couple uncooled chips, and cut vent holes into the bottom. Didn't even use a cooling fan but I saw ~12% increase in performance.

@mi-rek 9 месяцев назад

You can try 3D-printing a replacement for the back cover - a frame to attach the big fan and manage airflow. Then add many small ram coolers along the heatpipes, on gpu ram, and vrm. This turns laptop in a strong and power efficient home-computer.

@Soawano 9 месяцев назад

I believe if you drilled holes or thins on the back of the laptop it would be better since you are using the fan as intake instead of using the body as an inertia cooling.

@supernintendo9398 7 месяцев назад

I recommend looking into SBC. It can have a decient GPU/CPU, and compact. Build around the SBC and turn it into a laptop. I would recommend looking at like the lattepanda sigma, something like that. Lots of options though

@dreamworldtony 11 месяцев назад

i have a similar Dell Thunderbolt dock, had to take it apart and disconnect the fan inside of it as it was insanely loud

@fridaycaliforniaa236 4 месяца назад

11:50 For more heat transfer, you should have sanded the heatpipes and apply the putty right on the bare copper of the heatpipes. Oh, and btw, your thunderbolt module ruins the effects of your fan. Even more when you consider that 200 mm fans don't have much static pressure... 🙄

@dangavsterGAMES 11 месяцев назад

I recommend rather than using Thermal Paste that you try PTM7950 pads. After putting one on my GPD Win4's 6800U and my 1080Ti they are fantastic for keeping temps down.

@misterpotato4775 11 месяцев назад

Hey zac I think you should add some stopper in front of it like how you did on the back to prevent it from going infront. better safe than sorry

@PaulBeetge 11 месяцев назад

The docking station sits underneath the fan where it should be sucking in the air? Isn't it limiting the airflow the fan can suck in due to you limiting airflow underneath the fan?

@GreedoShot 5 месяцев назад

good thing you added that dock to pre-warm the air you're sending to your laptop

@caner2970 9 месяцев назад

I had a nerdgasm thanks bro. Started with K5 pro, even I saw throttlestop. Kudos

@guyshuvali406 10 месяцев назад

Can you manufacture a botom part with finns and change the airflow pattern of the fans to pass through it in order to turn the bottom to a huge heatsink? With cnc for aluminum or 3d printing and electroplating

@nolan6137 9 месяцев назад

I have a foam rubber ring around a high output fan that shoves air through the laptop keeping it very cool.

@TigonIII 2 месяца назад

The only modification that would make this even better would be to take inspiration from the IETS GT600 laptop cooling pad, which is to make a foam lining all around the top (where the laptop will be resting), which traps air above the fan and beneath the laptop, creating a high air pressure pocket, which will try to escape at the point of least resistance, which will be the laptops air intake. The GT600's design have proven that this lets you gain a 15-20 (some even say 30 depending on the fan speed etc.) degrees celsius reduction in heat.

@marcdraco2189 11 месяцев назад

Dude that is a work of art! Wish I had the tools.

@ZacBuilds 11 месяцев назад

Thanks man! I really appreciate it.

@marcdraco2189 11 месяцев назад

@@ZacBuilds Not at all Zac, while I envy your workshop, your skill at design and ability to create in wood just leaves me breathless. I wish you and Matt Perks (DIY Perks) could collaborate sometime, Matt's another amazing (young) designer - young compared to me that is. The things you two could cook up! Matt works across many disciplines, mostly metal and 3D parts. But anyway, I've waffled on quite enough. It's good to know not everyone in the world is an "influencer" making money just doing brainless stunts. We won't always have things this easy and your skills are transferrable no matter what.

@elfedorausado 11 месяцев назад

Good to see Matt getting some love. He has amazing ideas, as well.

@MayankJairaj 11 месяцев назад

Since I am early I'll narrate the same mod I made during the lockdown, it was dirt cheap. but first Laptop rec: I was initially thinking of recommending something like TongFang or Clevo chassis(aka CyberPowerPC, Xotic, Eluktronics, etc) but the since u already have a beefy PC, go for a Framework, they are effortless to repair and you can show us some cool mods related to these! my mod: I bought a laptop table +cooling fan combo (the one with 3 joint plastic legs on each side) de-lidded the bottom panel, replaced paste with the 14watt Cooler master stuff, and for thermal pads I used Gelid ultimate To increase the height I used Pencil Erasers and I used RasPi heatsinks on RAM and SSD The bottom panel rests in a drawer; whenever I need to take the Laptop - I clip it back on. For a hub I use whatever I have, it's called HyperDrive but also one from a brand called Orico both are good. I also used a heatsink on the HyperDrive one as it heats up due to charging. Yours looks way better than my ghetto build but it's cheap

@ZacBuilds 11 месяцев назад

I'm eagerly awaiting the launch of the Framework 16! My main problem with their current design is that there's no dGPU. I'd also like something that wasnt crazy chonky so we'll see once it's released. Sounds like an awesome project! Did you benchmark it? I'm curious to hear if it made a difference.

@MayankJairaj 11 месяцев назад

@@ZacBuilds oh so a mobile editing station is what u need.. I'd say if the laptop u use isn't cutting it then a gaming laptop would be what u need. The sheer thermal mass of the aluminium can easily power thru most of it. Something like a CyberpowerPC laptop or some OEM that sells TongFang or Clevo would be okay(Cyberpower being the cheapest) something around 2.5k USD would suffice ur needs. Brands don't matter much, you could buy the most desirable brand and it will fail. MSI, Asus, Acer, HP, Dell all fail - just buy what you feel does the stuff u need. Obviously Jarrod's the best on YT for this kinda stuff. But if portability and ease of use is also a factor then u might wanna check out the Mac's. I hate to say this but they are pretty good at what they do - efficiency. I'm sure you are aware of all their downsides, but do give it a thought. . . haven't run a real synthetic benchmark but it defo improved my gaming fps, I went from 43/46fps to a 58/60fps and the temp drop was amazing! Earlier it was 88 °C max and now I can't find a way to make it go above 72°C. And on idle it sometimes turns off the fan, this wasn't possible before, it would run its fan all the time.

@elfedorausado 11 месяцев назад

If I understand correctly, you added small heat sinks from raspberry Pi directly to components inside your laptop, and use it docked with the bottom panel of the laptop removed? I also understand that you add the panel back when you need to take the laptop with you… if so, do the added heat sinks fit with the panel on?

@mihirparekh 11 месяцев назад

Hey what power settings did U do for when it's on battery power, I have the same xps 15 and I'd like to reduce performance when on battery, thankyou

@ZacBuilds 11 месяцев назад

I used a program called Throttle Stop to limit the CPU to 20 watts

@AbeldeBetancourt 2 месяца назад

Got it! To cool my laptop I just need: * costly humongous piece of lumber * cost ineffective industrial wood cutter * costly woodwork tools * high cost Desktop PC fans * high performance thermal paste (and apply it in the wrong way) * thunderbolt port hub * wood finish * a week long woodwork project The PC industry is scamming us, maaaan!!

@hassanahmad568 11 месяцев назад

Just found out this guy . Awesome videos. Instantly subscribed.

@lrussom 5 месяцев назад

nice show, nice dude, good format, also "AND NOW, I'M SUCH A SICK WHAT?" HAHAHA nhice!

@24adrielpadilla30 11 месяцев назад

hi do you have a solution to power on a laptop without pressing the on button?

@CAceDubz 10 месяцев назад

I clicked on this video randomly but funny thing is, I was building my own laptop cooling pad. Kind of overkill tbh but it has a built in active USB Hub (but only 2.0) , QI charger, audio system, and ofc remote controlled RGB Leds, along with its 12mm fan I have placed under my laptops' cooling intake vent ofc. I also have an aluminum case in my laptop, don't know if its worth doing what you did but at the very least im replacing the thermal paste. Cheers

@user-ek1jx7lt6b 11 месяцев назад

what software do u use for 3d modelling? eager to know :)

@AmazingDX Месяц назад

Can you open the laptop without problem after this mod? Isn't K5 Pro very sticky?

@snjert8406 11 месяцев назад

Does K5 pro work that much better than stacking a few good thermal pads? Because that’s a MESS if you ever open it back up to clean the dust out and stuff

@lukazdravkovic6297 11 месяцев назад

Great work, thats truly amazing! But i have to disagree with that the laptop cooler's don't work, because in my case my laptop fan is in the middle, and it has a huge vent opening, so one 120mm fan in the cooler is pushing air in the laptop fan, and inside, additionally cooling the ram and cpu, it is able to cool it about 10°C lower than without the cooling pad.

@Nikpet3D 11 месяцев назад

Just found your channel but must say I already love it haha :D // Sweden

@asdsad17 9 месяцев назад

you can buy heatpipes online. just stack it on the existing pipes and bridge to the heatsink. can also buy those thin ssd copper heatsink. just stick it on the heatpipe for thermal mass.

@daneverdier1950 11 месяцев назад

I have an inspiron 3780 I think it is from dell and never had any problems with it. I replaced my i5 with an i7 and maxed out the ram to 32gb. It is unfortunately plastic so I can't make the back a heatsink but I did redo the paste on the dies and added some thermal pads to connect a few components to the heat pipes. Long story short, not all dell laptops are bad.

@llehsaderob 11 месяцев назад

First off it's a cool little laptop cooler, but for those of us w/o a metal chassis we may be out of luck. I wonder then if a design like the IETS GT500 Powerful Turbo-Fan cooler on amazon is the better way to go. It seems to seal the airflow around the laptop but with a smaller but high rpm (aka noisey) fan. Given the price of the cooler I may go with a diy route I'm just not sure where to source the foam or seal. Either way could be a nice update, the reviews say this cools the best but that it also has some of the worst audible levels, so bigger fan coupled with a seal hmmmm. I have a Legion5 from like 2019 or so and even with a laptop cooler the cpu and gpu fsns always run full throttle even when just running idle. Another bad design of almost all of these laptop coolers is they're usb powered which I'm sure contributes to thermals even if just slightly. I guess the work around would be to plug into the wall directly via a usb adapter and just leave the laptop's usb out of it. There is also a company that's brining a new type of laptop cooling system though it does look like it's just in the prototype phase. AirJet Pro: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YGxTnGEAx3E.html