Delta Monitor Shower Valve Cartridge Replacement

Подписаться 28 тыс.

Просмотров 158 тыс.

50% 1

In this video we do a quick run through of the Delta Monitor shower valve cartridge replacement. We discuss the steps of replacing while sharing tips, tricks and share the links below for the seats and springs as well as the cartridge replacements. The aftermarket cartridge is less than half price so I tried it simply to test and see how it works. I have used mine over a dozen times now and it works very well. I also share a link for the OEM Delta cartridge if you rather use the name brand replacement. Hope you find the information helpful and thanks for watching!
Amazon Link to Delta Genuine Monitor Cartridge Replacement RP19804
amzn.to/39dBERe
Amazon Link to Aftermarket Delta Monitor Cartridge Replacement RP19804
amzn.to/399r7pX
Amazon Link to Seat and Spring Kit for Delta Valves if needed:
amzn.to/3OasqE5
Amazon Link to Danco Silicone Grease if needed:
amzn.to/3xDNbBx
Amazon Link to Super Lube grease if needed:
amzn.to/3H7Tq4J
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
Amazon Link to replacement shift bulb if needed:
amzn.to/42PgoIk
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
TOMLOV DM201M with built in DMM if needed: amzn.to/3mnLXZz
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amt...
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low...
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/pre...
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dua...
NF Mechanic Tweezers if needed:
northridgefix.com/product/mec...
500 Port Charging Port connectors if needed:
northridgefix.com/product/500...
SMD Capacitors and Resistors Component Binders if needed:
northridgefix.com/product/cap...
Solder wire 100g 60/40 if needed:
northridgefix.com/product/bes...
NF.Mini Soldering Pen if needed:
northridgefix.com/product/por...
NF V2.3 Microscope if needed:
northridgefix.com/product/mic...
NF Microscope Articulating arm if needed:
northridgefix.com/product/nor...
NF Microscope Anti Glare Light if needed:
northridgefix.com/product/mic...
NF.Short Voltage Injection tool if needed:
northridgefix.com/product/pow...
NF Universal Board Holder if needed:
northridgefix.com/product/uni...
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hep...
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/att...
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/gri...
UNI-T UTI260B Thermal Camera if needed:
northridgefix.com/product/uni...

Опубликовано:

8 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 122

@xenoidzygote9852 Год назад

This is for anyone that runs into the kind of problems I did. Cartridge WOULD NOT come out. Finally the flange around the the ports that hold the seals & springs broke away and the stem assembly came out. Clamped onto the ports with needle nose vise grips. After much effort the port assembly came out far enough I could grab it with channel locks from the side. Never did see what was holding it. Luckily there was no significant damage to the valve body and none to the connecting plumbing, so a new cartridge solved the problem. Hopefully, I'm the only one that experiences this. Thanks to Thrifty Tool Shed for showing me what I was dealing with.

@cupcakequeen6294 21 день назад

A plumber wanted to charge me 500.00 and replace the whole valve because he said the cartridge was too old and would break off in there and it would be too hard to just replace the cartridge. I told him I’d get a second opinion…it took me 15 minutes and 80.00 bucks at the Home depot to fix it after watching this video! And no more leaks!!! Thanks and may God bless you!❤️

@markkalegaric6074

I work as a handyman and I'm always learning new things. Doing a replacement of this exact valve for a coworker. Gotta say, once I heard the southern accent, I knew I'd be walking away a smarter man. Thanks dude.

@trentstractor

"It's easy" they say. "Watch a RU-vid video" they say. Brass nut won't come off. Had a pipe wrench on it , and trying to hold the rest with Channel lock pliers. A lot of force, it but won't move. I'm calling a plumber before I break something.

@kevinyoung8186 Год назад

I tried and failed

@Dwayne1961 Год назад

Probably one of the most informative videos I have watched. Followed the video and replaced my cartridge with no problem. Thank you sir.

@judithray991

I really appreciated this video. There are many videos about how to replace the cartridge, but this is the only one that answered all of my questions as a 78-year old widow with no plumbing experience. The most important thing was putting in the cartridge and not trying to force the little triangular tabs into place, but rather hand tightening the bonnet to do the job. Shower no longer drips! Thank you!

@robertplas3947

The video is great, but unfortunately you obscured the part where you adjusted the handle to turn more counterclockwise to allow for more hot water. Maybe you could post a response or edit the audio? Otherwise, great job, especially on the repair kit, a great bonus.

@colombeaner24_7

I'm trying to get my water to run hotter but I can't tell what he's doing because his hand is in the way. What do I do to what?

@chuckbarsony3310

Many thanks for this video. I ordered a Delta replacement (NOT a knock off), and it took me about 30 minutes for the whole process. Excellent work !!

@CHAOSMOVEMENT

Thanks for the video. The job is a lot easier than it seemed at first. Thankfully this fixed my slow leak, no more mold strips in the bottom of my shower!

@TracksideNW Год назад

Thanks for posting this, especially the part number. My Delta is a late 90’s vintage and 19804 fit even though the package said 2006 or later. I only had to shut the water off for about 4 minutes. Much appreciated.

@steveparavola6858

Thank you so much! I would NEVER would have figured this out myself. This may be the most helpful RU-vid video I've seen. I did go with a knock off replacement. But, what the Heck! I can now easily install a new Delta Cartridge if the cheap one fails! Thanks again!

@Poppyseed2020 Год назад

Thanks for the tips on the springs and seals. It is very valuable. And also thanks for making the video.

@mel1daa Год назад

This video was incredibly helpful. I was convinced I had the wrong cartridge because it would not go in. Once I applied the plumbers grease and wiggled it with pressure it went in. Also, great info on the bonnet nut being hand tightened. The one I took off was tightened with a wrench. Thank you!

@SmartOutdoors 21 день назад

I have replaced 10 of these in my home over 20 plus years and on number 11 it would not slide in like the previous times. I had cleaned, lubed and still a no go. Using the brass bonnet to inch it in was the key. Thank you for this video and saving the headache.

@seanjohnson6394

Thank you, thank you, thank you. This video was a life saver. I had no idea how to fix the dripping. I had no idea these taps of cartilages. Thank you for talking about the difference between cartilages depending upon the year as well. That was huge. My show no longer drips. Thank you.

@mingli1241

Just want to say EXCELLENT video. From the 2 different types of replacement and pictures. I brought the cartridge to Home Depot and they couldn’t even really help. My cartridge broke from the handle and it came apart in 2 pieces but with vice grip I got it out but just came off in pieces. Amazing video overall. $100 in just parts and about 2-3 hours with going to the store and just taking my time as it was my first time.

@wettgilliam Год назад

Thank you for this video. This was the right cartridge replacement for my shower.

@BJordanSounds

Thank you! You are the best for this video! This was exactly what I needed, the inclusion of the diagrams and refer of the year of manufacture was perfect for me! Much appreciated!!!!