Delta Wolf Firmware Update 

There's a glitch in the User Program, I have spoken to Daystate about it and they are working on a solution, I'll let you know when I hear it's fixed

@@chrispark7504 Yes the write button is missing in Power Table tab. And if you use the dropdown menu's to write to rifle it refuses to update the Power Table tab to rifle. Having checked my Power Table, it is significantly different to the new updated configuration file for

@@chrispark7504 Yep the glitch is they wont allow you to write the Power Table to rifle.

Yes, it's definitely worth it if you want to get full access to the rifles features, it's much easier to set up your own tables on a PC and there will be more updates in the future.

Hi, the Alpha and Delta's run the same software, so as long as you have the latest update from the Daystate website that is as up to date as you can get! It's not a difficult procedure, watch a few videos and take it step by step, you should be fine.

Before you fit the performance pack study the videos, you can't be too careful with that safety drum, once you have the first safety lever on it's worth trying to pack the gap to help prevent pushing the lever towards the rifle

Hi Ken. The firmware will load onto any Delta Wolf, once the firmware is up to date it should accept the latest sub 12 configuration file (1.29), I did have a similar issue the first time on the old boot loader program, fixed it by deleting the original software on my PC and re installing the new program from the Daystate website, then updated the rifle followed by the new configuration file. Hope this solves it! daystate.com/product/delta-wolf-programming-pen-drive-and-lead/

Hi buddy , if yours is 12ftlb, what the heck is your reg doing that high ? Mine only set at 96 bar

@@studssmith2008 yes between about 90 to 105 there's not a big shift in pellet speed And possibly just trimming accuracy depending on individual pellets. I have now switched barrel back to 0.177 and now set at 100 bar All the best

I was just wandering why his is so high considering it’s sub 12

@@studssmith2008 it's about 103 bar, but it's an odd thing that the reading is different during the update process, I have mentioned it to Daystate already, it's back to the normal reading now.

Not on this model, it's a UK sub 12 ft/lb model, but in Europe the power rules are different so you can have the full tuning options

@@chrispark7504 my DW is a HP .30 cal.

It's not for everyone but it's great to have all the choices we do, variety is the spice of life!