No video :(

DEMO: How To Use a Stud Welder and Pull Out Dents FAST

Подписаться 156 тыс.

Просмотров 175 тыс.

50% 1

Get your Free New A-Z Guide To DIY Auto Body And Paint Success Manual here: learnautobodya...
Looking For Automotive Painting Tools? ⬇️⬇️⬇️ With Great Deals and Discounts
▶️ Spray Paint Gun (ATOM X Series): www.zoolaa.com/
▶️ Spray Gun Light (GUNBUDD): www.zoolaa.com...
______________________________________________________________________________
Other content:
➡️Get complete auto body and paint DOMINATION and training here: vip1.learnauto...
➡️ The R.A.D.S. Paint Formula Video Training: vip1.learnauto...
▶️ Learn How To Make Money With E-Commerce: ecomdomination...
▶️ Learn How To Flip Cars For Profits: howtobuyandsel...
▶️ Discover how to make money with crypto: cryptowaters.com
______________________________________________________________________________
More DIY Auto body Videos to Watch:
🚘 The Basics: Auto Body And Paint Your Car Yourself Without Spending $1,000s: • The Basics: Auto Body ...
🚘 Proven DIY BODYWORK Tricks - Easily Body Work & Paint Your Car at Home! Part 2: • Proven DIY BODYWORK Tr...
🚘How To Spray 2k Filler Primer and Apply Glaze Putty Before Single-Stage PAINT!: • How To Spray 2k Filler...
🚘How To SPRAY Raw Plastic, Aluminum, and Steel Car Parts (Single Stage BOSS BLACK):
• How To SPRAY Raw Plast...
______________________________________________________________________________
Social Media Links:
🔗 Connect on Facebook for More FREE Updates: / paradicegarage
🔗 Follow me on Twitter for more Project updates: / thetonyrichie
🔗 Instagram: / tonybrichie
______________________________________________________________________________
Special Training Videos and Guides On How To Build Your Wealth With Cryptocurrency:
🪙 Crypto For Beginners - How To Get Started: cryptowaters.com
🪙 Subscribe To My Crypto RU-vid Channel: / thetonyrichie

Опубликовано:

8 апр 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 148

@strongdelusion9442 2 года назад

The one thing all body men possess is patience! I have very little so my body work is usually sub par! Great video, J in Albuquerque.

@WV591 4 года назад

back in the 60s and 70s and even 80s cars had so much metal on them all we had was screw on dent puller and hooks. you drilled holes to pull dents and then slapped bondo. now they are so thin we need these spot welders.

@boobalew 7 лет назад

Thanks, Tony. Another great video, as usual!!!

@maad1087 7 лет назад

congratulations, teaching someone how to do something, is honorable, nice video.

@HowToPaintYourCar 7 лет назад

Thanks bud

@jaimev6156 7 лет назад

Nice videos Tony , I learned body work watching your videos, Im a Member also. I fixed my brother in laws Prius that had dents and scratches all over the car, The body shop wanted to charge him over 2K for the work. Good job

@HowToPaintYourCar 7 лет назад

That is awesome Jamie! Keep me posted ok!

@hyetension6595 5 лет назад

This is a great detailed video, the fact that you could repair that hood without buying a new one, shows the skills man, good shit.

@davidc9135 Год назад

Finally someone on youtube who knows how to mix filler properly!

@HowToPaintYourCar Год назад

Thank you buddy!! Get a free training and know "How To Spray Like a PRO Without Orange Peel, Dry Paint, Nasty Runs & Tiger Striping by Modeling The 5-Step R.A.D.S. Paint Formula!" www.radspaintformula.com/rads

@itsnunyabusiness4095 7 лет назад

always a fortune of good advice on this channel

@OfficialCarlosGarciaAceves 5 лет назад

Quality time with GODFATHER Good work!

@David-sw3on 3 месяца назад

What a Great Learning Video! Good Job 👍😉🇨🇦

@HowToPaintYourCar 2 месяца назад

Thank you 🤗 Check out our LABAP VIP Program, know how to paint like a PRO and get your free manual at learnautobodyandpaint.com

@alec4672 6 лет назад

Shout out to the Marine Corps sticker in the back glass!

@micke2943 7 лет назад

This is the best way to pull out dents! ive tried with glue gun and tabs, and even welded on M5 screws on a volvo rear quarter that had been banged up! (Dont got this machine that you have!) Got my dents out! ;)

@HowToPaintYourCar 7 лет назад

cool

@heinricheugenvonhelmbrecht6905 5 лет назад

Excellent demonstration! Thank you!

@HowToPaintYourCar 5 лет назад

Thanks Eugen! Don't forget to grab your free manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual

@donaldbaker6961 3 года назад

I love your videos man Awsome I think your a good teacher it is cool how you were teaching your god father and you stayed patient thank you For the lessons 👍

@adventures223 2 года назад

Great work Tony you explain it very well in a nice calm tone voice you are a master body man love the vids so beautiful there in Hawaii always wanted to vacation there or live there is it hard to start a business in Hawaii keep up with the great videos thank you

@adventures223 2 года назад

Cool tool i have one and i am going to use it tommorow the only con is the studs are very expensive

@fidelcordova9374 5 лет назад

You’re a great teacher man . Great info output I painted my racing boat my daughters atv and a few more things .. thanks to you I’m still learning new things can you tell me more about the grinding you do what kind of wheels do you use .?

@HowToPaintYourCar 5 лет назад

Fidel Cordova thanks :) need to head on over to the site download the free autobody manual that I give away. Then you need to check out VIP we have over 100 hours of step by step info in there for you!

@mattthomas1369 4 года назад

Great video I’m trying to learn more and you explained things really well thanks!

@HowToPaintYourCar 4 года назад

Matt's Model: Check out VIP and see how it can help you more with your car projects! www.learnautobodyandpaint.com/vip-offer/

@jeffnunley1861 2 года назад

Where can I get a slide hammer locked that

@danielb2145 5 лет назад

That machine is excellent, the less filler the better.

@hermannnicholsson132 7 лет назад

oh man.... you're such a blessing... thanks Bro.

@HowToPaintYourCar 7 лет назад

Glad you like it!

@jeffnunley1861 2 года назад

Where can I get a slot hammer like that

@drugsguys914 5 лет назад

Dent on aluminium body more hard then standard metal..good job bro..

@35TheDarkknight 2 года назад

Nice

@Corolla_Beau 2 года назад

Hey howzit How do you choose location of where to weld pins?? Are you going on the line or at the lowest point of dent?

@smithfoxe 8 дней назад

I’m here to find this out as well.

@Corolla_Beau 8 дней назад

@@smithfoxe I figured that you do it reverse, as if you were watching a video of a dent made in rewind, you do have to hammer it still but that’s what I got with doing a few major dents. If you just weld/pull from the deepest point it won’t come all the way out and create mini dents/warps so best bet is to start some places in medium depth of the dent and then on the deepest points l, and then to clean up pull the body lines last. Best I can describe it with what I’ve done so far, but as usual, no help no responses, so I’m sure there are better techniques but get it done however you can I suppose, every dent is different there’s no one way to do all.🤙🏼

@dorianfulton7168 2 года назад

Nice video!

@MrBeachwaves 6 месяцев назад

How much time between coats?

@skinnyb8888 2 года назад

Very informative! Thank you. Hint I use the old 1800s irons that were he heated to iron clothes. I find at flea markets. Would work great for your backing.

@andrewerickson6690 10 месяцев назад

Great idea thanks

@KyCellRepair 8 месяцев назад

I’m using the same gun but the studs keep pulling through the metal creating a small hole. It’s obviously thin metal. I’m worried a mig welder will burn a bigger hole now.

@MelvinWare 10 дней назад

Do you need to to disconnect car battery before using or will it effect anything?

@HowToPaintYourCar 9 дней назад

Hey Man! By disconnecting the battery before using a stud welder, you reduce the risk of damaging the vehicle's electronics and ensure a safer working environment. Know more tips and tricks and check out our VIP Program at vip.learnautobodyandpaint.com/home

@danoldsbb4558 3 года назад

good work

@olsonspeed 5 лет назад

Great video, I have a rear quarter panel to repair on my truck, I will be now buying a stud welder.

@HowToPaintYourCar 5 лет назад

Awesome man!

@richardweyland116 Год назад

Just my opinion- I would spread the Bondo at least six inches beyond the damage so it will blend easily.

@MasterchefPainter 7 лет назад

shoul i remove the battery before using that tool or not?

@theflyingdutchman787 3 года назад

Using the stud welder won’t affect the electrical system whatsoever. The current is localized to its working area

@davidd727 9 месяцев назад

Would it be possible for me to send you a couple pics of a dented quarter panel and you let me know if it would be possible to pull out with the weld studs?

@HowToPaintYourCar 9 месяцев назад

Hey Man! Are you a LABAP VIP member? Check out our blog about Dent Repair Demo Using Grinder and Stud Welder Gun www.learnautobodyandpaint.com/live-dent-repair-demo-using-grinder-stud-welder-gun-plus-qa/ and you may also send an email at ninjasupport@learnautobodyandpaint.com

@MrZiggy1979 3 года назад

How do you stop the weld pins from snaping off the car when dent pulling

@gregbernard4466 7 лет назад

Do you have to grind off all the galvanization (aka zinc coating) on the sheet metal before using the stud welder?

@devoywilliams5549 6 лет назад

yea you can only weld to bare metal

@pighater951 7 лет назад

Wack it back I've learned something today😂😂😂👌✌

@stephenr1999 5 лет назад

Buy parts? This is free. Anyway remember also that this is rear quarter on an old-er dodge truck. You pull that hard on some panels or doors and it gives a lot easier.

@Repairje 7 лет назад

good

@KUBBI7488 4 года назад

is there many different colors of hardener ???

@hectorcalderon3011 3 года назад

What gun are you using because I've had bad luck they don't seem to last long

@HowToPaintYourCar 3 года назад

Check out Zoolaa.com I use the ATOM X27 a lot. It’s a great spray gun!

@hectorcalderon3011 3 года назад

@@HowToPaintYourCar sorry I meant the stud gun

@Awsometurtle20 4 года назад

So i was using a slide hammer that has a tip that welds on and some guys in a facebook group said to put pressure and to tap the crown instead of ligthly tapping with the slide hammer. Can i send you the video so you can see?

@gergemall 3 года назад

My stud welder has a smaller can wheel in the slide hammer

@boostdeep3967 3 года назад

Does it work on aluminum

@Limeayy 7 лет назад

I don't know because i feel like this is supposed to be something your god father should be teaching you but its wonderful when you're the one teaching a older person though :D

@alrhon50 Месяц назад

Can I purchase nails as required from somewhere

@HowToPaintYourCar Месяц назад

You can purchase it on Ebay, amazon or nearest auto body shops stores near you Man. Grab our VIP Program trial and get Free gunbudd(will pay for the gunbudd you shoulder the shipping) you will get access to our auto body and paint course vip.learnautobodyandpaint.com/free-gb-offer-a?fbclid=IwZXh0bgNhZW0CMTAAAR38aOV3OmSW6xcSXN7jq55QYp4t617-UnXvCRHtnuVJUiAlLMVrqhCd1V4_aem_GQphCjwl_n7fDF3I2IrNzw

@haidinh5598 7 лет назад

Is it better to use the 3mm or 2mm studs?

@alexhaynes7483 7 лет назад

Great video. Just picked up my stud gun during a HF Tent sale. I have a crease in my rear truck fender, so this is good stuff. Is it not easy to hammer from behind, inside the wheel well, or is this just easier?

@HowToPaintYourCar 7 лет назад

It was a dual wall, so from inside would just damage the other wall... :)

@kureshikinza3666 5 лет назад

bogus work not propper safe dear... try wurth air clutch puller... and do spot weld clipping then pull it...I think this is a good once afterall

@itsnunyabusiness4095 7 лет назад

they make a attachment to stud weld for migs too

@horaciomartinez2915 6 лет назад

Hey Boss, everything looks good but you definitely have to prime that surface before putting bondo down, or its gonna rot from underneath

@KUBBI7488 4 года назад

great video ! i wish someone can train me like that !

@HowToPaintYourCar 4 года назад

We have a VIP course that you might want to check out man. vip.learnautobodyandpaint.com/exclusivevip

@mustafaar7899 6 лет назад

Can i use stud welding instead of oxy actelene when metal shrink and became like can

@biggdogg305 7 лет назад

how much would you charge me to paint my 72 riviera root beer pearl? you could use it for one of your videos too

@dannymartinez8314 3 года назад

Can the studs be reused?

@centralogz756 7 лет назад

thanks for your time to show us how to get that dent out also how to use bondo can wait for the next part . keep up the good work hope one day I will be able to be good as you i see you are quick and neat 👍👍👍👍....O.G 😎 1042

@HowToPaintYourCar 7 лет назад

No problem thank you more for the support :)

@danielb2145 5 лет назад

I like to spray the bare metal panel first with Primer, so it's sealed, I find the body filler sometimes lifts and starts to rust between filler and metal, I Primer first then put filler on Primer, then sand the Primer again then final paint. Etchit primer, I hate rust.

@gerardosoto1325 3 года назад

You must be doing something wrong with your body filler because it is actually recommended that you use body filler on metal only, but puddy can go on primer as long as the surface is scuffed

@roberteubank8240 6 лет назад

Do you spray any epoxy primer or treatment on the metal before you fill it?

@horaciomartinez2915 6 лет назад

Definitely should or else its gonna rot under the bondo

@danigarcia1788 6 лет назад

Question... can I weld two metal shade, one tap over the other with it. Like a spot welders? Thanks

@HowToPaintYourCar 6 лет назад

I am not sure what you are asking.

@abdurrahmansyah2605 3 года назад

greeting from me, You R a good lecturer, waaw

@HowToPaintYourCar 3 года назад

Wow, thank you

@hunterdeel7481 6 лет назад

So my brother was backing a trailer up and Jack knifed it and crushed the corner of my bed under the taillight... It's really bad. My question is do I have to get a replacement panel or count I pull in and bomdo it?

@bobblack3870 6 лет назад

Corner of the bed or the fender below the light? Or both? If you crushed the corner of a cardboard box, could you straighten it? The answer is not likely. You must "reverse" the damage in the same way it occurred. When you have multiple pieces of sheet metal coming together, repair may require professionals. Otherwise shop around for a complete back end or panel (as required). Bondo should never be more than 1/4" thick if you want it to last.

@realnewsthatmatters9319 4 года назад

I think I would've replaced that hood with a cheap one from the junkyard with no damage.

@HowToPaintYourCar 4 года назад

to each his own brother!

@lovetofishneosheo1829 4 года назад

I never could get my stud welder to work on the Chevy corvettes. They just wouldn't stick for some reason

@jakerene3762 4 года назад

I could never get to bare metal on mine either 😂🤣

@wyattalvarez6327 7 лет назад

Hello i want to paint my car and the paint on it is in good shape, no dents or deep scratches and i was wondering how much i would need to sand it before painting? Would i only need to sand away the clear on the existing paint? Would i need to primer it as well? I was planning on using a single stage acrylic urethane. Any feedback would be great thank you.

@rockdawg1467 7 лет назад

you have to sand the clear coat down to paint and then make sure to properly mask the car and clean the paint and all jams and seal the old paint to avoid the chemicals reacting with one another and dry and prime and sand primer with 600-800 check for any inperfections and clean again blow any dust of car or truck and you can repaint with the single stage just make sure your using proper temp reducer good luck

@wyattalvarez6327 7 лет назад

thank you!

@rockdawg1467 7 лет назад

Your welcome

@michaelfrancis3261 6 лет назад

Wow that's a lot of body filler

@ronniebuicks5569 7 лет назад

Why do you hammer when he pulls with the puller? I would like to know what's the theory behind it?

@hardkore360 7 лет назад

Ronald Almendarez it stiffens the metal so its not left flexible

@ronniebuicks5569 7 лет назад

hardkore360 they thanks man, have a blessed Sunday.

@bobblack3870 6 лет назад

If it could be done perfectly, you want the hammer to hit at the same time the slide hits. That is why he is trying to hammer very frequently. It is just by chance that with 5 slides, the hammer might be synchronized with the hammer a couple of times - that's when progress is made. It's all about setting up the desired shape.

@josesaldana884 4 года назад

Where you buy your stud welder gun?

@HowToPaintYourCar 4 года назад

Bought it a while back.. try Amazon

@wijoys9217 7 лет назад

is that aluminum panel?

@HowToPaintYourCar 7 лет назад

No, steel.

@Adamdub612 4 года назад

i need to do this to my dads 2011 dts that some punks ran into and i wanna suprise him and have door done in the next few wks

@HowToPaintYourCar 4 года назад

Adam, check out VIP and see how it can help you with your dad's car! www.learnautobodyandpaint.com/vip-offer/ Best of luck!

@victorsandoval3690 7 лет назад

How did it turn out?

@HowToPaintYourCar 7 лет назад

SWEET!

@HowToPaintYourCar 7 лет назад

Yes sir!

@d2an3i 5 лет назад

how much you used body filler on that hood you could of purchased one from junkyard

@jesusalvarez5563 6 лет назад

What are you building there? Need another gallon? Holy crap

@itsnunyabusiness4095 7 лет назад

hi tony

@Nicotrok 7 лет назад

You look too much like Kirk Hammett in the 90's

@HowToPaintYourCar 7 лет назад

I just need some long hair! lol.

@MrFreeze79 6 лет назад

cool, i paid for the autobody course but i see all the same videos are on youtube! lol

@HowToFlipCars 6 лет назад

ThisISETHANBRADBERRY! It’s not the same at all! Lol when did you join my friend? Did you register for the new membership site? Something is wrong. Contact support and tell them you want access to the new membership site!! Keep me posted buddy

@MrFreeze79 6 лет назад

heyyyyy tony@!!!! i just joined maybe a few weeks ago to VIP. so far liking the site, lots of good learning. I just have to say, you have matured, but damn dude you don't age at all wth is up with that! stay young man, thanks!

@rajivsewnandan4865 7 лет назад

some heat would be good

@drummer_zay9493 5 лет назад

Good stuff, but hopefully your bondo spreading has improved..

@OfficialCarlosGarciaAceves 5 лет назад

It's the end result right!

@jhenson5168 Год назад

5:15, a couple dollys would help you a bunch man..

@HowToPaintYourCar Год назад

It was dual layer couldn’t get to it from the back.

@jhenson5168 Год назад

@@HowToPaintYourCar yeah you can. I’m doing now on a f350. Just need the right dolly

@bishopnairn646 3 года назад

Good work, but I’d much rather have my car fixed with sheet metal and a wire feed

@gerardosoto1325 3 года назад

Damn what they fixing? Rust? This is the way to pull dent besides using hammer and dolly don't know what kinda repairs you need lol

@slackerzsincity6947 7 лет назад

That shit is mangled.

@ngstahl 7 лет назад

Just watching a couple guys that have no clue what they are doing.

@ultrainstinct8061 7 лет назад

ngstahl and of course you do.

@adilmchichou5710 5 лет назад

That s not a proper repair first of all you don't grind off medal you cAn use a plastic roll out for that second using stud gun you pull from outside going to the deep spot and you don't hit the slide hammer back so you won't create a high spot points you u just pull one good pull and keep ur hand tight and help hitting the regular hammer around it

@jasonlawrence3098 4 года назад

Wouldn't be pulling the studs out if you knew how to use an actual slide hammer properly.

@HowToPaintYourCar 4 года назад

Why don’t you make a video upload it and show us…

@Wingsnthings23 7 лет назад

Go to the junk yard and buy a hood, Jesus

@HowToPaintYourCar 7 лет назад

Nah..

@alec4672 6 лет назад

Why not just do the hood while doing everything else

@swiftWord 6 лет назад

Hell yeah...I got one straight as an arrow from LKQ for $69

@jeepmoab1 6 лет назад

This way is a lot more fun and satisfying....anyone can go buy a new one.

@Just-a-girl 6 лет назад

Hmm, not a hood.

@TNT5021 6 лет назад

i do not like peper pay

@ForSaKeN0TeARS 7 лет назад

I once repaired something like this with just filler. There was like over 2 pounds of filler on it lmao. I did end up looking very good though, guy who bought it didn't even spot it.

@bobblack3870 6 лет назад

I feel sorry for your buyer. With time he will know what you have done - his vehicle will tell him, plus you deceived him - because it sounds like you did not tell him. Not funny.