Designing and Building a Sailing Canoe - Part 1

Подписаться 1,6 тыс.

Просмотров 27 тыс.

50% 1

I wanted a portable sailing dinghy that would be quick to rig, car toppable, and would double as a kayak (in fact a double kayak). This is the first video in the series where I document the build.
The boat was designed for the choppy conditions on Port Phillip bay, and is a hybrid of the Sabre and the Viola sailing canoe (by Michael Storer), but is built in the style of the Huntington Harbour Kayak (by Spira boats). I also took some advice from the helpful experts at The Wooden Boat Forum.
Music:
Beautiful Piano by LesFM | lesfm.net/pian...
Music promoted by www.chosic.com...
Creative Commons CC BY 3.0
creativecommon...

Опубликовано:

21 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@rudywoodcraft9553 11 месяцев назад

Hi Lee on a whim I watched my old video about designing and building my sailing kayak Nomad and realized I hadn't checked out your video from your comment. Very similar indeed! Well done!

@fredjensen1683 2 месяца назад

what thickness plywood, was it marine grade?

@leemelbourne3297 2 месяца назад

4mm. Yes, marine grade.

@julianowelter3178 2 месяца назад

opa consegue me passar as medidas tenho interesse em fazer um assim pra mim

@leemelbourne3297 2 месяца назад

As you can see at 1:30 the lengths were all worked out by just testing. The width I determined from a kayak I have, and is about 70 cm at the waterline and I think about 85 at the gunwales. I tested to make sure I could still paddle given the width. I need to make another video, as i have modified it substantially since then. I am building some outriggers as I sail on a bay that gets quite choppy. The narrow width is not suitable for sailing in large waves.