DETAILED Installation of Corsa Dodge Charger Long Tube Headers & Connection Pipes.

Подписаться 33 тыс.

Просмотров 67 тыс.

50% 1

Unboxing & detailed installation of the Corsa Performance Dodge Charger Long Tube Headers & Catless Connection Mid Pipes. Steve & Pete do a detailed installation tutorial from start to finish. Thanks for watching!
Related Dodge Charger Videos:
1. Stock Exhaust Manifold Removal: • The COMPLETE removal o...
2. Corsa Long-Tube Header Install: • DETAILED Installation ...
3. Corsa Extreme Cat Back System Install: • INSTALL & COMPREHENSIV...
Get your subscriber Corsa Performance discount information here: allbeastprojec...
Products, parts discussed or installed:
1. Corsa Long Tube Headers/Collector Pipes: tinyurl.com/y7...
2. Corsa Long Tube Headers (Only): tinyurl.com/yb...
Special thanks to Andy & Pete of Chester County Transmissions. Visit CCT online, www.chestercou... or call 610-384-2879.
HELP SUPPORT THE CHANNEL (READ BELOW):
Visit my website, allbeastproject... for our official merch, partners, special subscriber discounts & more!
Purchase AMSOIL products from BEAST Synthetics. Visit my AMSOIL Dealer website: beastsynthetics... (My AMSOIL Dealer #5746939)
*SAVE $$$ Become an AMSOIL Preferred Customer: www.amsoil.com...
*MAKE $$$ Become an AMSOIL Dealer: www.amsoil.com...
Need anything on Amazon? Please use my affiliate link: amzn.to/2zt5hcf
Send us stuff (if you like) & we’ll feature it in a future video.
BEAST Projects (Steve or Heddy)
PO Box 41
Wagontown, PA 19376
STAY CONNECTED! Follow us on:
Instagram: / beastprojects
Facebook: / allbeastprojects
Twitter: / beastprojects
THANK YOU FOR YOUR SUPPORT!
My favorite tools, shop accessories & vlogging gear (Affiliate Links):
1. GRYPMAT Flexible Non-Slip Tool Mats: bit.ly/34jQHlm
2. GoPro Hero 8 amzn.to/30EvXVs
3. DJI Mavic Pro Fly More Package amzn.to/2BUSBtt
4. Canon M50 Camera amzn.to/2BZqv4Q
5. Rode VideoMic: amzn.to/2pdBLo8
6. Rode VideoMicro: amzn.to/2M2jB1K
⚠ DISCLAIMER: BEAST Projects tutorial, instruction & how-to videos are intended solely for entertainment and/or informational purposes & for use by persons having appropriate technical skill, at their own discretion. BEAST Projects is not responsible or liable for any loss or damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information in this video. This video description contains affiliate links.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 131

@steady5.07 4 года назад

this video will blow up in the next 5 years

@BEASTProjects 4 года назад

I wish it out now! lol

@JLCoast 4 года назад

I’m definitely getting this set up ,when I start performance mods. Was always going with corsa but you just set it in stone for me ,thanks.

@brusewayne2032 2 года назад

Watched your video and knocked mine out in 4 hours. Thanks.

@BEASTProjects 2 года назад

Glad it helped! Thanks for watching.

@trashdiligence5284 3 года назад

This seemed so much easier then on the Durango SRT, lol took us 3 days. We are currently running Kooks headers and we think they might be leaking but not sure yet. We are getting misfires only on a cold start and getting P0300 codes and it's been bothering us for so long so wish us luck this weekend! Great video man and love that charger 👍

@marcosmoreno7490 2 года назад

I know this is old but did you use the supplied kooks gaskets or the OEM mopar

@trashdiligence5284 2 года назад

@@marcosmoreno7490 We used the supplied gaskets. When we took the headers off we found out the gaskets were leaking, we're pretty certain that the gasket was the problem.

@marcosmoreno7490 2 года назад

@@trashdiligence5284 ok my boss at the shop I work at has been thru the problem or something cause when we ordered my headers he ordered me mopar OEM gaskets too I think I’m putting them on this weekend

@trashdiligence5284 2 года назад

@@marcosmoreno7490 Yeah I would say the OEM gaskets are going to be your best option. People say the supplied ones are just as good which is why we opted to put them on but after that I don't think we're even going to mess around with after market gaskets again lol. Did you get Kooks headers as well?

@marcosmoreno7490 2 года назад

@@trashdiligence5284 yes sir, Kooks 1 7/8 I believe with catless mids, going to cut out the rear resonators/mufflers (already deleted mid muffler) also going to do a active exhaust delete cause I constantly hear it squeak open and close when driving slow and put some black powder coated dual square angled tips

@adamfillion 3 года назад

You are the man! Life saver. Just finished my removal today with the help of your last video. And I will do the install another day.

@BEASTProjects 3 года назад

Glad I could help! Thanks for watching!!

@TheSadler333 4 года назад

Pete is a beast. That’s a real deal install. Great video.

@acctahmed7055 4 года назад

Finally I was waiting for this review for a long time, thank you for sharing.

@BEASTProjects 4 года назад

Thank you for watching!

@AntonioClaudioMichael 4 года назад

Great work corsa is one of the best I also love Borla exhaust

@marcosmoreno7490 2 года назад

I got my stock manifolds out thanks to the other video now to study this video for the tips lol

@AverageJoe84 6 месяцев назад

If i could find a shop around me that would take their time and install these with this kind of TLC id be all over it.

@deadthybug4646 Год назад

Great video, very helpful, loved the commentary as well

@jameslong9564 2 года назад

It’s hard finding anyone to install shorty header aside from a dealership.

@StlouisCory 4 года назад

Can't wait for the startup!

@marquetteblango5621 4 года назад

Hey just wondering what the startup sounded like. I recently purchased the Corsa LTs to go along with the Corsa Extreme and Catless Mids

@BEASTProjects 4 года назад

Stay tuned for Friday’s video. 😊

@9891Daniels 2 года назад

Every shop I find to put a gaskets and locking header bolts on my already installed long tube headers say that they have to pull the engine and quote me a arm and a leg

@greg6180 2 года назад

Great job!! Thank you. Soooo how many o2 extensions are required. Both front and back?

@kevinrodriguez1216 4 года назад

Can someone explain to me how dynos work? Like wheel horsepower and a car makes *** to the crank..? I’m a little confused and I’m sorry I don’t know much about cars

@BEASTProjects 4 года назад

Dynos measures force, torque or power & they are designed to create a load to duplicate various speed (RPM) and torque requirements. Based on this data, horse power can be calculated. This in turn provides a snapshot of the engine performance for comparison to the manufacturer’s specifications.

@brandonjohnson1070 3 года назад

Where did you get your tune from and how can I get the same one? Because I plan on getting corsa long tube headers as well with catless mids and I would like to have everything ready like the tune and stuff. Also just about how much was the tune?

@BEASTProjects 3 года назад

Check out my playlist: ru-vid.com/group/PLGMOElExUdjrhN27y-OYfO05qH7o6KV-n

@crazyjoker392 Год назад

Does it hang past the oil pan that's why I'm kinda skeptical of long tube haven't seen any videos abt that question yet

@Regii_HVAC 2 года назад

Hey Steve, just wondering if you can put these Corsa long tubes with a lowered charger scat. I have the corsa extreme exhaust and H&R lowering springs. Just wondering if I have enough clearance for the long tube headers?

@JohnAdams513 Год назад

How do I get the service airbag warning light to go out?

@chetlangford2144 3 месяца назад

What size are they

@mikemontgomery4378 4 года назад

great video....great product....great look.....you know it's gonna sound great.....lol

@dc5131 3 года назад

Man after all that - no sound test !? Good vid though - keep up the good work

@dominiccunningham8245 5 месяцев назад

Can you run the mid pipes without the headers ?)

@MARCELO20955 Год назад

What size bolts are those ? To go onto the clamps ?

@AntonioClaudioMichael 4 года назад

Sweet video very informative 👌

@KennyLauderdale 4 года назад

I gotta do mine but... I don't feel like it lol... It'll take a WHOLE DAY

@BEASTProjects 4 года назад

It will! Haha

@robertdenton7889 2 года назад

Hey man. Question. I picked up a srt 392. I am getting a corsa extreme cat back exhaust. But I have looked everywhere for these catless mid pipes. I can’t find them anywhere. Did they discontinue.

@gdelacerda4117 3 месяца назад

Yea they did. A couple years ago. I’ve been trying to find some but haven’t had luck

@G59.Bambee 3 месяца назад

@@gdelacerda4117 cornerstone performance

@abe2great128 2 года назад

Is the exhaust still stock for the most part or is it all corsa

@bobbybeanz8990 Год назад

Would lifting the engine make it easier?

@chapowiththesticks 3 года назад

Did you keep both of the braces?

@Michaeljordan147 3 года назад

Great video

@glleboy2233 4 года назад

So this setup has no cats right ? So would you say it has catless mids ? Because online corsa says the long tuner headers are connected to the catless pipes.

@BEASTProjects 4 года назад

Yes, the info is in the video description...

@steve7837 3 года назад

I might've missed if you said it in the video, how much did they charge for install? They're close by to me

@BEASTProjects 3 года назад

Hit up Andy at CCT for a quote. www.chestercountytransmissions.com

@glockmodder 4 года назад

Do you really need the rear o2 sensors? It should not trip the cel if they are tuned out right?

@BEASTProjects 4 года назад

Not sure... Would make sense that you wouldn't need them if they're tuned out though.

@capo5582 2 года назад

At 16:48 do you have a link to that 4 bolt flange?

@RS3_WAY 3 года назад

Anyone know what size is the header boots mount on engine needed for installs ??

@BEASTProjects 3 года назад

Corsa's kit comes with new header bolts.

@Migoamaya Год назад

Are these 1 7/8 or 1 3/4?

@christhompson9511 3 года назад

Did you get any check engine lights after the install because I want to put mine on in the next few days but can’t get a tune until mid July

@BEASTProjects 3 года назад

I had tuning....

@christhompson9511 3 года назад

@@BEASTProjects ok gotcha so I’ll probably get a light so I think I’ll just wait

@luckyboy8798 3 года назад

Sir gotta question I have a cat back corsa extreme I want To put some long tube Corsa headers . Do i just need Corsa headers no extra pipes.

@bossstrick 3 года назад

I’m pretty sure you’ll need the mid pipes also , I think he bought a kit that includes both LTH and mid pipes .

@bossstrick 3 года назад

I don’t think he answers any questions on the charger anymore since he got rid of it. I miss the charger vids they were very informative.

@curtisjonesiii1600 3 года назад

Do you think this will fit in a v6? 2018 Dodge charger sxt

@BEASTProjects 3 года назад

@anthonysourdiff1835 4 года назад

I hope there's big horsepower gain for all that work.

@BEASTProjects 4 года назад

Me too! Haha

@colonfo 4 года назад

Is the car lowered? Was thinking of going LT but I'm worried I'll be too low with lowering springs.

@BEASTProjects 4 года назад

It’s bagged...

@carlosanti3628 3 года назад

Honestly the headers won't bother you unless you love speeding over speed bumps.. I have Kooks Long tube headers and dropped my Challenger Scat pack wit the Eibach "Prokit " which PERFECTLY leveled the car to where Dodge should have had these cars leveled from the factory ..0 issues (it been 3 years since ), yes the headers come down and out towards the rear of the car but I rarely scrape anything so it not what you think..This isnt my you tube account im at the job but I can show you picutres on my face book Carlo Santi..Looks sick..highly recommend it+ way better handling ..

@pianoguy4949 3 года назад

I’ve got a 2012 Dodge Charger RT and i want the first bolt on to be bbk long tubes. Does anyone know if i’ll need a tune for just the headers? I wanted to get fbo before i got a performance tune

@chachiluv4085 3 года назад

It's best to get them tuned I'm getting along two headers added on my vehicle this month going to holler at my muffler dude 2 day

@marquinnparker5397 3 года назад

Where did you get your tuning done because my check engine light came on a day after they were installed

@BEASTProjects 3 года назад

DiabloSport or Hemifever can get you all set up.

@adorno1010 3 года назад

you just need a 02 sensor spacer if you dont want to spend hundreds on a tune or dont plan on future mods, other wise yes you will need a custom tune

@jashararthur6639 2 года назад

Does this pass inspection?

@marquinnparker5397 3 года назад

Will this setup work with the 6.2L hellcat Charger?

@BEASTProjects 3 года назад

They have a kit for the 6.2 Hemi.

@h2oram903 4 года назад

Will you guys have the Gueston and Bell at the Chrysler Nationals?

@BEASTProjects 4 года назад

We might swing by one of the days w/ Gaston.

@h2oram903 4 года назад

That would be awesome. I'm a local guy I see your vehicles around all the time. We actually sort of raced down 82 the one time.

@PawlDunken 3 года назад

Those are nice

@luluinyohoe Год назад

so i shouldn’t put this on if i daily the car ?😂

@yoursoldier72 2 года назад

Where’s the removal video ?

@marquinnparker5397 3 года назад

Did you buy the o2 sensors separate?

@BEASTProjects 3 года назад

Nope, used the stock ones.

@Bladexruless 4 года назад

Just past you in the jeep lol

@BEASTProjects 4 года назад

We just picked up crabs from Hill Top.

@mrbam9418 3 года назад

Did you have to delete the converter? I didn’t see

@BEASTProjects 3 года назад

Removed them

@aaronferguson47 3 года назад

@@BEASTProjects this kit comes with converters?

@BEASTProjects 3 года назад

@blkedout_3928 3 года назад

What’s that tool called that he used to spread the xpipe ?

@BEASTProjects 3 года назад

Expander Kit, amzn.to/3r5k2tt

@blkedout_3928 3 года назад

@@BEASTProjects thanks you sir ,another question I’m not getting a tune when I install these yet can I use to the o2 sensor adapters to not get a cel ?

@BEASTProjects 3 года назад

No guarantee that it won’t throw a CEL w/o tuning for off-road use.

@blkedout_3928 3 года назад

@@BEASTProjects question buddy I installed my headers but for some reason now there’s a leak on both do u think I need to retighten the bolts again I put lock tight on them before going in as well

@antoniocapilupi1225 3 года назад

How does it work with active exhaust

@BEASTProjects 3 года назад

Just fine

@antoniocapilupi1225 3 года назад

@@BEASTProjects so how does it work, is it eliminated or stays in place

@BEASTProjects 3 года назад

The valves stay in place.

@BEASTProjects 3 года назад

The exhaust valves are incorporated in the Corsa Systems. It’s shown & explained in a prior video.

@antoniocapilupi1225 3 года назад

@@BEASTProjects I had clicked on this video first, I’ll check the other vids to see the install, thanks

@tyrio6377 4 года назад

Are you going to dyno it again?

@BEASTProjects 4 года назад

If my schedule ever frees up... I'm dying to get back to Maple Grove Automotive, LLC

@m.sanchez550h 2 года назад

Is there any way to get these still ?

@BEASTProjects 2 года назад

Maybe, if you can find a company that has old inventory.

@m.sanchez550h 2 года назад

@@BEASTProjects thanks my guy I have the exact same charger with the exact same color and exhaust I wanted to get the long tube headers to enhance the corsa extreme !!

@BEASTProjects 2 года назад

Check my website for the discount code.

@mikestrucks 4 года назад

First hey guys !!

@blkedout_3928 3 года назад

Did you get any check engine light ?

@BEASTProjects 3 года назад

Nope, I have tuning

@blkedout_3928 3 года назад

@@BEASTProjects what happen if we don’t get a tune

@BEASTProjects 3 года назад

You might get a check engine light

@adorno1010 3 года назад

@@blkedout_3928 if you get a spacer fir the secondary sensors you will not get a check engine light

@blkedout_3928 3 года назад

@@adorno1010 bet bro thanks 💯

@4ngels693 4 года назад

start up Video?

@BEASTProjects 4 года назад

Full blown review & comparison video coming this Friday at 6pm.

@Midnightmenac3 2 года назад

1,300 or 13k

@KennyLauderdale 4 года назад

I need a tool list

@BEASTProjects 4 года назад

LOL

@ROADWARRIOR21 4 года назад

Big Job but it look nice and I know it going to sound Bad A$$

@jeffh6971 4 года назад

Again with the teaser! Ugh

@BEASTProjects 4 года назад

This Friday is the review.

@glleboy2233 4 года назад

So this setup has no cats right ? So would you say it has catless mids ? Because online corsa says the long tuner headers are connected to the catless pipes.

@BEASTProjects 4 года назад

Correct, cat-less mid collector pipes.