Developing a Sense of Feel With Micrometers

Подписаться 29 тыс.

Просмотров 2,4 тыс.

50% 1

This is a response to a viewer question on my video, How to Read Micrometers, asking how much torque should be used on the thimble of the micrometer. This takes a certain feel for the tool that only develops with practice and this video shows some different ways to practice until it's second nature.
If you like my videos, please consider supporting my channel on Patreon. You'll get early access to videos, occasional exclusive content, and I'll give you a shout out in my videos.
/ stuartdeharo
Follow me on Instagram at / stuartdeharo

Опубликовано:

3 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@joelspann9917 11 месяцев назад

thanks . last week was the first time in over year i went to my shop and started back doing machine work. i had a mild stroke over a year ago and then ,reconstructive foot sugery and a hip replacement. i still have some glitches from the stroke. making parts is the best meds there are. thank you so much for your show .you are truly a master of the craft

@StuartdeHaro 11 месяцев назад

I'm glad you're back at it and feeling better. Take care!

@angelramos-2005 11 месяцев назад

Very good video,Stuart.Thank you.

@joell439 10 месяцев назад

Fabulous training video - thank you 👍👍😎👍👍

@bimatube1274 3 месяца назад

I just bought a used one Ammco 2250 and the ratchet doesn’t make a click noise, it has a spring in there. I’m learning so I can repair my brake rotors. I think this sense of feel is personal and we never will have a perfect measure with these designs. Thanks for sharing your knowledge.

@StuartdeHaro 3 месяца назад

Yep. That’s the friction thimble. I personally really like those. There's just a satisfying smoothness when it slips.

@ashwanikumar2040 11 месяцев назад

Thanks for this informative video. Kindly post the link for Vernier caliper and Dial gauge.

@kevinbest9698 Месяц назад

Thanks for the existential crisis after I had to slow the video down to .25 to see what you’d put in the caption

@StuartdeHaro Месяц назад

Now I have to rewatch it to see what I wrote. Edit: Yeah, sorry about that. That got a little dark. But hey, thanks for watching!

@aceroadholder2185 11 месяцев назад

If using a standard dowel pin as a standard be aware that those pins are usually +0.0001" / +0.0002" over nominal. Pins are made this way so they will be a light drive fit into a hole that has been drilled and reamed to the nominal diameter.

@StuartdeHaro 11 месяцев назад

Yep. That’s why I lumped them in with end mill shanks and tool bits. Dowel pins have a nice finish and they're round, but they aren't going to be right on size.

@bwcordes 11 месяцев назад

Great video. I bet a screw driver type torquewench like what's used for scope mounts might work well with an adapter and a set screw through a socket

@stevenV57 11 месяцев назад

I tapped the like button with a force of 1.44(0.73)N.

@836dmar 10 месяцев назад

Just as with torque values, I tighten until the threads strip and then back off 1/4 turn. That’s about the right spot.

@StuartdeHaro 10 месяцев назад

Exactly right

@johnnycampbell3422 11 месяцев назад

I can tell you when I was working on aircraft where everything had a specific torque (and I used a torque wrench many time a day), I had a calibrated wrist (within 5 inch-lbs) from 30-250 inch-lbs.

@StuartdeHaro 11 месяцев назад

That's the companion to the Mark I Eyeball, right?

@johnnycampbell3422 11 месяцев назад

@@StuartdeHaro roger that.

@rexnemo 11 месяцев назад

What is quite interesting is to do capability studies on micrometers and getting two or three people to measure the same work piece . It is best if the people are not trying to achieve a dimension and working double blind so they do not know what the other person is getting as a reading . If it is done as an honest check then the results are quite interesting . I found that the best that can be obtained with a micrometer is about .... But wait that would bias your own study 😁

@randypankau1991 11 месяцев назад

Ok, Stuart, here's your repeatable method for applying torque. tape a bit of thread to the thimble and wrap around a few times, with a fish hook no the other end and use some 7th grade science class type weights to apply the torque. T = Force(weight) x distance(radius of thimble).

@StuartdeHaro 11 месяцев назад

I knew I could rely on you, Randy!

@oldvetteman9147 11 месяцев назад

Stuart, thanks for another great video. I'm sure that lots of your viewers are wondering about the status of your "new" machine shop.

@StuartdeHaro 11 месяцев назад

I'm working on another update right now as a matter of fact. Stay tuned.

@betatool-p5z День назад

U didn't mention exactly how many sounds or turns should it be in modern micrometers?

@StuartdeHaro День назад

@@betatool-p5z I've never thought about it that way. I just go until it starts to slip or click, then I wiggle the frame of the micrometer back and forth a few times to make sure the anvils are seated on the part. That's something you can feel pretty easily. If the mic is not fully seated you'll feel it jump around a bit until it feels like it's making smooth contact with the part.

@gehinarsch 11 месяцев назад

Solution to the problem, don't be cheap and buy a micrometer with a ratched, end of story

@chrisstephens6673 11 месяцев назад

Curiously buying the best can be a hindrance. Take the mitutoyo quantum mic, good and expensive but being 2mm pitch(80 thou-ish) with umpteen decimal places on the screen and with friction thimble getting the anvil dead square is not as easy as a ratchet on a cheapo Starrett.😂

@aceroadholder2185 11 месяцев назад

@@chrisstephens6673 I have to admit that is the first time I have ever seen "Starrett' and "cheap" used in the same sentence.

@aceroadholder2185 11 месяцев назад

gehinarsch, I have micrometers with ratchet or friction spindles and I don't use either feature. With a bit of use you quickly develop the feel to make a good measurement. If you are working close, say +0.0001/-0.0000 then you need to check your shop micrometer against a stack of gage blocks set to the desired dimension. In that realm your micrometer may be just fine but the warmth of your hand or a fan blowing on the work can throw off the measurement.

@chrisstephens6673 11 месяцев назад

@@aceroadholder2185 said in jest but have you seen the price of mitutoyo digital quantum mics? They are so expensive you fear using them in case you damage the paint. It took me three months to dare to not put in back in its box immediately after use, even now I have a padded tray in the head stock between measurings😉