DeWALT's New Flagship Drill DCD1007 Before They Want You to See it 

Dewalt may not like it but, I sure am happy for a sneak peek. Thanks for all your work guys!

I'm watching this 60 minutes in the future and its still not released yet

"Without [DeWalt's] knowledge" 😚 Nothing beats free advertisement!!!

You should retest in hammer drill mode. The 999 has a sensor in the collar and increases output in hammer mode. The 1007 appears to have this sensor too. (wire to gearbox) Not sure why they do this, but it's even on the sticker. 2000 -> 2200 rpm. You can 'trick' the drill by shifting back to regular drill without releasing the trigger. Also, I'm case you didn't see my previous comment, but a Megastack flexvolt (3 x 5PS) would make an interesting homemade battery. Keep up the great content!!

now just need to get your hands on the dcf 860

Maybe it's my M12-appreciating ways, but I favor the Milwaukee design priorities (torque and size/weight). Glad to see DeWalt keeping them honest the last couple years. There was a while there where nobody seemed remotely close. Competition is good and DeWalt is turning out hit after hit.

Great testing as usual. Cordless drills are incredible strong these days. It would be interesting to see what kind of numbers big plumbing drills make. Like Superholehawk and Dewalts big right angle drills. Maybe video idea for future? Keep up the good work :)

Literally my favorite part of Friday's!!

Best thing about this you didnt touch on is the side handle. It has notches in it now and not smooth. The old handle would wear out and not keep a good rotational grip on the drill making for some sketchy moments while using an ice auger.

Its great when you guys get your hands on tools before they're released. Have you ever considered testing battery powered mud mixers and large right angle drills, even if just to compare to the more traditional drills

I'm loving your content and the amount of effort you put into experimentation. I've been watching for about 6 months from London, thumbs up! I'm 18v Makita team FYI

Love this thing, I am an apprentice plumber that does new construction apartments. Alot of use of stud drills instead of hand drills as we need the torque, but alot of tools are getting in the baseline of using a corded makita stud drill which is standard for us.

Look forward to getting that protect feature. Thanks!

Another great episode thank you

I will Always Prefer DeWalt over all because it's always been there for me ❤️

Awesome! That new electronic Load looks nice too! 👍

There was something you guys missed, That I was hoping you guys would point out. On my DCD 999 When I use the clutch settings. 1 - 13 if I put it in clutch setting say 3 and Gearbox 1. The torque changes between gearbox settings. So, gear 1-2 and three all have a different torque. Even though you're in clutch setting three. I was really hoping you guys had noticed this and pointed out it's that whole electronic E-clutch. I really hate the E-clutch. Any other drill without an e-clutch when you put it in clutch one. It's a slip bearing type clutch, so it just slips. Every time at the same setting. These new electronic clutches do not do that. They constantly change. You could screw 5 screws and the torque will be different on all five of them. And then if you change gears, they're really different. Please Test this for yourselves, I would definitely buy one of these If I could go back to the old clutch style that would be an awesome drill. The other thing is, when the electronic clutch kicks in, it literally feels like the battery died. The way it dies, it's just a weird feeling. It's not like the old ones that slip, and they make the clicking sound. It's like it's a glitch like the electronics just burned out in your drill. If you do any type of woodworking, which is why I bought my DCD 999. I can't use it because the clutch settings are so inconsistent. I need something that slips at the same time every time. Maybe you could get the Dewalt to go back to the old-style clutches? Haha, I'll keep dreaming. But hey, you guys have influenced other companies.

Youre the reason why i have a dcf961 with 9ah flexvolt. So now im gonna replace my old red 2656-20 with this guy when it comes out.

New video right before i take lunch? Hell yeah!

Dewalt has done it again with a new version can’t wait to see the DCF 860!

Can you get your hands on a DCD130 at some point? I have one here, have been using it to mix 50lb bags of self leveling floor compound in buckets and it doesn't even sound like it will ever bog down at all, it might top your drill torque charts by a long shot.

My friday morning trips to the toilet are always so informative

Credit to Skil for being the first one I’m aware of that came out with the onboard work light mode on their power tools. Many of their lights are truly great. Kudos to Dewalt for stepping it up. TTI, your reply? What were the wires going to the gearbox for? Temp or speed sensor perhaps?

I have several Dewalt tools, (older drills mostly) that have worked very well for 15+ years and as you know drive deck 4" Torx screws in their sleep. I have started running the Milwaukee battery platform as I prefer some of their tools. That being said what I have been seeing with various reviews is that Dewalt is no slouch so my keeping that battery platform was a good choice. Thank you for another clear review.

We're getting promotional material of a soon to be released new DeWALT impact driver here in Australia.

And here I was looking to pick.up a DCD805 in the next week or so. It seems like the 1007 is a direct successor to the 805 in some ways. This video couldn't have been uploaded at a better time,.thanks guys. I appreciate all the hard work you guys do. 🎉

I'm good. The brushless one I have now damn near broke my wrist a couple of times when the hole saw and spade bits snag unexpectedly. Plenty powerful already

I’ve really been liking this new DeWalt Dynasty

Have you brake tested the new metabo hpt dv36dc with the level feature and rfc but I’d have liked to have seen it and the Bosch but the mhpt in particular as that one I think that size wise it’s more a direct and probably more suited competitor of the new m18 drill

Did you use the forge battery on the m18?

I still think you need to Have your viewers send in their used tools to get them dyno’d. I have an M18 impact that is absolutely abused, same with an M18 hammer drill. I would love to send you both Michael and see if they have survived

One metric I am always interested in with these drill/drivers is slowest possible speed. It's the reason I still reach for my old brushed DCD950 over my impact drivers any day. Sometimes you need that finesse to drive a screw that 1/4 turn (or less) further, and most drivers just can't do that. If this new DeWalt can, it'll replace my old 18V in a hurry.

Looking forward to its release, buying one

That kickback protection is a wristsaver. I'm using thick french bolts into 4x4 pretty often, and that task needs this kind of watt output without using the hammer. I know the lads that climbs the telephone poles are using these tools as well, which up to this, only Bosch have the mustard for it. W or torque per db would be a handy stat too.

Hey TTC did you see that video of the DCF870. I would be interested in that unit too. The DCF860 appears to be shipping now.

I still use my dads old corded beast. When it's needed, it's time to break something or break myself trying

Hey I seen on the spreadsheet that you don’t have any testing on the Matco .5 HP die grinder I have one you could borrow to test if you would like

I'm just going to say, i use my 9 amp hour on pretty much everything but the baby impact. 🤣 I like how that extra weight smooths out the operation. Thus, i appreciate seeing those numbers on everything lately

Can you dyno the dewalt flexvolt mixer/drill? Dcd130? That thing is epic, I have it. Would also be cool to see the dcd470 vs the super haug m18.

Hope you guys can get you hands on the DCF860 and DCF870 soon

You guys should look at the black sub compact Makita 18 volt hammer drill. I'm a heavy duty mechanic and have consistently been drilling 5/8" holes in semi frames when mounting tool boxes with it. Its defiantly hard to do with the size of the drill physically being hard to get two hands on. The sub compact size and durability are hard great though. I've been feeding it an ass kicking for about a year now and its holding up great. Fits inside a piece of c channel for doing deck boards on low bed heavy haul trailers as well.

Just waiting your very reliable and enjoyable tests in a near future of the 1007 combined with the all new powerpack 8Ah By the way, thank you again for indicating the equivalent torque and weight in metric units - a follower from Europe

Hey TTC, I'd love to see you test the DeWalt DCD130b drill. It is a beast, and often gets used to drive ground augers.

Kind of wish they'd release an update to the DCD 800/805 with a handle or the new kickback protection. Those are really the only functions that make me want this new one.

Not sure where to post this but seeing as this is a drill review......I have a venerable Makita dhp451 that I love.....I m struggling with what should I replace it......or should I rebuild it? Your greatly respect your knowledge and thank you in advance for any direction you could give (UK based) .

This drill reminds me of an older Dewalt 18v hammer drill that I have and keep around because it is so good. It is a 3 speed like this one, which is really good. The variable speed is linear without steps in the speed, unlike the newer Dewalt 20v tool that I have and a small drill centers in the chuck, unlike what happens with the newer drill. There is also something about the angle of the handle versus the chuck (or something) on this older drill which lends itself to being easy for me to drill perpendicular holes whereas that is harder for me to do with the newer drill. That newer drill I have is not up to the standard that I was expecting based on that older drill. Hopefully, this new drill, tested here, raises the bar back up to at least where it once was.

What if you guys did a test for sockets? I know you have the 6 point versus 12 point and spline video but what if you did it the same format as your wrench videos? Take 1-2 sizes from a bunch of different brands and see which ones slip first, maybe how they grip on soft metal versus a hard one?

I've had my hand pinned against a wall drilling using a old corded drill. I can't remember why now but it wasn't possible to be able to reverse the rotation and get free. It was a wrist breaker. I pulled a bit of skin off scrapping my hand away from between the drill and wall.

I'd like to see an addition to your drill test. Two high load continious test like driving thick and long screws into wooden beams at high speed (wattage what you think is realistic) and a test at 85% of the load before it stalls if that load is higher than the woodscrew test. If the tool overheats and what the battery has tk say about that. I mean high battery temps are certainly not good for durability.

Do a video over the new 3/4 ingersol Rand 20v impact

The DCD 800 & 805 also have the fancy LED swivel light.

can you compare some of the 18v metabo hpt tools vs the 36v versions? i can't find any reviews to figure out if the 36v angle grinder is worth it or not over the 18v

I’ve been debating on purchasing a Dewalt cordless ratchet because of the review you did but I’ve seen that there is a smaller version that looks faster and it’s the DCF500 have you seen it?

All that was left was to thank the Brazilian channel for the images included in the video. #agradeceaoassis

Test the DEWALT and Milwaukee mud drills to see how they rank

Hey is there anyway you could test the new Skil compact 20v drill and impact driver please and thank you?

Need to do a break down of how the mellif tools are. They keep coming out with new ones

There has been a drill popping up in my suggestions lately, that's getting a lot of good reviews - DEKOPRO 1/2 Inch 580 ft lbs High Torque Brushless Electric Impact Wrench Driver, especially the more powerful one. Would love to see your professional unbiased take on it. Cheers and thanks for your service!

The new GOAT for drilling holes with an ice auger.

what brand is that digi caliper? thanks

DeWalt has really stepped up their game lately. Almost makes me annoyed that I'm invested in Makita LXT which seems a bit stagnant.

Do you have any schematics for your load tester setup?

999 is an awesome drill with 6 or 9 flexvolt

Hope you guys got some of the high output Makita batteries while you where in japan!!

I really want makita to make a refresh of their GPH01 40v drill, their GDT01 impact driver, and all 3 of their impact wrenches to top dewalt. Once we can get the BL4040F here in america, I would love to see you retest the 40V tools. We have been waiting forever for that battery :(

Really expected more from that dewalt. For its size and how chunky it is it should smack milwakuee with torque but it might be the same story as it was with 961 torque wrench that wasn't really all that special as an unrealeased weapon.

I'm not sure how it ranks against my Makita, but even with the huge side handle fitted, when that thing bites, it hurts! I can't imagine anything with MORE power. I had the battery up against a file cabinet one day and it bit, and it flexed the handle and pushed the file cabinet a little bit and still magaed the sprain my wrist!

Can someone explain the difference between peak torque and watts out? Is one measured in low gear, and the other in high?

How's new seesii 760? Is it any good?

There’s no problem or you can make a video of the E-work impact wrench 950nm please 🙏

While the Milwaukee retains a peak torque advantage, it seems like this tool is designed to handle a load at speed. In practice, I imagine that might allow the Milwaukee to power through even tougher drilling tasks (e.g. massive holesaws in hardwood, oversized spade bits, etc.) without cutting out, yet Dewalt would presumably have the advantage in most tasks that don't stop it due to its ability to keep a higher working speed.

Cant wait to bug my Mac guy about this lmao

Now you guys need to get the NEW XR DCF 860 they are ADVERTISING it in AUSTRALIA for orders and I'm thinking about paying the PIPER and getting it shipped here for my RU-vid CHANNEL

I appreciate what you're doing here - I drill steel plate mostly, depending on the bit size, I have to use an extended handle longer than the one dewalt uses to control the torque (w/dewalt dcd999 - no clutch - on drill setting 1) - it can get dangerous - but watching your video, it seems like you're using just your arm to absorb the drill's torque w/ no side handle - in low gear 1 that drill would rip out of your hand, unless you were leaning down on it using a lot of body weight/serious arm strength - impact drills use the mechanical advantage of the hammers - rotary drills it's all about the leverage from the side handle - with no side handle, you better be a gorilla or your arm could break, or you get thrown - so explain how you're doing it - thx

they just announced that it comes with the new 8.0 amp hr powerstack so i hope you end up testing it with that.

Looks interesting! While I love my dcd805, this looks like a fun big brother to have around, as long as you've got newer battery tech to fuel it. But yeah, I feel like a lower first gear wouldn't have been a bad thing.

Can someone confirm if my thought process is correct? Measuring power at speed makes sense cause horsepower is torque times RPM, and horsepower and watts are the same thing, just different units, right?

I know it's a completely different category, but could you please test the Bosch GSR12V-300FC??

More weight is more strength more thermal capacity more reliability, however my old 996 is still great despite a lot of serious abuse except the chuck which is its archilles heel, mainly because it's super difficult to replace. If this is equally hard to change then I guess it's at least not worse. Nice drill :-) more compelling to me than all thr 999 to 996 models in between

"ZU" isn't any kind of branding, it's German for "close", i.e. it's telling you which direction to turn the Chuck to close the Jaws.

This is going to be kitted with the new 8ah tabless DCB2108 battery, curious if it puts out even more power with that.

Can you test the new Dewalt dcf860 👍🏻

Why would Dewalt be upset? They should putting your reviews on their box!

That 9 amp hr flex on my flex advantage grinder will last all day an grind like a corded grinder

They’re using their 1/2” mid torque motors on these drills now! No joke. The tuning is obviously different though.

Try the newest Hikoki/Metabo HPT drill aswell! Rated at 155nm.

Can't wait til you get tye new impact that I keep seeing oversea 🤞

Hey TTC, this year with my tool allowance I’ve switched from Milwaukee to DeWalt, So far for impacts I’ve picked up the 850, 922, and the 961 along with a few of each PowerStack battery. I’m staring to think I should have gotten the 3/8 Atomic, (but I chose the 1/2 because of how much better the 1/2-3/8 adapter works compared to 3/8-1/2 adapters.) instead I’m looking to get another mid torque like the 891 that is easier to wield than the 961 to bridge the gap between their applications if you know what I mean. My question for you is: about 20 bolts into using my DCF961, I used it pointed down (impacting from above) with a 8” extension and for a moment it spun but failed to impact. Ever since then it works fine and destroys every socket I put on it, it massively out performs all of our 1” air guns(and our air system is much much bigger than yours shown in channel because we run a manufacturing facility on it lol) BUT IT SOUNDS KINDA CRUNCHY😅 By that I mean I’ve noticed it almost sounds and feels like there’s sand in the gears if you know what I mean? Does yours operate smoothly without the internals feeling and sounding a little poppy and crunchy/possibly bindy ? 😅

Dewalt better be sandbagging with those numbers. Otherswise they made a big mistake with that first gear, again. They could have easly dropped those rpms super low. Heck, it has 3 gears for a reason lol

Does it have "easily" removable chuck. Screw Inside? I had to change one on my 999 and it was quite the endeavor.

Between these guys and PF they sure need to collab on something..

For years, I have always bought nice Dewalt drills. They have always had excessive amounts of power. They can't be very far from human wrists being the limiting factor for their power.

I know y’all do impacts and stuff, but you ever think about doing chain saws. Like electric chain saws?

I know im 2 months late.... but there's one big design flaw that i hope they tweak. It has hammer capability, i dont know about anyone else but when i use the hammer function, i usually place my other hand on the back to help push.... right where the air inlet is for cooling.....

U need the new powerstack xr 8ah battery an see how much power the drill has

good timing. my old drill broke.

IT’S FRIDAY!!

Can’t wait for that dcf860 or it’s Frankenstein. You can get it in Australia and from what I’ve seen this far, it will be the 961 of impact drivers.

Better you advertise it for them. Dewalt is terrible at branding and advertising. They release competitive tools to milwaukee and I buy both now. But I wouldn't know about the latest models without channels like this.

Does it have a mechanical clutch or one of those stupid e-clutches that never work properly like on the 999&998?