DeWalt vs Milwaukee | Which Toolbox is Better? 

Amazing video work and you are a natural presenter! Thanks for the mention, drawer systems are amazing, cannot recommend enough, the biggest influence for me was if I could fit my power tools into them and the longer drawers of the DeWalt worked out best!

this channel is the reason I was able to find and organize my tools. Made my work so much easier. Thank you so much

Have you cut any foam for the 3 drawer version ? and do you have the precept ones in stock for the 3 drawer ?

Have toughsystem ,bought my daughter a packout which I prefer. I am going upgrade next summer to full drawer toughbuilt. Looking forward to full drawer system. I hope shadow foam does inserts for the toughbuilt.

I haven't got mine organised in foam yet but even just switching to the three drawer packout has made my work so much more efficient, I'm not diggin through a crate full of hand tools to find what I need and I can see all the tools I have easily. The locking handle is brilliant for transport as well, don't have to worry about them coming open while driving round

The DeWalt System is pretty good and like you said is a bit more cost effective, but I do prefer the Packout, for the different options that are available both from Milwaukee and third party accessories. I did look at the Makita Makpac drawers, but they just don't seem to be as well built or as robust, might be a good option for you as a comparison to these drawers though.

So glad I came across this channel.

Systainer three drawer unit for me, works great with shadow foam 🙌

Einhell. Love your videos my friend, always great to see. Bought the DeWalt stak based on your reviews!!! I've been slowly gathering Einhell 18v tools, firstly from wicks and then other stores started stocking, all brushless as well which is a bonus. Power and durability is there Also reference an old video it's Tooth haha Hi from sunny Cardiff!

My foam order came earlier today, looking forward to sorting out my Tough System 2.0. I have a full set of Klein insulated tools, and a set of ordinary Klein multi bit drivers 11 in 1, 4 in 1 stubby and 4 in 1 precision which have proven to be questionable. Some broke ( note to self - precision drivers are not pry bars 🤣 ) some I lost and some rusted. To replace the bits was as much as a new driver ????? so I'm looking for a replacement brand, those Milwaukee drivers look nice, but I'm akso looking at Wera, Armeg and Wiha. I recently bought some Milwaukee hollow nut spinners, they are outstanding and thats why I was interested in the set you used...............

So the algorithm sent me this video in my feed. Gave it a full look and say cool. But the reason it sent it to me is because I commented once "I don't get foam", when I saw a tool review and it came with foam. Commentors were saying "I can't wait for X?X brand to bring out more"! Yes totally organized, and maybe for a shop tool box makes sense, possibly, but honestly, all that lost space I'd rather have more tools, JIC, especially if it's a pack out. I know everyone has a story about rebuilding a trans, rear-end or something on the side of the road with a multi-tool, but I did pull the TC from a jeep Cherokee in a bone yard with my 16x8x7 Craftsman Tool box. It's heavy could have 30 pounds full of tools. The only tool not in the box was a 30" breaker bar. I bet neither of these comes close to that in terms of weight, yet look a the room they take up? Want to add a second "spanner" just toss it in, yet now you have this pretty foam thingy what are you going to do? Lay it all out again? I'm just not a fan I guess. I get it, I do, I just don't get it. If I was a mobile mechanic/ service guy, whatever outside of our plant/shop, it'll be nice to see if any tool was left some where with just a glance, and that could you save you, but pick up when your done and make sure you didn't leave that pry bar on the intake after tightening a belt... Nice video and nice looking products... I could see this for many more applications, but just not for tools...

Shadow Foam looks great. I have Milwaukee Packout. Your black Packout boxes are cool. I have only seen the red packout in USA.

I'm using Milwaukee Packout there are working great, tools, nuts and bolt has it place when we go to the race track. I'm planning to replace my metal tool box with Packout drawers with inserts.

I've owned every major brand from Ryobi, rigid, DeWalt, Makita, Milwaukee, to Hilti. And price per preference Milwaukee wins hands down.

Very nice set up, But I really struggle when people have such a mix of tool brands, I’m an electrician, I use three main brands of tools. Power tools are Milwaukee Cutters are always Knipex Everything else is Wera. I do have a few other brands i use but they are not mixed up with the rest, like my hammers are Estwing. All the odd branded tools are put away in a packout crate in my van, all neat and tidy,

Be sure to check the smoothness of the ratchets before buying. I purchased the DeWalt 192 piece socket set (which thankfully was all 6 point sockets) a few years back and I noticed the quarter inch drive ratchet didn't spin very smooth. The store let me search through three other sets to find a decent ratchet but they were all pretty crappy also.

How about a 3 pack for the three drawer TS2.0. Do you sell singles?

Could u possibly do a stanley fatmax set up love the videos mate

nice video, will you make foams for Poland system Qbrick ? nice and budget drawer

Hi, I’m a relatively new subscriber and love the clean look the foam has where is the best place to buy ? I was looking on a shadow foam website but I can only buy in multipacks that don’t actually suit the number of sheets I need and ends up costing more money for some foam I don’t even need is there a solution without spending a fortune ?🤔🤞

my mate used to do this with polystyrene for his socket set and used to heat up the socket and melt it into the polystyrene to keep it orginised

i wonder if anyone would creat an adaptor for these. I would love to have the Dewalt Drawer on bottom with powertools and the Milwaukee on top with sockets and wrenches. I know its not do-able but i think the sizing of the draws would be perfect for my needs.

I do try and buy full sets of sockets and wrenches. I hate missing a couple sizes.

Excited for tough built

Dewalt for me! And love the Yellow & Black color scheme.

That clip from the burbs was great my fav film 😂😂😂

If ordered do you make it all the cut outs?

Did you do the dewalt 3 drawer?

Do you ship your foam cutting tool to the US?

Have both Dewalt and Milwaukee power tools, looking to buy the Packout system.

Both look great.

No always been macpac as it holds all my makita kit. But would love to convert over packout. Just the cost. As im all in now with makita.

Packout system is far superior, like you say, though there is a big price difference between the too, the new toughbuilt looks like it could be a good alternative, though

Will do thank

11mm spanner needed for m6 roofing holt (square nut) electrician very used size spanner. Thought you maybe interested. 😊

I buy the Tstak system because of how much cheaper it is. It's drawers are also top notch

Packout has changed the way I work 😊

The packout system is the best out there and much more well thought out. Makita is flimsy case.s, and i have broken a cpuple over the years. Dewalt tough case are pritty good too as i have one or two to house my burn kit for soldering. But pack out system ❤

I do however like the new modular system that Toughbuilt came out with.

DEWALT Battery Ecosystem. A mix of Tough System T-Stack, 2.0 and Cases.

I’d say I’m a dewalt fan but Milwaukee is definitely a lot easier to access tools other than dewalt pulling out foams

I like Dewalt there is more to choose from and never had issues

I like how you put that stubby screwdriver at an angle for the OCD madafackas! 🤣

Packout for me mate 👍🏻

What about the DeWalt 3 drawer?

Peli 0450 🤣 because I'm a glutton for financial punishment. But I've foamed the cantilever Stanley fatmax with a double deep layer of foam in the bottom for a nice cheap 3 level box with all your tools visible at the same time.

Why are the Euro versions black, not red like in the US.

12:06 okay who’s the It’s Always Sunny fan, you or your editor?

Can you do Dewalt TSTAK vs makita matpak

A volt stick without insulated screwdrivers ?

12:06. Alright who’s the It’s Always Sunny fan? You or your editor?

Still waiting for you to do a Snap On toolbox!!

I’m a dewalt man of over 35years but like the best tool for the job so own other brands have t stack and toughsystem 1 and 2.0 but most likely swap to toughbuilt when available not used shadow foam yet as can’t decide what to put in the boxes as too many tools 🤔

I like Milwaukee packout, there easy to get and unlike dewalt you can gett in lower cases.

cool vid i am packout only its the best system by far

DeWalt but I wish they had more stuff

Dewalt for me and already sorted with Shadow Foam 😊

DeWalt works best for me. Love watching the toolbox organising videos.

Milwaukee it just feels better in the hand I used to have a DeWALT drill and it was horrible in the hand so Milwaukee wins hands down

I think Milwaukee wins with me. It’s a little more hefty and has the aluminum corners to protect from impact. With dewalt you have a big chance of snapping the lever off when you open and close the drawer. Milwaukee is superior to that because they have the locking bar a very simple but strong way of holding the drawer shut during transportation. Only drawback with Milwaukee is that you sacrifice drawer space so those longer tools will not fit

I agree that the DeWalt hand tools are a bit on the useless side. The thing about DeWalt hand tools is they are simply rebranded Stanley hand tools and nothing more. Yes, I know, I know. Stanley hand tools used to be decent tools. But once they started making them in China, their quality tanked. So, SBD decided to stamp DeWalt on them and raise the price just a bit more. Although, those wrench sizes are quite common here in the States.

Bosch and Milwaukee

i use DeWalt for DIY purpose at home and as i am a mechanic on cars i use a miss match of tools impact and impact driver is mainly Kielder and the rest of the stuff is sealey draper and lazer tools

Big red all the way!!!

Salut Shadow Foam, excellent vidéo, je préfère Milwaukee, bonne continuation à plus JEAN.

These are great and all, but for me, since I am from canada the price for shipping alone is almost as much as the product itself so it isn't really worth it to me

I cut some of the Milwaukee foam that comes with their top boxes and that was a nightmare. We have another brand here in Canada that starts with a K. That is the brand I am going with next. I can not afford to buy shadow foam and have it shipped to Canada. That way is way to expensive. If I could get shadow foam at the same price as the K brand here in Canada I would love to give it a go, but that is not possible so sorry shadow foam.

Milwaukee. Red and Black all the way.

Foam inserts don’t work for me. I’m a millwright and pack lots of tools to the work area plus there are lots of emergencies so as long as wrenches end up in the wrench drawer, screwdrivers in the screwdriver drawer, I’m good

I love All tools 🎉🎉

I need a drill what the best one to get for ever day jobs around the house

well both of these have been left gathering dust because milwalkee just refuse to update theirs and are still using the exact same design as the originals and they just arent as robust as some other brands, Dewalt have updated their Tstak system to 2.0 but that still leaves a lot to be desired, other brands like Klein and Toughbuilt, even Flex are all better than these options and im sure the new makita ones coming very soon will be better too. The only thing going for milwalkee is their extensive range of accessories, which nobody should be buying toolboxes just for their accessory range. I have bought Many boxes, bags and systems over the years and they all fall to bits in a few months. Finally now we are starting to get more heavy duty options, with the functionallity of the likes of milwalkee. I wuld honestly go with milwalkee if it wasnt for them being made from inferior plastics and so flimsy. They work fine for diyers or if they stay in a workshop, but drag them round sites for a few months and they can go in the skip. One big thing to watch for is all these brands are now going the drawer route for easier access, but the drawers dont last long because most of the drawer runners and/or plastic just arent strong enough.

Milwaukee Full Disclosure......makita tools in Milwaukee packout 🤫

Just switched from Bosch to DeWalt.

I've owned all different brands of tools over the years but most of my main tools are dewalt

Stanley fatmax v20 and Milwaukee m12

Milwaukee, hands down

For me it has to be Bosch

dewalt handles auto lock is clutch and it’s deeper so you can fit drills and other power tools…

Milwaukee for power tools and Halfords Advanced for hand tools

I use Makita, but would much rather Milwaukee

The DeWalt just has a much smaller foot print than the Milwaukee. And foot print is a very big deal if you have to load a van up.

美沃奇一票，雖然它很貴

Snap-on 😎

I use Walmart hart works ok enough

Dewalt here

Milwaukee all day

Milwaukee packout

Milwaukee

Festool ❤

In america it is just as silly not to have 19 mm or 10mm. heck just for my trucki have a ford and you cant touch it without 8,10 and 19

Dewalt

Halfords advanced are descant

Definitly Milwaukee

Packout

Milwaukee for Me 🛑

DeWalt

Milwaukee 100%

Dewalt is the best

milwaukee