Did It Survive? PSA GF3 AK-47 1,000 Rounds In 1 Hour Review 

Awesome thank you for this video I was actually looking into them to buy a gen 3 Once I move out of where I'm at the blood red one wow this was amazing thank you

@@luigiviking3667 Cool! I'm loving this one 😀

When a rifle is hot it effects the accuracy a little bit. You didn't mention if it maintained while it was burning hot

@@chupacabra4897 I wasn't testing accuracy in this video. That wasn't my intention

@@2aEdu yeah man I hear ya and appreciate the video . But I just wondered how accurate it was after it was boiling hot. 🤔 Great video

What brand magazine were you using with your gf5? It’s funny when people use the worst most garbage magazine in the Ak and it malfunctions so they think they sound so smart by blaming the rifle

Richard Robinson probably used a magazine that he had buried in his backyard for a couple years and then when it jammed he is all like "hehe look at this gf5 malfunctioning"

@@jfuzzymans9080 lol cope much? Actually, I was using Russian bakelites, Bulgarian 30s, Romanian 30s and many other good brands. I don't use trash mags. Secondly, PSA knew of the problem and later fixed it. It was an issue with their firing pin channel being out of spec allowing the firing pin to extrude too far causing the primer to burst sending pieces of the primer into the firing pin channel. Any other questions simp?

I would also like to know what mag. Mine runs magpul and the provided psa mag just fine. Bulgarian surplus do not fit and need to be slightly modified

@@Ellienollie all of my mags fit my PSAs just fine. Bakelites, rommies, east German steelies, Hungarian tanker 20s, Chinese flat backs, bulgy steels and poly mags.

Thank you! The GF3 is doing great so far. I was a good time 👍

I just got 1 too. I take it by your comment the 4340AQ trunnions are better than older 1s? This is my 1st AK and have only ever shot 1 (don't even know brand or model) years ago once.

@@brentreeve7554 You are correct. The 4340AQ are much stronger than the older 4140 steel trunnions. This PSA AK is very well built.

​@@blackbeardgamer5909nice,I just got a used gf3 and it has that front trunnion.

Awesome, thank you!

I agree!

Thank you! I had a great time and am glad we got to hangout again.

Awesome!

They are on sale for 599 rn

What is the difference between a blem and odg just the color??

@@oscarvillalobos2453 There is a slight blemish somewhere on the rifle.

I like this ammo too. That was cool of you to load all of that. It was an awesome day. I am already looking forward to next year. You are welcome man 👍 I am going to post the video with your 10mm soon. I have been super busy, and also dealing with issues with YT behind the scenes. Some of their manual reviewers restrict stuff that is totally within guidelines. It gets frustrating.

@kurt24 you're the man! Glad you got to get out - hope you enjoyed the trip! Hat is off to you for the 1000 rds you loaded 💪🇺🇸

Fancy bumpin into you here.

Cool!

Thanks man! I did too. I'm glad you were there hanging out with us 👍 I can't wait either.

Thank you!

Thank you. It was a good time!

Thanks man!

Thank you!

Me too!

Before I saw the video i saw your review and yess you are Sir!

That was me. Thank you

That is my friend Jeremy 👍

I feel u im in pittsburgh pa what r the odds live in bethel

Bout to buy one myself

That’s exactly why I ordered one

I talked about the "light primer strike" and clarified it as hard primer in this video. I agree that PSA is making great guns. I have seen all of it behind the scenes and am even more impressed with what I saw.

It's a firing pin issue, some like to get stuck especially on the hi spec red army ammo. if you take a punch and widen the pin hole it fixes the issue. It was common in there original gf3 series

@@2aEdu Agreed. I'm watching your video 5 months out. But I'd tend to agree. Hard primers are true of alot of mil-surp or "new" ammo made off of old Warsaw Pac machinery. So if the rifle was fed Western or perhaps higher end, Eastern European, brass case ammo? Much of the light strike phenomena might disappear. The only alternative I could think of would be a firing pin replacement. Or perhaps a smoothing or cleaning of the firing pin channel inside the bolt assembly. Sometimes dirt, unburned gunpowder, and general carbon/metal debris from firing a rifle can cause trash to collect inside the firing pin channel, causing drag on the pin and thus retard or slow its velocity down just enough to cause a light strike or no strike misfire. All in all. I'm glad to see ANY American manufacturer turning out a decent, "off the rack" AK copy. Hopefully one that can compete with any AK builders gun using Saiga or other "original" former Soviet or Warsaw Pac AK parts. Such AK's are sometimes very nice if properly put together by someone who has both the time, parts, tools, and knowledge to do so. But are often out of reach, cost wise, for an average working class guy or gal on a budgeted income.

Thank you!

Thank you!

I know! Me too 👍

It was!

It is a great PSA.... lol

It was!

Hope you enjoy it! If you want to email me your order number, order date, and order sub total, I can get credit for it to help keep the channel going. I have affiliate links with PSA, but I cant post them here. I do on my Locals community though.

@@2aEdu Will do. What's your email address?

@@kingofshrimp Thank you! If you include your address, I will also send you some 2a Edu stickers if you want them. 2aeduperks@gmail.com

Battlefield Los Angeles had a GF3 hit 17,000 rds.

@@punisher9oneone I’m hearing good things about the PSA. Battlefield LA had a WASR with 115K through it

Cool 👍 I will be back down there in 2 months.

Thanks!

It was a great day. I'm glad you had fun, and I'm glad you were there! It got really hot lol

@@2aEdu boy you're not joking lol

Thank you. It's all good with the water. It didn't do any damage. The steel would need to be glowing to mess it up with water.

@@2aEdu OK. Cool. I was worried

I'm loving mine so far!

Thank you! It ran great so far.

It's a very nice piece I bought one myself

Probably the only one I would buy as well. PSA AKs I mean, because I just got another one today. lol

@@2aEdu very nice. They have nice barrels. I'd love to get a tula kit from them but a little to deep for my pockets unfortunately.

This might be my next one I buy my first one I just bought not to long ago is a damn sweet rifle Zastava ZPAP m70 or a good ol yugo

@@kyletaylor2741 Great rifle. Ive got well over 3k rounds through it, the only trouble i had was the cover release pin got stuck. I sent it to Zastava on a Monday and had it back in my hands that Friday. Fixed.

Nice! Lets Go Brandon!

I'm not sure, but I think he is more of an AR guy. I think he did a fine job shooting it though.

Don't buy the pioneer. Buy the gf3 if you cant afford a Romanian wasr or zastava

Thank you!

@@2aEdu I want to buy a 2A sticker

It was a common issue dealing with the firing pin sometimes getting caught. Alot of people changed there pins or widened the hole and never saw issues again. Great rifles just gf3 was the start of them making ak platform weapons

Mine has been great 👍

Someone in the comments told me I needed to do 5k rounds. I told him if he is going to send the remaining 3900, I will shoot them all in a day. lol Minnie Pearl 😀

Me too. I just picked up a Nutmeg GF4 today actually.... I will review it soon.

Cool 👍

Injoyed the video thanks 2a

@@randomruss651 No prob. Thanks!

It is in great shape. I showed the inside of it on a Locals stream after I did this video.

No prob 👍 I hope you are doing good.

This one is a blem

Love buying way marked down blem rifles that usually at most have scratches or paint chips missing

Very true I just got a Blem AKP from them. I dont see a mark on it! Saved me 200.

I got one and the blemish is the little scratch where you move the safety from safe to fire mode . Lol you have to have a magnifying glass to see it . They are really brand new rifles and about $100 cheaper than one thats not blemished the only thing that slurps about them is the furniture the grip especially but I grabbed me a us palm grip and Atlantic stock I just ordered an aim sports long handguard for it. They are awesome rifles and very affordable and upgradable ,👍

Excellent!

Thanks man!

I said, I am going to do a follow-up showing the inside. This video was already long enough. I will get it posted soon.

It will be fine Jmac on RU-vid shot 4k round full auto no problem

If you do get one, and you don't mind... If you go to my Locals post and use my link it will help me keep the channel going. (In the pinned comment of this video,)

@@2aEdu yeah that can be done

Thank you. It is a great rifle. We are going to put another thousand through it in an hour this Nov. I will have another video like this one in a couple months. @@konaboss83

I agree 👍

That it does

I said there is a follow-up coming of the inside 👍 This vid was long enough already.

Thank you!

Yep!

Should.... but all of them don't, but this one has been good so far.

Forged bolt

Thanks man!

@@2aEdu your welcome

Heck yeah. It was awesome hanging out with you again!

I talked about it near the end. GO Bulgarian made. Check the pinned comment for my Locals post with more info on it.

Checkout the link in the pinned comment. My Locals is free to join and if you use my link it helps support the channel. The tags is just me having fun with some trolls. Lol

@@2aEdu Thanks man! Any chance to troll some trolls is time well spent.👍🏻

@@Steelcity77 Heck yeah! whenever I do a Taurus pistol unboxing, a few people would get mad when I didn't peel the sticker tag off thr trigger guard during the initial review. So I kept these on for 2 videos and 1100 rounds.... 😀😅😅

@@Steelcity77 BTW, I am going to show the inside of this in a video soon. I am very happy with it so far.

We shot them on camera! Watch the video

@@2awarrior ?

I watched the entire video. I'm sick lol. I guess the rounds went off the second time. Lol. Don't be a dick

I ran each of the 2 rounds with hard primers in this video. They each fired the 2nd time.

@2a Edu yea. Sometimes they won't run 2nd time. Kinda was thrown off when you showed primer back in the shop at end of video and forgot you fired them again. Lol.

You won't find um cheaper bro. What do you want someone to give you one ? 🤣

Some braces are basically just lightweight stocks. I’ve got an ar pistol and the brace simply cannot function as a brace but it makes a fine stock, definitely doesn’t look great.

@SAIDER206 it may get a lot easier to buy one now cause people might not want them anymore due too circumstance. Yeah the AK pistols are probably better because of no buffer tube!

Hey 👍

GO. It is a good price. I have posted it on my Locals Community recently.

People often want to know if a gun is "go to war" ready. I haven't even shown the inside of it yet. I don't think it is fair to say I'm not maintaining it.

It’s nice to know that once you lube it, it’ll run n run. Bc nobody is going to stop shooting so u could re-lube in a prolonged gunfight. That’s the whole point man

Hey. I hope you are good! I'm loving mine so far.