No video :(

DiResta Judge's Gavel in Brass

Подписаться 2 млн

Просмотров 175 тыс.

50% 1

Starrett promo code is Diresta-0120 for 10% discount and free freight on these items.
This promotion run till August 28th.
25-441J Dial Indicator starrett.com/m...
S829EZ Hole gage Set starrett.com/m...
827B Edge Finder starrett.com/m...
Thank you Starrett !!
DIRESTA SWAG HERE: imakeny.com
For this metalworking project I make a brass Gavel for my buddy that just became a federal judge! I use many traditional methods I’ve been learning and practicing .. and some not so traditional. See if you can point them out in the comments below!
Please buy PFERD products!
www.pferd.com/...
Support me here at patron for access to voiced over videos
For 1 dollar pre month!!
/ diresta

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 324

@ThisIsHowIMadeIt 4 года назад

When you go into slow motion suddenly - there is now so much tension in my head thinking something is going to go wrong. It's suspenseful!

@jeremyspecce 4 года назад

Me too, I was ready for something to go flying off the lathe!

@tomweinstein 4 года назад

Machining brass freehand with a razorblade is the most diresta thing I've seen all month.

@timbohouston 4 года назад

Simplicity is the best answer sometimes.

@mxcollin95 4 года назад

Every time the video slows down I get nervous waiting for an accident to happen. Lol

@richardmiller9154 4 года назад

SAME!

@truthymchurtsalot7188 4 года назад

SAME!

@allenwilson9656 4 года назад

It scared me him using that razor blade as a smoothing device 😫

@Ramingo1983 4 года назад

ahah me too!

@6justin9 4 года назад

Same here.

@huddy32 4 года назад

Not going to lie,,, this is the Jimmy I fell in love with,,

@tommypouncey5667 4 года назад

Now it’s just ads and sales pitches... I don’t think he’s made something for fun in the last few years p

@poundkake13 4 года назад

**baby voice** this guy has to.... *sniffles*....make money to survive. 😭

@jimmydiresta 4 года назад

Tommy pouty I have fun ever day. I make fun every day. And money.

@tommypouncey5667 4 года назад

Aww jimmy shillresta and his rattling pan got upset.

@notsonominal 4 года назад

@@tommypouncey5667 thb i don't get it; i saw no ads (premium

@agentkapser 4 года назад

that gave me some "old time diresta" feels, nice!

@pauleugene8286 4 года назад

Machinists: You can't turn brass with a razor blade. Jimmy: Watch this.

@richardmiller9154 4 года назад

Coronavirus: In these uncertain times... DiResta:

@dimitrioslykissas7981 4 года назад

That's a pro-move right there.

@micaelalves6804 4 года назад

This could go wrong in so many ways AHAHHAHAHAHHA

@loupitou06fl 4 года назад

That's nothing - the skew chisel without tool rest at the end is crazy. I have soiled my pants more than once with this tool - on the wood lathe WITH a tool rest....

@LaserGadgets 4 года назад

Still cant believe what I saw. And I idiot sandpaper stuff until my hands are wrinkly.

@sirgermaine 4 года назад

Hey, a video sponsor that actually makes sense with the video. That's rare nowadays.

@bennydesign 4 года назад

Very true .. those "skills****" promotions don't really scream "I know what I'm doing".

@LaserGadgets 4 года назад

Fun fact: When you say HAMMER in germany, its either the tool, OR a statement like KILLER/HOT/AWESOME. Not that anyone asked for it, just had to think of it.

@crankstonshnord6591 4 года назад

That trick at 11:48 of holding the tap vertical with the drill press is inspired. This is what I like about your vids Jimmy! I think this video is a good example of why historically people leave grumpy comments on CNC videos. We are all spoiled with being able to see the high-level of craftsmanship as it's happening. Not that the craftsmanship isn't there in CNC projects, it's just much less visible.

@michaelbatts7149 3 года назад

Hear ye, Hear ye! This machinist class is now in session! the Hon. Jimmy Diresta presiding! All rise!

@kennethlee7319 4 года назад

3:43 😳 Why get so close, your beards going to get caught!😂😂😂 It's the brush!

@nickjm37fordel1 4 года назад

Jimmy " I'll just go to my drawer of brass rods " :-))

@tracybowling97 3 года назад

Making things looks so fun. Your imagination is your limit. Except your imagination is unlimited!

@FredMcIntyre 4 года назад

Awesome work Jimmy! 😃👍🏻👊🏻 ..... You really did it justice! 😉..... 🧑🏻‍⚖️⚖️

@industrialarts3921 4 года назад

I was having creative constipation - watching this got me back in the right headspace. Great video - thank you Jimmy!

@protect.your.digits.creations 4 года назад

Hear Ye HEAR Ye the courts in session the Honorable James DiResta presiding.. Beautiful my brother .. Stay well Taylor and Willie and you my brother

@clydebalcom8252 4 года назад

This is why I like your style. You think so far outside the box, you throw the box away and just have fun.

@ScrewsAndTools 4 года назад

Hello Jimmy, as always your work has impressed me and I'm surprised. You Are A Master! Thank's. Like it.

@perro_dinamita 4 года назад

Everybody stand up!! The Honorable Diresta presides over the court!!! xaxaxa

@Rowrowthegravyboat 4 года назад

I’m still pretty sure the balls on this man are second to none. Free hand turning brass with a razor blade and chisel. (At least clean up work) in all my years of RU-vid commenting, JD is still the only one I have seen do this. Keep changing the world Jimmy!

@jimmydiresta 4 года назад

👊🏼👊🏼

@bones357 4 года назад

Through so much hard work and talent from Jimmy and others like him, Justice, and art, will be served. Here's to the next American renaissance!!!

@Andrea-bw8xm 4 года назад

Nice treat for a gray Sunday...a Diresta video ..thanks. I like your style and am in awe of your talent and skill!

@motaman8074 4 года назад

You've got a lot of brass making such a great looking gavel.

@allenwilson9656 4 года назад

I love to watch a true craftsman with a lathe , It amazes me what you can do with one great job and project 👍

@jakedevries1455 4 года назад

This is so satisfying watching you turn that brass on a lathe especially by hand with a razor blade.

@thomasthompson6799 4 года назад

Perfect combination of machine skills and artistry. Excellent!

@Retroweld 4 года назад

Perfection. Years of skills shown in 15 minutes. 🙌

@Warshipmodelsunderway 4 года назад

I learned a couple of new tricks on this one, especially threading on the lathe. Thanks!

@icerazar713 4 года назад

Really nice work. That was so cool to watch. Thank you.

@ericstoever9577 4 года назад

Congrats to your friend, and thanks for sharing the versatility of the simple boxcutter blade!

@JeffGloverArts 4 года назад

While the craftsmanship in the end product is as outstanding as usual, the video storytelling has reached a new height. Bravo, sir!

@jimmydiresta 4 года назад

Thank you 🙏🏼

@RRINTHESHOP 4 года назад

Nicely done. Great gavel.

@mftmachining 4 года назад

Excellent job with some very interesting techniques...hats off...top

@importfto 4 года назад

It's like a rough arse clickspring. Love it

@cptmrgans 4 года назад

It was super satisfying watching you turn that metal... super sleek finished product!

@andrewmortimer3317 4 года назад

I enjoyed watching the video edits on Instagram. It made me appreciate the video more and look for the edit points. Great work as always.

@OriginalRaveParty 4 года назад

Brilliant machining

@lordfever5b.e.83 3 года назад

Well done Jimmy been following your work since early 2000

@jimmydiresta 3 года назад

Thank you 🙏🏼

@garthbutton699 4 года назад

Come on Jimmy,be honest with us you really didn't have a plan when you started making this gavel,but the juices started to flow and another masterpiece is created.Thank you so much for allowing us to look over your shoulder once again,I am continiously inspired by your inspirations🤗🤗🤗

@jimmydiresta 4 года назад

I had a sketch. Not very tight one

@adriennefraschetta5391 4 года назад

Beautiful mallet and block.

@FabriDragon 4 года назад

I can see you use the “hammer till it’s true” method when indicating in the lathe chuck.

@greatitbroke 4 года назад

Awesome video. Thanks Jimmy.

@StygianBlood 4 года назад

Everything is amazing but my ocd with things can't help but see the irony in advertising precision tools shortly after making the threads nonconcentric with the rest of the handle

@xenonram 4 года назад

... bUt mY oCd

@cjc1216 4 года назад

This is for when people in the court room are getting extra rowdy, the judge hits his desk with this shit people are gonna hear it for sure.

@Hinkleshop 4 года назад

That thing gives new meaning to dropping the hammer of justice excellent work my friend!

@k.cashman427 4 года назад

Court is now in session with the Honorable James Diresta presiding. Well done!

@JacobRumsey 4 года назад

Another banger from Diresta

@FigmentsMade 4 года назад

They'll be hearing that in the back of the courtroom! Beautiful! And using a razor? Epic!

@himdabo 4 года назад

This channel and the Essential Craftsman’s channel have greatly inspired me (and certainly many others). Thanks for the great work you do, Jimmy.

@christopherdubour6662 4 года назад

I’ve only done very basic lathing without much direction, and you’ve just shown me a basic way to make very nice curves and tapers. I think that freehand razor blade sculpting is brilliant

@JuanBataan 4 года назад

I learned many things by watching jimmys videos. I remember those segment from trash to cash.

@bfarney6672 4 года назад

One of the most talented and nicest guys ever!!

@nogardniwt 4 года назад

Wow, really shows how soft brass is. Never thought a razor blade would work.

@Dopefish76 4 года назад

The style of the video (not to mention the end product itself) reminded me of the hardwood mallet you did for Make in 2013. I dunno if maybe I have a thing with mallets, but I found myself feeling that same sense of “where is this going? 😃” and then that big payoff where it all *clicks*. For those wondering, this is Classic DiResta 🤘🏻

@springwoodcottage4248 4 года назад

Interesting design & materials with elegant, gentle & decisive execution on the lathe. In the UK gavels are often made of Box wood, both the head & the base, but this has a more higher pitched component to it which is interesting. Just hope the judge does not forget where his/her non-hammer hand is when dealing with disorders in court and clouts it by mistake. If ever does will not need reminding a second time. Thanks for sharing!

@AntonioClaudioMichael 4 года назад

Neet trick with the box cutter blade @Jimmy Diresta

@Phoeff99 4 года назад

Beautiful work. A nice counterbore in the head would make the handle disappear into when screwed tight. Looks great. 👍🏻👍🏻

@seanalbertson7836 4 года назад

I’ll never get sick of these videos

@Vault57 4 года назад

Have to say, I thumped myself on the forehead when I saw the centering tool on the backside of the tap! But of course! Jimmy always teaches me something new!

@germanbrunini5204 4 года назад

Kid's day in argentina, and this video is my gift!!! Cool!!

@jumpyspiderlady8454 4 года назад

Very pretty result!

@mathdoc1 4 года назад

Shine baby, shine!! Jimmy at It’s best!!!

@rickvanhooren548 4 года назад

I feel like I need to appear in that courtroom to hear that AMAZING gavel sound. BeUtiful as always!

@scrapperdscrapperj3948 4 года назад

Love the gavel 👍👍

@troyam6607 4 года назад

Hey Jimmy! if you put some tape around the end of your tool on the lathe when doing brass the chips will just fall down not fly everywhere. just wrap it around the end and start a cut it will tear only where the tip is

@Curtislow2 4 года назад

Will Come in Handy when judging the "GREAT GUITAR BUILD OFF"!

@125spectrum 4 года назад

I love the "difference" between Abomb's approach and Jimmy's more artistic, by eye approach. I like both but it's interesting to see both artisan's way of working. Great content. Thanks. Paul

@9009matorres 4 года назад

First Adam savage makes giant nut and bolt, now diresta with the gavel...I’m digging it

@RestorationModels 4 года назад

Jimmy is now the judge.

@rldoyle5705 4 года назад

Cool hand work on brass love me some Starrett tools and made in USA thanks for the vid

@cdnsoundguy 4 года назад

Great job Jimmy. Hope your enjoying you summer.

@trevhaydon5090 4 года назад

This is a truly wonderful video, Jimmy. Thank you for sharing. Stay safe brother. All the best from North London UK

@bjornhammarstrom5621 4 года назад

Order in Court!!!

@larrykelly2838 4 года назад

Very nice, the Judge would say, "NOT GUILTY".

@dvldgz6306 4 года назад

The band saw and lathe God back at it again making this awesome piece.

@davebauerart 4 года назад

Love the hand sculpted aspects, reminds me of the brass chess pieces you made. I noticed you used the side of the utility blade and not just the edge.

@Lutzboater 4 года назад

The Liberace of the lathe.

@sixft7in 4 года назад

Of all the amazing tools he has in his shop, Jimmy uses a razor blade to fine tune the shape of the brass. I kept hoping he wasn't going to cut himself on it. EDIT: Brass, not bronze.

@MCsCreations 4 года назад

Really amazing work, Jimmy! 😃 My father watched with me (he loves work with the lathe) and he said it couldn't be nicer! 😃 Stay safe there with your family! 🖖😊

@Rutce125 4 года назад

I am not ashamed to admit that projects like this are the reason I have a serious man crush on this guy! You constantly inspire me, Jimmy! PS when are we getting another farm shop update?

@jimmydiresta 4 года назад

Thank you !

@jimmydiresta 4 года назад

Next vlog

@GeorgeMadeThis 4 года назад

Just lovely! If I had a metal lathe, all I’d be making would be mallets and hammers...

@MikeGaboury 4 года назад

Now THAT is a solid understanding of the hierarchy of materials.

@yellowmuginc 4 года назад

Edited perfectly to keep my day moving! Hammer Time!

@masterofnone 4 года назад

I am guilty , of loving this video!

@winer6010 4 года назад

Love and support from Pakistan. Keep that spirit alive Jimmy, an inspiration to me always.

@heyimamaker 4 года назад

8:20 😳 the curls!

@standswithfish 4 года назад

Cool project! Always learn something watching your vids- your use of a razor to finish curves was unique. Great to hear of the special offer with Starrett. Still producing quality tools here. When allowed take a plant tour. In the meantime NYC CNC filmed one a few years ago. (We have added considerable amount of modern machinery, but still have some old ones producing)!

@ConnorHolland 4 года назад

I don't judge, but that's some great lathing

@NicheEngineering 4 года назад

Nice work! I think the key to keep people watching is to up the sketch-factor every other minute or so, well done!

@alanmarston8612 4 года назад

Nice work.

@airwolf28 4 года назад

Jimmy, technique or no technique, you are still the best.. Keep up the great job... I thought you are going to buff the gavel.

@joshhibbs_nola 4 года назад

SO AWESOME! You need the wooden base though so you can get that dull loud thud when the judge bangs the gavel down. Still badass though. 🤙🏼

@thomaslevy2119 4 года назад

A solid brass gavel for a judge? Wow. He must REALLY want to get people's attention in his courtroom. BAM! BAM! Court in now insession! (He might break his bench with it!) Great. Also the best use of an old library card catalog case I've seen yet.