No video :(

Display exchange & repair for Audi TT 8N

Подписаться 2,4 тыс.

Просмотров 30 тыс.

50% 1

Display exchange & repair for Audi TT 8N
In this video we exchange the LCD display of a Audi TT combi instrument and install a new one.
Very fast and easy.
Order the repair online now:
www.pixelfehle...
Oder the spare part directly online here:
www.pixelfehle...
*Get the special tools here:*
Mini crow bar: www.pixelfehle...
Soldering Grease: www.pixelfehle...
------------------------------------
🛎 Hit Subscribe and activate the bell!
🖥 Our online shop with all parts needed for the repairs: www.pixelfehle...
You've got a question regarding parts or the repair?
📧 Drop us a mail: info@pixelfehler-hh.de

Опубликовано:

4 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@gilaberzas 2 года назад

Thanks!! Best video on youtube, following it I was able to fix my cluster with no previous soldering experience!! I had you by my side all the time :D I broke some traces (own fault) when taking the old LCD out, due to too much force and not applying enough heat.... Luckily I managed to hotwire them and the new display works. It was a hell of a fight though 😵‍💫

@donjohnson3701 Год назад

Great video! You have the precision of a Suisse watchmaker! Beautiful job. You took the mystery out of fixing my display.

@pixelfehlerhamburg9956 Год назад

Thanks a lot Don!

@user-wb8lh3pb6s Год назад

Thank you very much! I replaced mine with an 6dollar one from AliExpress. The problems that I encountered are: Difficulty removing temp and gas needles. Immobilizer didn't work for an hour after connecting back the dash

@rashidjafar 3 года назад

You can get AUDI TT display ones from china which is already offset with cables. The lcd used in this video is for AUDI's VDO. You should have choosen LCD compatible with AUDI TT ones. Which fits properly and no need to bend the ribbon cables after install. Just a suggestion :)

@pixelfehlerhamburg9956 3 года назад

Hi Rashid, thanks for your comment. But you can't compare our LCD with the standard quality from China. Ours are much better. The LCD we install in the TT has a universal cable. Therefore it fits in Jaeger and VDO. We developed it especially so that you only need 1 LCD for both versions! ;)

@rashidjafar 3 года назад

@@pixelfehlerhamburg9956 i liked that idea !

@saxophone.4513 Год назад

Great information. I would have worn watchmaker fingertip covers while touching the black dial. Would have been nice to clean the inside of the glass on the display clocks when you had the front cover off.

@gabem7232 10 месяцев назад

So i replaced the cluster on my 2002 audi tt from another car and rpm gauge doesn't work . It's a rebuilt unit contacted seller and reason is the cluster needs to be programmed to the car. Anybody know if this is correct ?

@pjmccracken Год назад

What needs to be wired on the blue connector for bench testing, is it just 12v and GND or are there other pins needed ? Thanks!

@pixelfehlerhamburg9956 Год назад

The pin out is in the video. Only 12 v and GND is required

@pjmccracken Год назад

@@pixelfehlerhamburg9956 Thanks that was a bit of a dodo moment right there... always RTM or at least watch the whole video ;)

@keithazzopardi3638 Год назад

Hi, well done for this job, I have issue with the temp gauge, the pointer is not moving, staying on 50c, have idea what can be ?

@pixelfehlerhamburg9956 Год назад

There a some possibilities. Maybe the sensor? The stepper motor or other things on the pcb. Start with checking the sensor

@FM-MA- Год назад

Welcome, I want a way to connect electricity wires to the Santa Fe 2005 dashboard

@ironkcoony 3 месяца назад

Sehr detailiertes Video, Ersatzdisplay bereits bei euch bestellt und sollte bald ankommen. Habe seit kurzem einen TT, neben dem Pixelfehler auch das Phänomen das nur mit Zündung, ohne laufendem Motor, die Öldruckwarnung mit Warnton erscheint. Habe mich daraufhin belesen, neben Sensor und Kabel könnte wohl es auch am KI selbst liegen - habt ihr hierzu Erfahrungen bzw. bietet ihr eine Reparatur an? Beste Grüße

@pixelfehlerhamburg9956 3 месяца назад

Hallo, melde dich doch mal per Mail support@pixelfehler-hh.de

@MADVIC1000 2 месяца назад

mine would only work with Pin 1----12v + Pin7---- 12v- Pin23 ---12v+

@curlyhairdudeify Год назад

I got mine fixed, but now it sounds like a washing machine. What would cause a "washing machine" (loose gear) like sound when plugged to the car?

@pixelfehlerhamburg9956 Год назад

Sorry i don´t know what you mean

@Xappt 2 года назад

Zunächst sehr gutes Videos, hervorragend erklärt und professionell durchgeführt! Eine Frage bleibt mir noch: Bei dunklen Stellen ist dann der Prozessor defekt oder einfach die SMDs die nach den Jahren den Geist aufheben?

@pixelfehlerhamburg9956 2 года назад

Hallo, was meinen Sie mit dunklen Stellen?

@Xappt 2 года назад

@@pixelfehlerhamburg9956 zum Beispiel leuchtet beim abbiegen links die led nicht im KI, Zeiger leuchten teilweise nicht und manche stellen der Hintergrundbeleuchtung funktionieren auch nicht. Edit: habe jetzt alle smds neu aufgelötet und der Fehler ist weiterhin. Wenn ich das Board allerdings an den Tester anschließe und dann etwas hin und her biege leuchten mal alle SMDs und mal wieder nicht. Es ist auch ein elektrisches „Brummen“ bei eingeschaltetem Licht zu vernehmen. Der Ursprung ist links auf de Platine. Wäre sehr dankbar für einen Rat.

@VikingDav 2 года назад

Do u have a video on how to change the surface led lights on the cluster

@pixelfehlerhamburg9956 2 года назад

no sorry

@stefancbr900rr7 Месяц назад

Hello, are you still fixing it or selling fixed speedometer for Audi tt 8N

@pixelfehlerhamburg9956 Месяц назад

Hello, we are still fixing.. but until 19.July2024 is vacation

@maverick_tt 3 года назад

Great video, will do my TT tacho soon. Could you explain how to power the tacho on the bench ? I have no plug spare. Thanks :)

@pixelfehlerhamburg9956 3 года назад

Hi, we have the connector pinout in the video!

@filipposcalia5000 3 года назад

Did you use the Vag com cable to set the indicator?

@pixelfehlerhamburg9956 3 года назад

No just 12V and ground

@UptownFights 2 года назад

Hi, I just did my lcd and the screen has lots of specks of red and I noticed some of the words are backwards 😅 . Did I solder it on backwards? Looks same as yours.

@pixelfehlerhamburg9956 2 года назад

I don´t know without any pictures. Maybe some older issues.

@UptownFights 2 года назад

@@pixelfehlerhamburg9956 I got it fixed. Just too much solder. I removed it and cleaned it up and made it work. I also fixed the fuel and temp guage illumination by resoldering the resister above lcd screen. But I need to figure out what to do to fix the speedometer needle illumination. Is goes off and on when bumped.

@61Husky 2 года назад

Hi can I use a new display from you to replace an old one at the dashboard from AUDI TT 8J 2009 without having any problems with the immobiliser system? Do you shipping worldwide? Thank you 🙏

@pixelfehlerhamburg9956 2 года назад

sorry for audi 8J we don´t have lcd

@61Husky 2 года назад

@@pixelfehlerhamburg9956 No problem Anyway thank you 🙏

@fenixenmoto4926 3 года назад

muy bueno el video, no entendi nada de lo que dijo pero se puede saber que es lo que hizo

@pixelfehlerhamburg9956 3 года назад

Muchas gracias

@filipposcalia5000 3 года назад

I can't find the "motor" of the gas indicator. How can I find it? what is the proper name or the reference number si i can buy it on autodoc. Thank you

@pixelfehlerhamburg9956 3 года назад

Hello, we have only the cap for a diy repair. But we also have a video for that. The part is here www.pixelfehler-hh.de/Gehaeuse-Cover-Schrittmotor-Audi-TT-A3-A4-A6-Tacho

@filipposcalia5000 3 года назад

@@pixelfehlerhamburg9956 it's out of stock that item, and nobody sells is :(

@GODOY97GT 3 года назад

Hallo, i am carlos from Spain. I have replaced Lcd on my audi tt but screen appears all red. Not showing any images . What is the problem? Danke

@pixelfehlerhamburg9956 3 года назад

Hi Carlos, and you bought our "universal" Lcd? When you solder it there are 4 contacts at the left side not connected. You checked it? You can send me also some pictures. saludos dirk

@GODOY97GT 3 года назад

@@pixelfehlerhamburg9956 thanks , just solved! Aparently bad welding. I re did it using flux and its perfect now; thanks again!